Journals / GİDB Dergi / 2020 / Sayı: 18

NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL

Pages
1–1
Publication Date
2020-06-09
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The Ultimate Limit State (ULS) capacities have been estimated to 260 MPa for the upper deck, 205 MPa for the inner bottom and 250 MPa for the bottom shell.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Floating production, storage and offloading systems (FPSOs) are widely used to develop offshore oil and gas fields.
📊
Key Findings & Data:The capacities of the bottom panels are predicted under simultaneously acting lateral pressure (0.249 MPa for inner bottom and 0.146 MPa for the bottom) and axial compression.
💡
Conclusion & Impact:The Ultimate Limit State (ULS) capacities have been estimated to 260 MPa for the upper deck, 205 MPa for the inner bottom and 250 MPa for the bottom shell.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:non-linear finite element · FPSO vessel · axial compression

Abstract

Floating production, storage and offloading systems (FPSOs) are widely used to develop offshore oil and gas fields. FPSOs structures shall be evaluated in order to satisfy the specifications of both in-service and pre-service loading conditions. The key aspects of the structural assessment of FPSOs are the buckling and ultimate strength behaviour of plate panels, stiffened panels and hull girders. The focus of this paper is to address the buckling and ultimate strength criteria for FPSO hull structures. Buckling strength assessment of three panels in FPSO vessel is being carried out using the non-linear finite element code ADVANCE/ABAQUS, where the analyses involve both material inelastic effects and non-linear geometric effects. The capacities of the bottom panels are estimated under simultaneously acting lateral pressure and axial compression. The upper deck is only subjected to axial compression. The three panels are located in the upper deck, the inner bottom and the bottom shell. The capacities of the bottom panels are predicted under simultaneously acting lateral pressure (0.249 MPa for inner bottom and 0.146 MPa for the bottom) and axial compression. For both the bottom and the inner bottom panel the pressure acts from the ballast tank and outward. The upper deck is only subjected to axial compression. The Ultimate Limit State (ULS) capacities have been estimated to 260 MPa for the upper deck, 205 MPa for the inner bottom and 250 MPa for the bottom shell.

🔖

Cite This Article

ÖZGÜÇ, Ö. (2020). NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL. GİDB Dergi, Sayı: 18, 1–1. https://ajindex.com/articles/831458

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. ABAQUS, (2014), “ABAQUS Documentation”. Dassault Systèmes, Providence, RI, USA
  2. Alinia M. (2005). “A study into optimization of stiffeners in plates subjected to shear loading.” Thin-Walled Structures, 43(5):845 - 860
  3. Alinia M. and Dastfan M. (2006). “Behaviour of thin steel plate shear walls regarding frame members.” Journal of Constructional Steel Research, 62(7):730 - 738
  4. Det Norske Veritas (DNVGL). “Buckling Strength Analyses”, DNV Classification Notes No.30.1, July 2014
  5. International Association of Classification Societies (IACS). “Shipbuilding and Repair Quality Standard”, Reprinted March 1998
  6. Health and Safety Executive, (2000). “Collision resistance of ship-based structures to side impact”, OTO 053/2000
  7. International Ship and Offshore Structure Congress (ISSC). (2009). “Ultimate strength. Report of Technical Committee III.1”, International Ship and Offshore Structures Congress, Seoul, Korea, August
  8. Hughes O. F., and Paik J.K., (2010). “Ship structural analysis and design”. The Society of Naval Architects and Marine Engineers (New Jersey)
  9. Gheitasi A. and Alinia M. (2010). “Slenderness classification of unstiffened metal plates under shear loading.” Thin-Walled Structures, 48(7):508 - 518
  10. Ozguc, O. (2019). “Estimation of buckling response of the deck panel in axial compression”. Polish Maritime Research, 4 (104), Vol. 26; pp. 39-46 10.2478/pomr-2019-0064
  11. Rizzo N.A.S, Amante D.A., and Estefen S.F., (2014). “Ultimate shear strength of stiffened panels for offshore structures.” OMAE2014-23155, 33rd International Conference on Ocean, Offshore and Arctic Engineering; vol. 4A: Structures, Safety and Reliability. San Francisco, California, USA
  12. Paik J.K. (2005). “Ultimate strength of dented steel plates under edge shear loads.” ThinWalled Structures, 43(9):1475 – 1492
  13. Paik, J.K., Lee, J. M., and Lee, D. H. (2003). “Ultimate strength of dented steel plates under axial compressive loads.” International Journal of Mechanical Sciences, 45:433-448
  14. Paik J. K., Thayamballi A.K., and Kim B.J. (2001). “Advanced Ultimate Strength Formulations for Ship Plating Under Combined Biaxial Compression/Tension, Edge Shear, and Lateral Pressure Loads.” Marine Technology, 38(1):9-25
  15. Raviprakash A., Prabu B., and Alagumurthi N. (2012). “Residual ultimate compressive strength of dented square plates.” Thin-Walled Structures, 58:32 - 39
  16. Xu M. C. and Soares C. G. (2013). “Assessment of residual ulti