Journals / Mersin Photogrammetry Journal / 2022 / Cilt: 4 - Sayı: 1

3D modeling of car parts by photogrammetric methods: Example of brake discs

Pages
7–13
Publication Date
2022-07-06
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been shown that the mobile photogrammetry method can provide easy applicability, low cost and high accuracy of 0.88 mm.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Re-measurement of existing, manufactured parts and re-creation of 3D models of these parts brought about the concept of reverse engineering.
📊
Key Findings & Data:The basis of all these categories is the concept of making measurements of a part, structure or region and modeling them in 3D, even if they involve different equipment and instruments.
💡
Conclusion & Impact:It has been shown that the mobile photogrammetry method can provide easy applicability, low cost and high accuracy of 0.88 mm.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Reverse engineering · 3D modeling · Photogrammetry

Abstract

Re-measurement of existing, manufactured parts and re-creation of 3D models of these parts brought about the concept of reverse engineering. Reverse engineering has become a frequently applied and utilized concept in processes such as repairing damaged parts, improving used parts, and making new designs based on old parts. One of the main reverse engineering methods widely used by many engineering branches is photogrammetry. Photogrammetry, which includes a wide range of applications from professional cameras to mobile phones, is divided into branches such as terrestrial photogrammetry, aerial photogrammetry and underwater photogrammetry. The basis of all these categories is the concept of making measurements of a part, structure or region and modeling them in 3D, even if they involve different equipment and instruments. In this study, the 3D model of a rear brake disc of a personal passenger car was obtained using mobile photogrammetric methods. In the results section, the applicability of the method was examined in terms of cost, time and accuracy, together with the results of the accuracy analysis. It has been shown that the mobile photogrammetry method can provide easy applicability, low cost and high accuracy of 0.88 mm.

🔖

Cite This Article

KANUN, E., KANUN, G. M., YAKAR, M. (2022). 3D modeling of car parts by photogrammetric methods: Example of brake discs. Mersin Photogrammetry Journal, Cilt: 4 - Sayı: 1, 7–13. https://ajindex.com/articles/790790

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Yakar, M., Murat Yılmaz, H., Yıldız, F., Zeybek, M., Şentürk, H., & Çelik, H. (2009). Silifke-Mersin Bölgesinde Roma Dönemi Eserlerinin 3 Boyutlu Modelleme Çalışması ve Animasyonu. Jeodezi ve Jeoinformasyon Dergisi, (101). Şanlıoğlu, İ., Zeybeka, M., & Karauğuzb, G. (2013). Photogrammetrıc survey and 3D modelıng of Ivrız rock relief in LATE Hittite Era. Mediterranean Archaeology & Archaeometry, 13(2). Yakar, M., & Doğan, Y. (2018). GIS and three-dimensional modeling for cultural heritages. International Journal of Engineering and Geosciences (IJEG), 3(2), 50-55.
  2. Unal, M., Yakar, M., & Yildiz, F. (2004, July). Discontinuity surface roughness measurement techniques and the evaluation of digital photogrammetric method. In Proceedings of the 20th international congress for photogrammetry and remote sensing, ISPRS (Vol. 1103, p. 1108). Yakar, M., Yılmaz, H. M., Güleç, S. A., & Korumaz, M. (2009). Advantage of digital close range photogrammetry in drawing of muqarnas in architecture. Information Technology Journal, 8(2), 202-207.
  3. Alyilmaz, C., Yakar, M., & Yilmaz, H. M. (2010). Drawing of petroglyphs in Mongolia by close range photogrammetry. Scientific Research and Essays, 5(11), 1216-1222.
  4. Yılmaz, H. M., Karabörk, H., & Yakar, M. (2000). Yersel fotogrametrinin kullanım alanları. Niğde Üniversitesi Mühendislik Bilimleri Dergisi, 4(1), 1. Şahin, İ., Şahin, T., & Gökçe, H. (2017). Hasarlı Dişlilerin Tersine Mühendislik Yaklaşımıyla Yeniden Oluşturulması. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 5(2), 485-495.
  5. Che, J., Zhang, Y., Wang, H., Liu, Y., Du, M., Ma, S.,. & Suo, C. (2021). A novel method for analyzing working performance of milling tools based on reverse engineering. Journal of Petroleum Science and Engineering, 197, 107987. Zhang, L., Yuan, J., He, S., Huang, S., Xiong, S., Shi, T., & Xuan, J. (2021). Contact heat transfer analysis between mechanical surfaces based on reverse engineering and FEM. Tribology International, 161, 107097. Singh, S. K., Raval, S., & Banerjee, B. (2021). A robust approach to identify roof bolts in 3D point cloud data captured from a mobile laser scanner. International Journal of Mining Science and Technology, 31(2), 303-312.
  6. Liu, X., Wei, Y., Wu, H., & Zhang, T. (2020). Factor analysis of deformation in resistance spot welding of complex steel sheets based on reverse engineering technology and direct finite element analysis. Journal of Manufacturing Processes, 57, 72-90.
  7. LaRocco, J., & Paeng, D. G. (2020). A functiona