Journals / Yekarum / 2015 / Cilt: 3 - Sayı: 1

Cutting Methods

Kesme Yöntemleri

Journal
Yekarum
Pages
1–1
Publication Date
2015-05-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study began by examining the old and the new cutting method to investigate the cutting process and, in theory, a general knowledge about cutting methods are given.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The nature or the raw materials obtained with different production processes used in textile industry are not in desired sizes and shapes.
📊
Key Findings & Data:We want them to shape the dimensions of the various tools and machines must be used.
💡
Conclusion & Impact:This study began by examining the old and the new cutting method to investigate the cutting process and, in theory, a general knowledge about cutting methods are given.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Tekstil · kesme yöntemleri · Textile

Abstract

The nature or the raw materials obtained with different production processes used in textile industry are not in desired sizes and shapes. We want them to shape the dimensions of the various tools and machines must be used. Therefore, fibers, yarns, fabrics and other textile products are cutting in various production stages. such as making staple fiber in the form of filament, yarn winding, the production of various fancy yarn, woven fabric, cutting of the fabric in the ready to wear, production of nonwovens, obtaining pile fabrics, fibers, yarns, fabrics and other textile products, cutting is applied in various production stages. Material and cutting the materials recently, several cutting method invented and used in addition to these developments in the Cutting method in the production process from the use of mechanical cutting method has not been abandoned. There are no adequate studies in many areas of the textile used in the cutting process. This study began by examining the old and the new cutting method to investigate the cutting process and, in theory, a general knowledge about cutting methods are given.

Özet

Tekstilde doğadan veya değişik üretim süreçleri ile elde edilen hammaddelerin boyutları çoğu zaman istenilen ölçülerde değildir. Bunları istediğimiz ölçülere indirebilmek için çeşitli alet ve makinelerin kullanılması gerekir. Filament halindeki lifleri stapel hale getirme, iplik bobinleme, çeşitli fantezi ipliklerin üretimi, kumaş dokuma, konfeksiyonda kumaşların kesilmesi, dokusuz yüzeylerin üretimi, havlı kumaşların eldesi gibi lif, iplik, kumaş ve diğer tekstil ürünlerine, çeşitli üretim aşamalarında kesme işlemi uygulanır. Son zamanlarda materyal ve malzemelerin kesilmesinde, çok sayıda kesme yöntemi icat edilmiş ve kullanılmaktadır. Kesme yöntemlerindeki bu gelişmenin yanı sıra mekanik kesme yönteminin üretim aşamalarında kullanımından vazgeçilememiştir. Tekstilin pek çok alanda kullanılan kesme işlemlerine ait yeterli araştırma bulunmamaktadır. Bu çalışmada kesme işleminin araştırılmasına eski ve yeni kesme yöntemlerinin incelenmesi ile başlanmış ve teorik olarak kesme yöntemleri hakkında genel bir bilgi verilmiştir.

🔖

Cite This Article

PINARLIK, G., ABDULLA, G. (2015). Cutting Methods. Yekarum, Cilt: 3 - Sayı: 1, 1–1. https://ajindex.com/articles/822767

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Anonim 2009.
  2. Paleolitik Çağ, Erişim Tarihi: 07.10.2014 http://www.anadolumedeniyetlerimuzesi.g ov.tr/TR,77778/paleolitik-cag.html Anonim, 2009.
  3. Neolitik Çağ, Erişim Tarihi: 07.10.2014 http://www.anadolumedeniyetlerimuzesi.g ov.tr/TR,77779/neolitik-yeni--cilalı- cag.html Y. Arslantaş, Paleoletik Çağ’da Elazığ Yöresi, Fırat Üniversitesi Sosyal Bilimler Dergisi, Cilt:18, Sayı:2, Sayfa:367-377, Elazığ, 2008 Anonim, 2009.
  4. Kalkolitik Çağ, Erişim Tarihi: 07.10.2014 http://www.anadolumedeniyetlerimuzesi.g ov.tr/TR,77780/kalkolitik-bakır-tas- cag.html Anonim, 2009.
  5. Eski Tunç Çağı, Erişim Tarihi: 07.10.2014 http://www.anadolumedeniyetlerimuzesi.g ov.tr/TR,77781/eski- tunç-cagi.html H.M. Cobb, 2010. The Life of Harry Bearley (1871-1948). The History of Stainless Steel. ASM International, 2010, S: 41 Y.S. Serficeli, 2001.Meslek Teknolojisi I. Ankara: Form Ofset, 2001.S:87-101
  6. S. Anık, A. Öğür, M. Vural, Termik Kesme Teknolojisi, Gedik Eğitim Vakfı, 1996
  7. A. Akkurt, U. Şeker, F. Ercan, 2002. Aşındırıcılı Su Jetiyle (Awj) Kesmede Elde Edilen Yüzey Özellikleri Yapılan Çalışmaların Değerlendirilmesi, Politeknik Dergisi, 2002. s. 299-309. Cilt 5 Anonim 20 Ultra-Cutter Ultrasonic Cutting Systems, Erişim Tarihi: 02014. http://www.dukane.com/us/PFF_cutting.ht m C.S. Milton, Metal Cutting Principles, Second Edition, Oxford Series on Advanced Manufacturing, Oxford, 2005, ISBN 0-19514206-3, S:1-38
  8. M.P. Groover, Fundamentals of Modern Manufacturing: Material, Prosecesses, and Systems, 4th Edition, USA, 2010, John Wiley&sonsInc. ISBN:978-0470-467002, S:484-490
  9. G. Boothroyd, Fundamental of Metal Machining and Machine Tools, ISBN:0- 07-085057-7, International Student Edition, 1981,
  10. Tokyo, S:61-88
  11. E. Trent, P. Wright, Metal Cutting: Metal Cutting Operations and Terminology, Fourth Edition, 2000,
  12. Butterwort-Heinemann, S:18 T. Atkins, The Science and Engineering of Cutting, First Edition, 2009,
  13. Elsevier Ltd., ISBN:978-0-7506- 8531-3, S:111-127
  14. A.E. Kutlu, M. Monno, R. Bini, Plazma ile Kesme Metoduna Genel Bir Bakış, Mühendis ve Makine, Cilt 46, 581, s. 21-29. Anonim, 2014. Erişim Tarihi: 2014 http://www.thefabricator.com/article/plasm acutting/you-can-plasma-cut-it-but-can- you-weld-itr Y.K. Chen, Y. Lawrence, M. Vijay, Gas Dynamic Effects on Laser Cut Quality, Journal of Manufacturing Process, Vol.3/No:1 (2001)
  15. S.R. Rajpurohit, Prof. D.M. Patel, Striation Mechanizm in Laser Cutting- The Review, InternationalJournal of Engineering Researcand Application (IJERA), Vol.2Issue 2, Mar-Apr