Journals / Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi / 2022 / Cilt: 8 - Sayı: 2

Synthesis of Cu-Cr-B4C-CNF hybrid composites

Pages
90–97
Publication Date
2022-12-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Compared to the undoped copper sample, the hardness value of the Cu-8B4C-6Cr-1CNF hybrid composite increased by approximately 54%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the microstructural properties of Cu-Cr-B4C-CNF hybrid composites produced by powder metallurgy were investigated.
📊
Key Findings & Data:Cu, CrB2, Cr2B3 and C phases were detected in the microstructure.
💡
Conclusion & Impact:Compared to the undoped copper sample, the hardness value of the Cu-8B4C-6Cr-1CNF hybrid composite increased by approximately 54%.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hybrid composite · Copper · CNF

Abstract

In this study, the microstructural properties of Cu-Cr-B4C-CNF hybrid composites produced by powder metallurgy were investigated. While microstructural properties were examined by optical, SEM-EDS and XRD analyzes, hardness test was performed to determine the mechanical properties. The microstructure results, especially the EDS-MAP analysis, showed that the reinforcement elements were relatively homogeneously dispersed in the copper matrix. Since carbon nanofiber has nano size, it was detected in SEM photographs with larger magnification. Cu, CrB2, Cr2B3 and C phases were detected in the microstructure. The hardness of the composite increased with the addition of reinforcement and reached a maximum value (72.5 HB) of 1% of CNF, and after this CNF ratio, a very small decrease in the hardness value occurred. Compared to the undoped copper sample, the hardness value of the Cu-8B4C-6Cr-1CNF hybrid composite increased by approximately 54%.

🔖

Cite This Article

KRİEWAH, O. A. E., ISLAK, S. (2022). Synthesis of Cu-Cr-B4C-CNF hybrid composites. Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, Cilt: 8 - Sayı: 2, 90–97. https://ajindex.com/articles/869569

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Islak, S., Çalıgülü, U., Hraam, H. R., Özorak, C., & Koç, V. (2019). Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Research on Engineering Structures and Materials, 5(2), 137-146. ASM Handbook: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Vol.2, 10th ed., 1990.
  2. Deshpande, P. K., & Lin, R. Y. (2006). Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity. Materials Science and Engineering: A, 418(1-2), 137-145.
  3. Buytoz, S., Dagdelen, F., Islak, S., Kok, M., Kir, D., & Ercan, E. (2014). Effect of the TiC content on microstructure and thermal properties of Cu–TiC composites prepared by powder metallurgy. Journal of Thermal Analysis and Calorimetry, 117(3), 1277-1283.
  4. Chen, H., Jia, C. C., & Li, S. J. (2013). Effect of sintering parameters on the microstructure and thermal conductivity of diamond/Cu composites prepared by high pressure and high temperature infiltration. International Journal of Minerals, Metallurgy, and Materials, 20(2), 180-186.
  5. Azimi, M., & Akbari, G. H. (2011). Development of nano-structure Cu–Zr alloys by the mechanical alloying process. Journal of Alloys and Compounds, 509(1), 27-32.
  6. Islamgaliev, R. K., Nesterov, K. M., Bourgon, J., Champion, Y., & Valiev, R. Z. (2014). Nanostructured Cu-Cr alloy with high strength and electrical conductivity. Journal of Applied Physics, 115(19), 194301. Correia, J. B., Davies, H. A., & Sellars, C. M. (1997). Strengthening in rapidly solidified age hardened Cu-Cr and Cu-Cr-Zr alloys. Acta Materialia, 45(1), 177-190.
  7. Islak, S., Kır, D., & Buytoz, S. (2014). Effect of sintering temperature on electrical and microstructure properties of hot pressed Cu-TiC composites. Science of Sintering, 46(1), 15-21.
  8. Rajkovic, V., Bozic, D., & Jovanovic, M. T. (2010). Effects of copper and Al2O3 particles on characteristics of Cu–Al2O3 composites. Materials & Design, 31(4), 1962-1970.
  9. Yin, J., Yao, D., Xia, Y., Zuo, K., & Zeng, Y. (2014). The effect of modified interfaces on the mechanical property of β-silicon nitride whiskers reinforced Cu matrix composites. Journal of alloys and compounds, 615, 983-988.
  10. Sule, R., Olubambi, P. A., Sigalas, I., Asante, J. K. O., & Garrett, J. C. (2014). Effect of SPS consolidation parameters on submicron Cu and Cu–CNT composites for thermal management. Powder Technology, 258, 198-205.
  11. Peng, W., & Sun, K. (2020). Effects of Cu/graphene interface on the mechanical properties of multilayer Cu