Journals / Mimarlık Bilimleri ve Uygulamaları Dergisi / 2020 / Cilt: 5 - Sayı: 2

Reinforced Concrete Prefabricated Systems

Dünya’da ve Türkiye’de Betonarme Prefabrikasyon

Pages
309–320
Publication Date
2020-12-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the study the prefabrication of the structures produced in Turkey generally focus on building infrastructure and industry, but it is seen that the largest share of the production of housing should be spread.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In parallel with the socio-economic and technological developments, rational solutions were sought in construction systems and prefabricated construction systems emerged finally industrialization.
📊
Key Findings & Data:Developments in prefabricated construction systems have increased the need for regulations, standard and technical specifications related to this subject, and encouraged many experimental and theoretical types of research.
💡
Conclusion & Impact:In the study the prefabrication of the structures produced in Turkey generally focus on building infrastructure and industry, but it is seen that the largest share of the production of housing should be spread.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Prefabrikasyon · İnşaat · betonarme prefabrike sistemler

Abstract

In parallel with the socio-economic and technological developments, rational solutions were sought in construction systems and prefabricated construction systems emerged finally industrialization. Developments in prefabricated construction systems have increased the need for regulations, standard and technical specifications related to this subject, and encouraged many experimental and theoretical types of research. While reinforced concrete prefabricated systems are at high levels in developed countries, our country is well below these levels. The ratio of prefabricated production to the number of people is 0,38 m3/person in European countries and 0,02 m3/person in our country. This study summarized the situation in Turkey and world reinforced concrete prefabrication; evaluations were made in Turkey for the use of prefabrication. Also, the effects of economic growth and construction volume on prefabricated construction systems were analyzed through sector reports. In the study the prefabrication of the structures produced in Turkey generally focus on building infrastructure and industry, but it is seen that the largest share of the production of housing should be spread.

Özet

Yaşanan sosyo-ekonomik ve teknolojik gelişmeler paralelinde yapım sistemlerinde rasyonel çözümler aranmış ve endüstrileşmenin bir sonucu olarak prefabrike yapım sistemleri ortaya çıkmıştır. Prefabrike yapım sistemlerindeki gelişmeler, bu konu ile ilgili yönetmelik, standart ve teknik şartnamelere olan gereksinimi artırmış, ayrıca birçok deneysel ve teorik araştırmanın yapılmasını teşvik etmiştir. Betonarme prefabrike sistemler, gelişmiş ülkelerde yüksek seviyelerde kullanılırken ülkemiz bu seviyelerin oldukça altındadır. Prefabrike üretimin kişi sayısına oranı Avrupa ülkelerinde 0,38 m3/kişi iken ülkemizde 0,02 m3/kişidir. Bu çalışmada betonarme prefabrikasyonun dünyadaki ve Türkiye’deki durumu özetlenmiş, prefabrikasyonun Türkiye’de gelişimi bağlamında kullanımına yönelik değerlendirmeler yapılmıştır. Ayrıca ekonomik büyüme ve inşaat hacminin prefabrike yapım sistemlerinin gelişimine olan etkileri sektör raporlarından alınan veriler doğrultusunda analiz edilmiştir. Bu bağlamda Türkiye’de prefabrikasyonun daha çok altyapı ve endüstri yapılarına odaklandığı ancak yapı üretiminde en büyük payı olan konut üretiminde yaygınlaşmasının gerekliliği görülmektedir. Prefabrike yapım sisteminin kullanım oranının arttırılmasına yönelik öneriler çalışma kapsamında sunulmuştur.

🔖

Cite This Article

SEİTABLAİEV, M. Ö., UMAROĞULLARI, F. (2020). Reinforced Concrete Prefabricated Systems. Mimarlık Bilimleri ve Uygulamaları Dergisi, Cilt: 5 - Sayı: 2, 309–320. https://ajindex.com/articles/691803

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Acar, M.Ş. (2006). Türkiye’de beton prefabrikasyonun tarihçesi. Türkiye Prefabrik Birliği. İstanbul. ISBN:9944-5957-0-5.
  2. Amil, A.P., Aydın, A.C. (2004). Prefabrike Yapıların Başlıca Tasarım İlkeleri. Atatürk Üni. Ziraat Fak. Dergisi, 35 (3-4), 235-240.
  3. Arieff, A. ve Burkhart, B. (2002). Prefab. ISBN 10: 1586851322 / ISBN 13: 9781586851323, Published by Gibbs Smith. Barlow, J., Childerhouse, P., Gann, D., Hong-Minh, S., Naim, M. ve Ozaki, R. (2003). Choice and delivery in housebuilding: lessons from Japan for UK housebuilders. Building Research&Information, v.31, n. 2, 134-145.
  4. Bekiroğlu, D. (2006). Prefabrike Yapıların Depreme Dayanıklı Tasarımı, Onarım ve Güçlendirilmesi. (Yüksek Lisans Tezi). İTÜ FBE İnşaat Mühendisliği Anabilim Dalı, İstanbul.
  5. Blismas, N. ve Wakefield, R. (2009).
  6. Drivers, Constraints and The Future of Off-site manufacture in Australia. Construction Innovation: Information Process Management, 9(1). 72–83.
  7. Boyd, N., Khalfan, M. M. A. ve Maqsood, T. (2012). Off-site Construction of Apartment Buildings. Journal of Architectural Engineering, 19, 51–57.
  8. Çetinkaya, N. (2007). Prefabrik Betonarme Sanayi Yapılarının Deprem Davranışının Deneysel Olarak İncelenmesi (Doktora Tezi). Pamukkale Üniversitesi Fen Bilimleri Enstitüsü, Denizli. Department for Communities and Local Government. (2013). English Housing Survey Homes. London. Dodge Data&Analytics. (2020). Prefabrication and Modular Construction 2020,
  9. Smart Market Report, Assess Address (6.11.2020): www.construction.com Eriksson, P. (2003). Wood Components in Steel and Concrete Buildings In-Fill Exterior wall Panels (Project No. 02077).
  10. Euler Hermes. (2017). Ekonomik Araştırmalar- Global Sektör Raporu - İnşaat. http://www.eulerhermes.com
  11. Farnsworth, C., Warr, R., Weidman, J. ve Mark Hutchings, D. (2015). Effects of CM/GC Project Delivery on Managing Process Risk in Transportation Construction. Journal of Construction Engineering and Management, 142 (3), 04015091. Global Construction. (2011). A global forecast for the construction industry over the next decade to 2020. Published by: Global Construction Perspectives and Oxford Economics. United Kingdom. ISBN: 978-0-9564207-9-4
  12. Gold, R. (2012). Oil and Gas Boom Lifts U.S. Economy. (6.11.2020): http://www.wsj.com/articles/SB10001424052970204652904577195303471199234
  13. Goodier, C.I. ve Gibb, A.G.F. (2007). Future Opportunities for Offsite in the UK. Construction Management and Economics, 25 (6), 585-595.
  14. Jonsson, R. (2009). Prospects for timber frame i