Journals / Journal of Soft Computing and Artificial Intelligence / 2020 / Cilt: 1 - Sayı: 2

Estimation of Cutting Forces Obtained by Machining AISI 1050 Steel with Cryo-Treated and Untreated Cutting Tool Insert by Using Artificial Neural Network

Pages
59–68
Publication Date
2020-12-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For this reason, cutting force was explained by ANN with an acceptable accuracy in this study.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Cutting force is one of most important criteria for evaluating machinability of workpieces.
📊
Key Findings & Data:For this purpose, in present study, prediction of cutting forces obtained by turning AISI 1050 steel with cryo-treated and untreated CVD-coated cutting tool inserts with artificial neural networks (ANN) was investigated.
💡
Conclusion & Impact:For this reason, cutting force was explained by ANN with an acceptable accuracy in this study.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:ANN · Cutting force · Cutting tool insert

Abstract

Cutting force is one of most important criteria for evaluating machinability of workpieces. For this purpose, in present study, prediction of cutting forces obtained by turning AISI 1050 steel with cryo-treated and untreated CVD-coated cutting tool inserts with artificial neural networks (ANN) was investigated. Machining parameters such as feed rate, cutting speed and conditions of cutting tool insert were selected. These parameters were used for input parameters while cutting force was used for output parameter. The employed ANN structure was chosen according to network type, training function, adaption learning function and performance function as feed-forward back propagation, TRAINLM, LEARNGD and MSE, respectively. Thus, the estimation values of cutting forces attained from ANN model during training and experimental values coincide perfectly with the regression lines, which make the R2 = 0.99874 in training. For this reason, cutting force was explained by ANN with an acceptable accuracy in this study.

🔖

Cite This Article

BADAY, Ş., ERSÖZ, O. (2020). Estimation of Cutting Forces Obtained by Machining AISI 1050 Steel with Cryo-Treated and Untreated Cutting Tool Insert by Using Artificial Neural Network. Journal of Soft Computing and Artificial Intelligence, Cilt: 1 - Sayı: 2, 59–68. https://ajindex.com/articles/779581

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. J. Kratochvíl, J. Petrů, M. Pagáč, J. Holubják, and J. Mrazik, “Effect of Chip Breakers on The Cutting Force During The Machining of Steel C45.” Advances in Science and Technology Research Journal, vol. 11, no. 1, pp. 173-178, 2017.
  2. B. Yılmaz, Ş. Karabulut, and A. Güllü, “Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters.” Journal of Manufacturing Processes, vol. 32, pp. 553-563, 2018.
  3. Ş. Baday, H. Başak, and A. Güral, “Analysis of spheroidized AISI 1050 steel in terms of cutting forces and surface quality.” Kovove Mater., vol. 54, pp. 315-320, 2016. Ş. Baday, “Küreselleştirme ısıl işlemi uygulanmış AISI 1050 çeliğin tornalanmasında esas kesme kuvvetlerinin yapay sinir ağları ile modellenmesi.” Technological Applied Sciences, vol. 11, no. 1, pp. 1-9, 2016. M. Hanief,, M.F. Waniand, and M.S. Charoo, “Modeling and prediction of cutting forces during the turning of red brass (C23000) using ANN and regression analysis.” Engineering science and technology, an international journal, vol. 20, no. 3, pp. 1220-1226, 2017.
  4. H. Gürbüz, F. Sönmez, Ş. BADAY, and U. Şeker, “Farklı Talaş Kırıcı Formlarının Esas Kesme Kuvvetlerine Etkisinin Matematiksel Modellenmesi.” Batman Üniversitesi Yaşam Bilimleri Dergisi, vol. 8, no. 2/2, pp. 13-21, 2018. H. Başak, ve Ş. Baday, “Küreselleştirilmiş orta karbonlu bir çeliğin işlenmesinde, kesme parametrelerinin kesme kuvvetleri ve yüzey pürüzlülüğüne etkilerinin regresyon analizi ile modellenmesi.” Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol. 22, no 4, pp. 253-258, 2016.
  5. S. Yagmur, A. Kurt, and U. Seker, “Evaluation and mathematical modeling of delamination and cutting forces in milling of carbon fiber reinforced composite (CFRP) materials.” Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 35, no. 1, pp. 457-465, 2020. H.B. Ulas, and M.T. Ozkan, “Turning processes investigation of materials austenitic, martensitic and duplex stainless steels and prediction of cutting forces using artificial neural network (ANN) techniques.” Indian Journal of Engineering and Materials Sciences, vol. 26, no. 2, pp. 93-104, 2019. G. Uzun, and İ. Çiftçi, “Ç 5140 çeliğinin mekanik özelliklerinin takım aşınması ve kesme kuvvetlerine etkisinin incelenmesi.” Politeknik Dergisi, vol. 15, no. 1, pp. 29-34, 2012.
  6. A.İ. Özkan, İ. Sarıtaş, and S. Yaldız, “Tornalama İşleminde Kesme Kuvvetlerinin ve Takım Ucu Sıcaklığının Yapay Sinir Ağı ile