SavedAdd your journal

Journals / Bayburt Üniversitesi Fen Bilimleri Dergisi / 2022 / Cilt: 5 - Sayı: 2

The Atrazine Removal with the Polyaniline Coated Rice Husk as a Cheap Adsorbent

Polianilin Kaplı Prinç Kabuğunun Atrazin Giderimi Üzerine Etkinliği

Nevin ATALAY GENGEÇ
Pages
138–147
Publication Date
2022-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Raw-PANI/RH and used-PANI/RH composites were characterized with FTIR, XRD, and SEM analysis.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a composite of rice husk (RH) modified with polyaniline (PANI) was produced and its potential as an adsorbent in removal of atrazine was investigated.
📊
Key Findings & Data:Within the scope of the study, the effects of contact time (0-480 min), initial pH (3.5- 9.5), initial atrazine concentration (2-25 mg/L), and PANI/RH amount (0-1.6 g) on treatment efficiency were examined.
💡
Conclusion & Impact:Raw-PANI/RH and used-PANI/RH composites were characterized with FTIR, XRD, and SEM analysis.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Adsorpsiyon · Atrazin · Polianilin

Abstract

In this study, a composite of rice husk (RH) modified with polyaniline (PANI) was produced and its potential as an adsorbent in removal of atrazine was investigated. Within the scope of the study, the effects of contact time (0-480 min), initial pH (3.5- 9.5), initial atrazine concentration (2-25 mg/L), and PANI/RH amount (0-1.6 g) on treatment efficiency were examined. The optimum treatment efficiency for atrazine (25 mg/L) was found as 58.3% under 120 min., 5.4 of pH, and 1.0 g/50 ml of adsorbent dosage, and at this condition, adsorption capacities (qt) was calculated as 0.58 mg/g. Furthermore, when the initial atrazine concentration was raised from 2 to 25 mg/L, the removal efficiencies decreased from 81.1 to 60.4 %, but the adsorption capacities (qt) increased from 0.067 to 0.629 mg/g. In addition, the efficiency of the adsorption process was evaluated by applying Langmuir and Freundlich isotherm models. Among the performed isotherm models, Freundlich isotherm provided the best correlation for atrazine and the Freundlich constant related to the sorption capacity was calculated as 2.02 mg/g at an initial pH of 5.4 for the 2.0-25 mg/L atrazine at 25 oC. Raw-PANI/RH and used-PANI/RH composites were characterized with FTIR, XRD, and SEM analysis.

Özet

Literatürde pestisitler için en çok çalışılan uzaklaştırma işlemlerinden biri adsorpsiyondur. Adsorpsiyon prosesi, kesikli proseslerle birçok kirleticinin giderilmesinde çok yüksek arıtma verimleri sağlasa da, tüketilen adsorbanın maliyeti prosesin kullanılabilirliğini sınırlayan en önemli faktördür. Son yıllarda bilim adamları, proses maliyetlerini azaltmak için kompozit adsorbanlara odaklanmışlardır. Bu çalışmada, pirinç kabuğu (RH) (çok ucuz bir doğal üründür) ve polianilin (PANI; yüksek maliyetli ve yüksek arıtma verimi sağlar) kompoziti üretilmiş ve atrazin gideriminde adsorban olarak potansiyeli araştırılmıştır. Çalışma kapsamında atrazin giderimi üzerine uygulama süresi (0-480 dk), başlangıç pH (3.5-9.5), başlangıç atrazin konsantrasyonu (2-25 mg/L) ve PANI/RH miktarının (0-1.6 g) etkileri incelenmiştir. Atrazin (25 mg/L) için optimum arıtma verimi 120 dakika, 5.4 pH ve 1.g/50 ml adsorban dozunda % 58.3 olarak bulunmuş ve bu durumda adsorpsiyon kapasiteleri (qt) 0.58 mg/g olarak hesaplanmıştır. Ayrıca, başlangıç atrazin konsantrasyonu 2'den 25 mg/L'ye yükseltildiğinde, giderim verimlerinin % 81.1'den % 60.4'e düştüğü, ancak adsorpsiyon kapasitelerinin (qt) 0.067'den 0.629 mg/g'ye yükseldiği belirlenmiştir.

🔖

Cite This Article

GENGEÇ, N. A. (2022). The Atrazine Removal with the Polyaniline Coated Rice Husk as a Cheap Adsorbent. Bayburt Üniversitesi Fen Bilimleri Dergisi, Cilt: 5 - Sayı: 2, 138–147. https://ajindex.com/articles/867390

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. S. Wu, H. He, X. Li et al., "Insights into atrazine degradation by persulfate activation using composite of nanoscale zero-valent iron and graphene: Performances and mechanisms," vol. 341, pp. 126–136, 2018
  2. H. He, Y. Liu, S. You et al., "A Review on Recent Treatment Technology for Herbicide Atrazine in Contaminated Environment," 2019
  3. V. Camel, A. Bermond, "Review Paper the Use of Ozone and Associated Oxidation," Water Res vol. 32, pp. 3208–3222, 1998
  4. Ma J, Graham NJD (2000) Degradation of atrazine by manganese-catalysed ozonation - Influence of radical scavengers. Water Res 34:3822–3828.
  5. Acero JL, Stemmler K, Von Gunten U (2000) Degradation kinetics of atrazine and its degradation products with ozone and OH radicals: A predictive tool for drinking water treatment. Environ Sci Technol 34:591– 597.
  6. Sun X, Liu H, Zhang Y, et al (2011) Effects of Cu(II) and humic acid on atrazine photodegradation. J Environ Sci 23:773–777.
  7. Beltrán FJ, Ovejero G, Acedo B (1993) Oxidation of atrazine in water by ultraviolet radiation combined with hydrogen peroxide. Water Res 27:1013–1021.
  8. Chan KH, Chu W (2003) Modeling the reaction kinetics of Fenton’s process on the removal of atrazine. Chemosphere 51:305–311.
  9. Malpass GRP, Salazar-Banda GR, Miwa DW, et al (2013) Comparing atrazine and cyanuric acid electrooxidation on mixed oxide and boron-doped diamond electrodes. Environ Technol (United Kingdom) 34:1043–1051.
  10. Balci B, Oturan N, Cherrier R, Oturan MA (2009) Degradation of atrazine in aqueous medium by electrocatalytically generated hydroxyl radicals. A kinetic and mechanistic study. Water Res 43:1924–1934.
  11. Borràs N, Oliver R, Arias C, Brillas E (2010) Degradation of atrazine by electrochemical advanced oxidation processes using a boron-doped diamond anode. J Phys Chem A 114:6613–6621.
  12. Oturan N, Brillas E, Oturan MA (2012) Unprecedented total mineralization of atrazine and cyanuric acid by anodic oxidation and electro-Fenton with a boron-doped diamond anode. Environ Chem Lett 10:165–170.
  13. Gotsi M, Kalogerakis N, Psillakis E, et al (2005) Elect