Journals / Journal of New Results in Science / 2020 / Cilt: 9 - Sayı: 1

Investigation of the effect of aggregate obtained from Çatakören region in Bolu on the crucial properties of conventional concretes

Pages
53–62
Publication Date
2020-05-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the light of these analyses, it was found that the aggregates produced from Çatakören region was considerable proper and had more usability potential for the production of the traditional concretes meeting the standards.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This current study delved into the not only meticulous characterization of the aggregate obtained from Çatakören region in Bolu but also its usage potential in the production of traditional concretes.
📊
Key Findings & Data:The compressive strength, slump grade, apparent density of the three types of prepared concretes (C25/30, C30/37 and C35/45) as well as microstructural properties of the fractured samples via SEM were investigated in details.
💡
Conclusion & Impact:In the light of these analyses, it was found that the aggregates produced from Çatakören region was considerable proper and had more usability potential for the production of the traditional concretes meeting the standards.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Çatakören aggregate properties · compressive strength · slump grade

Abstract

This current study delved into the not only meticulous characterization of the aggregate obtained from Çatakören region in Bolu but also its usage potential in the production of traditional concretes. The compressive strength, slump grade, apparent density of the three types of prepared concretes (C25/30, C30/37 and C35/45) as well as microstructural properties of the fractured samples via SEM were investigated in details. Furthermore, all the characteristic properties of the component such as cement, set accelerating admixture, water reducing admixture and the aggregates were determined with the aid of analyses carried out according to the relevant standards. As for the aggregate, the physical, qualitative mineralogical, petro-graphic, X-ray diffraction, mechanical besides the grain size distribution limits properties of the aggregates investigated successfully. In the light of these analyses, it was found that the aggregates produced from Çatakören region was considerable proper and had more usability potential for the production of the traditional concretes meeting the standards. Additionally, among the produced concrete samples, the maximum compressive strength value, 51.3 MPa were obtained from C35/45 concrete samples as expected due to the usage of the relatively larger amount of cement and admixture in the production of this concrete. SEM analyses also showed that the formation of better interfacial adhesion and more stronger chemical bonds, especially in C-S-H were formed in the concrete matrix due to the probable decrement in the porosity. Furthermore, it was apparent from the images that there existed voids, space, ettrengites , microcracks besides the structures regarding as C-H and C-S-H in the concrete matrix.

🔖

Cite This Article

ÖZTOPRAK, B. (2020). Investigation of the effect of aggregate obtained from Çatakören region in Bolu on the crucial properties of conventional concretes. Journal of New Results in Science, Cilt: 9 - Sayı: 1, 53–62. https://ajindex.com/articles/777827

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Aksut, Y. S., & Yetgin, S. (2017). The Usability of Volcanic Rocks from Upper Euphrates Part in the Eastern Anatolia Region as Concrete Aggregate. Sigma Journal of Engineering and Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisi, 35(4), 593-608.
  2. Campelo, N. D., Campos, A. M. L. D., & Aragao, A. F. (2019). Comparative analysis of asphalt concrete mixtures employing pebbles and synthetic coarse aggregate of calcined clay in the Amazon region. International Journal of Pavement Engineering, 20(5), 507-518. doi: 10.1080/10298436.2017.1309199. de Oliveira, A. A., Pimentel, M. G., & Picanco, M. D. (2019). Mechanical properties and microstructural analysis of a concrete produced with aggregate from the Brazilian Amazon region. Materia-Rio De Janeiro, 24(4). doi: ARTN e-1251310.1590/S1517-707620190004.0838. Eui-Hwan, H., Ko, Y. S., & Jeon, J. K. (2007). Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled waste concrete fine aggregate. Journal of Industrial and Engineering Chemistry, 13(3), 387-394.
  3. Evangelista, L., Guedes, M., de Brito, J., Ferro, A. C., & Pereira, M. F. (2015). Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste. Construction and Building Materials, 86, 178-188. doi: 10.1016/j.conbuildmat.2015.03.112. Gencel, O. (2011). Physical and mechanical properties of concrete containing hematite as aggregates. Science and Engineering of Composite Materials, 18(3), 191-199. doi: 10.1515/Secm.2011.031. Halvaei, M., Jamshidi, M., & Latifi, M. (2016). Effect of fiber geometry and tenacity on the mechanical properties of fine aggregates concrete. Journal of Industrial Textiles, 45(5), 1083-1099. doi: 10.1177/1528083714553687. Kakae, N., Miyamoto, K., Momma, T., Sawada, S., Kumagai, H., Ohga, Y.,. Abiru, T. (2017). Physical and Thermal Properties of Concrete Subjected to High Temperature. Journal of Advanced Concrete Technology, 15(6), 190-212. doi: 10.3151/jact.15.190. Leman, A. S., Shahidan, S., Yusuf, M. Y., Zuki, S. S. M., & Misnon, N. A. (2017). Workability and Compressive Strength for Concrete With Coconut Shell Aggregate. 9th International Unimas Stem Engineering Conference (Encon 2016) Innovative Solutions for Engineering and Technology Challenges, 87. doi: UNSP 0101710.1051/matecconf/20178701017. Liu, H. L., Shi, J. J., Qu, H. Q., & Ding, D. X. (2019). An investigation on physical, mechanical, leaching and radiation shielding be