SavedAdd your journal

Journals / Journal of Scientific Reports-A / 2001 / Sayı: 002

Flotation and Flotation Machines

FLOTASYON ve FLOTASYON MAKİNELERİ

İsmail BENTLİ
Pages
97–110
Publication Date
2001-06-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, research on flotation machines are carried out to reduce environmentalhazards from waste disposal and clean waste/effluent water.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper mainly reviews flotation processes and conventional flotation machinery used inmineral processing applications.
📊
Key Findings & Data:The maindevelopment research activities concentrate on three basic categories.
💡
Conclusion & Impact:Finally, research on flotation machines are carried out to reduce environmentalhazards from waste disposal and clean waste/effluent water.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Flotasyon · Mekanik flotasyon makineleri · Flotasyon kolonu

Abstract

This paper mainly reviews flotation processes and conventional flotation machinery used inmineral processing applications. It also presents geometrical, mechanical ratios andhydrodynamic properties of mechanical flotation machines.Some desired properties of flotation machines are high capacity, low operating cost, lowenergy consumption, great amounts of fine bubble creation and so on. The maindevelopment research activities concentrate on three basic categories. Primarily, therehabilitation of existing flotation machinery are considered, which is most recentlypopular. Secondly, innovation and design of high capacity flotation machines aredeveloped. Finally, research on flotation machines are carried out to reduce environmentalhazards from waste disposal and clean waste/effluent water.

Özet

Bu çalışmada, flotasyon yöntemi ve mevcut klasik fiotasyon makineleri kısaca anlatılmıştır.Mekanik flotasyon makinelerinin tasarımında ve özelliklerinin belirlenmesinde kullanılangeometrik, mekanik oranlar ve hidrodinamik numaralar ise özetlenmiştir.Flotasyon makinelerinden yüksek kapasite, düşük maliyet, enerji tasarrufu, çok incekabarcık çapı vs gibi özellikler istenmektedir. Flotasyon makineleri üzerinde yapılançalışmalar üç temel noktada yoğunlaşmaktadır. Birincisi son yıllarda önemle üzerindedurulan, tesiste kullanılan mekanik flotasyon makinelerinin iyileştirilmesidir. İkincisi,büyük hacimli yeni tasarılar geliştirmektir. Sonuncusu ise çevresel problemleri azaltmakamacıyla katı atıkların geri kazanılması ve atık suların temizlenmesinde artan bir şekildekullanılmasıdır.

🔖

Cite This Article

BENTLİ, İ. (2001). Flotation and Flotation Machines. Journal of Scientific Reports-A, Sayı: 002, 97–110. https://ajindex.com/articles/779524

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Akar, A., 1985, “Cevher Hazırlama Tesis ve Dizaynı” Dokuz Eylül Üniversitesi Müh.- Mim. Fak. MM/MAD-85 EY 01, İzmir, 271 s. Arbiter, N., Harris, C.C., Yap, R.F., 1969, “Hydrodynamics of Flotation Cells” AIME Transactions, V:244, pp 134-148.
  2. Ata S., Önder, Y.Ü., 1997, “Yeni bir Flotasyon Teknolojisi: Jameson Flotasyon Hücresi” Madencilik, C: 36, No: 4, s 21-29.
  3. Atak, S., 1982, “Flotasyon İlkeleri ve Uygulamaları” İTÜ Maden Fakültesi, İstanbul, 222s. Aytekin, Y., Yamık, A., İpekoğlu, Ü., 1988, “Cevher Hazırlama ve Zenginleştirmedeki Gelişmeler” Akdeniz Üniversitesi İsparta Müh. Fak. Dergisi, Maden Müh. Seksiyonu, (Ed) Yamık, S: 1, İsparta, pp 1-13.
  4. Bentli, İ., 2000, “Flotasyon Makine Tasarımı” Osmangazi Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, Eskişehir, 215 s. Bischofberger, C., Schubert, M., 1996, “On the Microprocesses Air Dispersion and Particle-Bubble Attachment in Flotation Machines” Aufbereitungs Technik, V:37, N:5 pp 193-202.
  5. Degner, V.R., 1990, “Mechanical Flotation Machine Design”, Industrial Practice of Fine Coal Processing, SME-AIME, Ch.16, pp 135-146.
  6. Gorain, B.K., Franzidis, J.P., Manlapig, E.V., 1997, “Studies on Impeller Type, Impeller Speed and Air Flow Rate in an Industrial Scale Flotation Cell: Effect of Bubble Surface Area Flux on Flotation Performans” Minerals Engineering, V:10, N:4, pp 367-379.
  7. Harris, C.C., 1976, “Flotation Machines in Flotation” Gaudin Memorial Volume, SMEAIME, V:2, pp 753-815.
  8. Harris, C.C., Khandrika S.M., 1985, “Flotation machine design: Impeller-Stator Interaction” Powder Technology, V:43, pp 273-278.
  9. Harris, C.C., Lepetic V., 1966, “Flotation Cell Design” Society of Mining Engineering, September, pp 67-72.
  10. Kaya, M., 1998,
  11. Flotasyon El Kitabı, Osmangazi Üni. Müh.-Mim. Fak. Maden Müh., Tekam Yayın No: TN98-002-MK, 4.Baskı, Eskişehir, 146 s. Kaya, M., Kurama, H., 1999, “The Role of Flotation in Waste Recycling/Recovery” 8th Balkan Mineral Processing Conference, Belgrade, Yugoslavia, pp 729-736.
  12. Kaya, M., Laplante A.R., 1986a, “Factors influencing design, hydrodynamics, mixing, residence time distribution, scale-up, selection and sizing of mechanical flotation machines” Mineral Separation Systems, Seminar, McGill University 32 p. Kaya, M., Laplante A.R., 1986b, “Investigation of Batch and Continuous Flotation Kinetics in a Modified Denver Laboratory Cell” Canadian Metallurgical Quarterly, V:25 N:l, pp 1- 8. Kaya, M., Laplante, A.R., 1989, “Froth washing in mechanical flotation cells” 21st Canadian Mineral P