SavedAdd your journal

Journals / Bilge International Journal of Science and Technology Research / 2022 / Cilt: 6 - Sayı: 1

Characterization of Chickpea (Cicer arietinum) Stalk Pulp and Evaluation in Paper Production

NOHUT (Cicer arietinum) SAPI KAĞIT HAMURLARININ KARAKTERİZASYONU VE KAĞIT ÜRETİMİNDE DEĞERLENDİRİLMESİ

Mustafa ÇİÇEKLER
Ayşe ÖZDEMİR
Ahmet TUTUŞ
Pages
29–37
Publication Date
2022-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The strength losses that occur during the recycling of waste paper could be reduced by blending the chickpea stalk fibers with secondary fibers and it is possible to produce various paper types such as writing-printing paper by blending the short fiber chickpea stalk fibers and long fibers.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the evaluability of chickpea stalks generated after harvest in chickpea production was investigated in pulp and paper production.
📊
Key Findings & Data:Some chemical, mechanical and optical properties of the pulps produced with the addition of different AQ charges were compared and the optimum results were obtained from the 0.7% AQ added cooking experiment.
💡
Conclusion & Impact:The strength losses that occur during the recycling of waste paper could be reduced by blending the chickpea stalk fibers with secondary fibers and it is possible to produce various paper types such as writing-printing paper by blending the short fiber chickpea stalk fibers and long fibers.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Chickpea stalk · pulp · paper

Abstract

In this study, the evaluability of chickpea stalks generated after harvest in chickpea production was investigated in pulp and paper production. Besides, paper production was carried out by blending the chickpea stalk fibers with primary and secondary fibers in certain proportions and the effects of chickpea stalk fibers on the paper properties were determined. Modified kraft method was used in the pulping of chickpea stalks and anthraquinone (AQ) was added to the cooking solution as a catalyst. Some chemical, mechanical and optical properties of the pulps produced with the addition of different AQ charges were compared and the optimum results were obtained from the 0.7% AQ added cooking experiment. The yield and viscosity values of the chickpea stalk pulps increased by 12.6% and 34.2%, respectively and the kappa number decreased by 46.7% with the addition of AQ to cooking liquor. Paper production was carried out by blending the fibers obtained from optimum cooking condition with primary and secondary fibers in certain rates and the effects of chickpea stalk fibers on the paper properties were examined. Depending on the amount of chickpea stalk fibers, the mechanical properties of the papers produced with secondary fibers and the optical properties of the papers produced with primary fibers improved. The strength losses that occur during the recycling of waste paper could be reduced by blending the chickpea stalk fibers with secondary fibers and it is possible to produce various paper types such as writing-printing paper by blending the short fiber chickpea stalk fibers and long fibers.

Özet

In this study, the evaluability of chickpea stalks generated after harvest in chickpea production was investigated in pulp and paper production. Besides, paper production was carried out by blending the chickpea stalk fibers with primary and secondary fibers in certain proportions and the effects of chickpea stalk fibers on the paper properties were determined. Modified kraft method was used in the pulping of chickpea stalks and anthraquinone (AQ) was added to the cooking solution as a catalyst. Some chemical, mechanical and optical properties of the pulps produced with the addition of different AQ charges were compared and the optimum results were obtained from the 0.7% AQ added cooking experiment. The yield and viscosity values of the chickpea stalk pulps increased by 12.6% and 34.2%, respectively and the kappa number decreased by 46.7% with the addition of AQ to cooking liquor. Paper production was carried out by blending the fibers obtained from optimum cooking condition with primary and secondary fibers in certain rates and the effects of chickpea stalk fibers on the paper properties were examined. Depending on the amount of chickpea stalk fibers, the mechanical properties of the papers produced with secondary fibers and the optical properties of the papers produced with primary fibers improved. The strength losses that occur during the recycling of waste paper could be reduced by blending the chickpea stalk fibers with secondary fibers and it is possible to produce various paper types such as writing-printing paper by blending the short fiber chickpea stalk fibers and long fibers.

🔖

Cite This Article

ÇİÇEKLER, M., ÖZDEMİR, A., TUTUŞ, A. (2022). Characterization of Chickpea (Cicer arietinum) Stalk Pulp and Evaluation in Paper Production. Bilge International Journal of Science and Technology Research, Cilt: 6 - Sayı: 1, 29–37. https://ajindex.com/articles/742600

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Akgül, M., Erdönmez, İ., Çiçekler, M., Tutuş, A. (2018). The Investigations on Pulp and Paper Production with Modified Kraft Pulping Method from Canola (Brassica napus L.) Stalks. Kastamonu University Journal of Forestry Faculty, 18(3), 357–365. https://doi.org/10.17475/kastorman.499091
  2. Ateş, S., Deniz, İ., Kirci, H., Atik, C., Okan, O. T. (2014). Comparison of pulping and bleaching behaviors of some agricultural residues. Turkish Journal of Agriculture and Forestry, 39(1), 144–153. https://doi.org/10.3906/tar-1403-41
  3. Barbash, V. A., Yashchenko, O. V. (2020). Preparation and application of nanocellulose from non-wood plants to improve the quality of paper and cardboard. Applied Nanoscience, 10(8), 2705–2716. https://doi.org/10.1007/s13204-019-01242-8
  4. Bian, H., Gao, Y., Luo, J., Jiao, L., Wu, W., Fang, G., Dai, H. (2019). Lignocellulosic nanofibrils produced using wheat straw and their pulping solid residue: From agricultural waste to cellulose nanomaterials. Waste Management, 91, 1–8. https://doi.org/10.1016/j.wasman.2019.04.052
  5. Biermann, C. J. (1993). Essentials of pulping and papermaking. Academic press. Camarero, S., García, O., Vidal, T., Colom, J., del Río, J. C., Gutiérrez, A., Gras, J. M., Monje, R., Martínez, M. J., Martínez, Á. T. (2004). Efficient bleaching of non-wood high-quality paper pulp using laccase-mediator system. Enzyme and Microbial Technology, 35(2–3), 113–120. https://doi.org/10.1016/j.enzmictec.2003.10.019
  6. Cicekler, M., Tutus, A. (2021). Effects of cellulase enzyme in deinking of Solvent-Based inks from mixed office wastes. Biocatalysis and Biotransformation, 39(2), 152–160. https://doi.org/10.1080/10242422.2020.1834538
  7. Clark, J. A. (1978). Pulp Technology. Miller Freeman Publications. Dai, Y., Sun, Q., Wang, W., Lu, L., Liu, M., Li, J., Yang, S., Sun, Y., Zhang, K., Xu, J., Zheng, W., Hu, Z., Yang, Y., Gao, Y., Chen, Y., Zhang, X., Gao, F., Zhang, Y. (2018). Utilizations of agricultural waste as adsorbent for the removal of contaminants: A review. In Chemosphere (Vol. 211, pp. 235–253). https://doi.org/10.1016/j.chemosphere.2018.06.179
  8. FAO. (2020). Food and Agriculture Organization of the United Nations. http://www.fao.org/faostat/en/#data/FO Fišerová, M., Gigac, J., Melník, P. (2006). Application of anthraquinone in kraft pulping of beech wood. Wood Research, 51(4), 55–68.
  9. Güler, G., Beram, A., (2018). Investigation of physical, mechanical and surface roughness properties of particleboards produced from chicory (Cichorium intybus