SavedAdd your journal

Journals / European Food Science and Engineering / 2020 / Cilt: 1 - Sayı: 1

Optimization of spray drying conditions for microencapsulation of Lactobacillus casei Shirota using response surface methodology

Osman GÜL
Muhammet DERVİŞOĞLU
Pages
1–8
Publication Date
2020-09-14
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The number of microencapsulated cells decreased by 1.11 and 1.77 log cycles during storage at 4 and 24 oC, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The study aimed to determine the process conditions for microencapsulation of Lactobacillus casei Shirota by spray drying with reconstituted skim milk : gum arabic mix (rate constant 3:1 w/w) as encapsulating agent and to evaluate the physical properties of spray dried powder and the cell stability under gastrointestinal conditions and storage.
📊
Key Findings & Data:Air inlet temperature had a major effect on the cell survival, product yield, aw and L* values, but the concentration of feed solution was the only significant factor on product yield, and pump rate effected aw and L* values (P<0.05).
💡
Conclusion & Impact:The number of microencapsulated cells decreased by 1.11 and 1.77 log cycles during storage at 4 and 24 oC, respectively.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Microencapsulation · Lactobacillus casei Shirota · response surface methodology

Abstract

The study aimed to determine the process conditions for microencapsulation of Lactobacillus casei Shirota by spray drying with reconstituted skim milk : gum arabic mix (rate constant 3:1 w/w) as encapsulating agent and to evaluate the physical properties of spray dried powder and the cell stability under gastrointestinal conditions and storage. Air inlet temperature had a major effect on the cell survival, product yield, aw and L* values, but the concentration of feed solution was the only significant factor on product yield, and pump rate effected aw and L* values (P<0.05). According to desirability result (0.812), the model for microencapsulation of probiotic bacteria by spray drying was obtained at following conditions: feed solution concentration of 21.16%, air inlet temperature of 119.55oC and pump rate of 40%. Under optimized conditions, the predicted values close to the experimental values depend on deviation values except aw. The morphological and physicochemical characteristics of the powders produced were acceptable. For the microencapsulated cells, the cell viability was detected as 7.12 log cfu/g after in vitro gastrointestinal treatment. The number of microencapsulated cells decreased by 1.11 and 1.77 log cycles during storage at 4 and 24 oC, respectively.

🔖

Cite This Article

GÜL, O., DERVİŞOĞLU, M. (2020). Optimization of spray drying conditions for microencapsulation of Lactobacillus casei Shirota using response surface methodology. European Food Science and Engineering, Cilt: 1 - Sayı: 1, 1–8. https://ajindex.com/articles/757590

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Ainsley Reid, A., Vuillemard, J. C., Britten, M., Arcand, Y., Farnworth, E., & Champagne, C. P. (2005). Microentrapment of probiotic bacteria in a Ca(2+)-induced whey protein gel and effects on their viability in a dynamic gastro-intestinal model. J Microencapsul, 22(6), 603-619. doi:10.1080/02652040500162840 Anekella, K., & Orsat, V. (2013). Optimization of microencapsulation of probiotics in raspberry juice by spray drying. LWT - Food Science and Technology, 50(1), 17-24. doi:10.1016/j.lwt.2012.08.003 Annan, N. T., Borza, A. D., & Hansen, L. T. (2008). Encapsulation in alginate-coated gelatin microspheres improves survival of the probiotic Bifidobacterium adolescentis 15703T during exposure to simulated gastro-intestinal conditions. Food Research International, 41(2), 184-193. doi:10.1016/j.foodres.2007.11.001 Arepally, D., & Goswami, T. K. (2019). Effect of inlet air temperature and gum Arabic concentration on encapsulation of probiotics by spray drying. LWT - Food Science and Technology, 99, 583-593. doi:10.1016/j.lwt.2018.10.022 Arslan, S., Erbas, M., Tontul, I., & Topuz, A. (2015). Microencapsulation of probiotic Saccharomyces cerevisiae var. boulardii with different wall materials by spray drying. LWT - Food Science and Technology, 63(1), 685-690. doi:10.1016/j.lwt.2015.03.034 Atalar, I., & Dervisoglu, M. (2015). Optimization of spray drying process parameters for kefir powder using response surface methodology. LWT - Food Science and Technology, 60(2), 751-757. doi:10.1016/j.lwt.2014.10.023 Behboudi-Jobbehdar, S., Soukoulis, C., Yonekura, L., & Fisk, I. (2013). Optimization of Spray-Drying Process Conditions for the Production of Maximally Viable MicroencapsulatedL. acidophilusNCIMB 701748. Drying Technology, 31(11), 1274-1283. doi:10.1080/07373937.2013.788509 Broeckx, G., Vandenheuvel, D., Henkens, T., Kiekens, S., van den Broek, M. F. L., Lebeer, S., & Kiekens, F. (2017). Enhancing the viability of Lactobacillus rhamnosus GG after spray drying and during storage. International Journal of Pharmaceutics, 534(1-2), 35-41. doi:10.1016/j.ijpharm.2017.09.075 Burgain, J., Gaiani, C., Cailliez-Grimal, C., Jeandel, C., & Scher, J. (2013). Encapsulation of Lactobacillus rhamnosus GG in microparticles: Influence of casein to whey protein ratio on bacterial survival during digestion. Innovative Food Science & Emerging Technologies, 19, 233-242. doi:10.1016/j.ifset.2013.04.012 Chegini, G. R., & Ghobadian, B. (2007). Spray dryer parameters for fruit juice dryi