SavedAdd your journal

Journals / Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi / 2021 / Cilt: 7 - Sayı: 1

Investigation of the Usage Areas of Different Fiber Reinforced Concrete

Abdelwahab Z.a. ALTERA
Oğuzhan Yavuz BAYRAKTAR
Burak BODUR
Gökhan KAPLAN
Pages
7–18
Publication Date
2021-06-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also nowadays, it is produced with steel fibers and ultra-high-performance concrete (UHPC).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, the need for concrete to be used in different areas has led to some concrete technology developments.
📊
Key Findings & Data:The fibers are not very effective on the compressive strength of concrete, but they significantly increase the concrete's flexural toughness.
💡
Conclusion & Impact:Also nowadays, it is produced with steel fibers and ultra-high-performance concrete (UHPC).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fibrous concrete · Plastic shrinkage · Toughness

Abstract

Nowadays, the need for concrete to be used in different areas has led to some concrete technology developments. One of the developments in this area is the production of fibrous concrete. It is a material that has a wide application area in fiber concrete, concrete and reinforced concrete building applications. Because of this widespread usage, many studies have been done to improve the properties of concrete. Fiber Reinforced Concrete obtained with different types of fibers added to concrete is one of these studies. Fiber-reinforced concrete; hydraulic cement, aggregate and discontinuous dispersed fibers mixed with water. The fibers are not very effective on the compressive strength of concrete, but they significantly increase the concrete's flexural toughness. Polymer fibers used in concrete are mostly preferred to reduce shrinkage. Metallic fibers such as steel fiber are used to increase toughness. Also nowadays, it is produced with steel fibers and ultra-high-performance concrete (UHPC).

🔖

Cite This Article

ALTERA, A. Z., BAYRAKTAR, O. Y., BODUR, B., KAPLAN, G. (2021). Investigation of the Usage Areas of Different Fiber Reinforced Concrete. Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, Cilt: 7 - Sayı: 1, 7–18. https://ajindex.com/articles/784724

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Bayraktar, O. Y., Citoglu, G. S., Belgin, C. M., & Cetin, M. (2019). Investigation of the mechanical properties of marble dust and silica fume substituted portland cement samples under high temperature effect. Fresenius Environmental Bulletin, 28(5), 3865-3875.
  2. Yao, W., Li, J., & Wu, K. (2003). Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction. Cement and concrete research, 33(1), 27-30.
  3. El-Hacha, R., & Rizkalla, S. H. (2004). Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures. Structural Journal, 101(5), 717-726.
  4. Banthia, N., & Sappakittipakorn, M. (2007). Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cement and Concrete Research, 37(9), 1366-1372.
  5. Hsie, M., Tu, C., & Song, P. S. (2008). Mechanical properties of polypropylene hybrid fiber-reinforced concrete. Materials Science and Engineering: A, 494(1-2), 153-157.
  6. Thomas, J., & Ramaswamy, A. (2007). Mechanical properties of steel fiber-reinforced concrete. Journal of materials in civil engineering, 19(5), 385-392.
  7. Alomayri, T., & Low, I. M. (2013). Synthesis and characterization of mechanical properties in cotton fiber-reinforced geopolymer composites. Journal of Asian Ceramic Societies, 1(1), 30-34. Chawla K.K., (1998).
  8. Fibrous Materials, Cambridge University Pres, Cambridge. Löfgren, I. (2005). Fibre-reinforced Concrete for Industrial Construction-a fracture mechanics approach to material testing and structural analysis. Chalmers University of Technology. ASTM A 820, (1996). Standart Specification for Steel Fibers for FiberReinforced Concrete, The American Society for Testing and Materials, U.S.A. TS 10513, (1992). Beton Takviyesinde Kullanılan Çelik Teller, Türk Standartları Enstitüsü, Ankara.
  9. Lamanna, A. J., Bank, L. C., & Scott, D. W. (2001). Flexural strengthening of reinforced concrete beams using fasteners and fiber-reinforced polymer strips. ACI Structural Journal, 98(3), 368-376.
  10. Kwak, Y. K., Eberhard, M. O., Kim, W. S., & Kim, J. (2002). Shear strength of steel fiber-reinforced concrete beams without stirrups. ACI Structural Journal, 99(4), 530-538.
  11. Toutanji, H. A., & Saafi, M. (2000). Flexural behavior of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars. Structural Journal, 97(5), 712-719.
  12. Chen, J. F., & Teng, J. G. (2003). Shear capacity of fiber-reinforced polymer-strengthened reinforced concrete beams: Fiber reinforced polymer rup