Journals / Horticultural Studies / 2020 / Cilt: 37 - Sayı: 2

Effect of Irrigation Waters in Different Salinity Levels on Crop Yield and Energy Use in Greenhouse Tomato Production in Turkey: A Case Study in Kırklareli Province

Pages
123–133
Publication Date
2020-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was concluded that the optimum method should be on low salinity level and the irrigation water application should be on the level in order to bring the current moisture level to the field capacity.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study was carried out in a quonset type plastic covered unheated greenhouse on the lands of Atatürk Soil Water and Agricultural Meteorology Institute in Kırklareli, Turkey.
📊
Key Findings & Data:In the study, the effect of different salinity and irrigation water levels which were applied to tomato plant, irrigated by drip irrigation in greenhouse, on yield and energy use efficiency was evaluated and the optimum irrigation application was determined.
💡
Conclusion & Impact:It was concluded that the optimum method should be on low salinity level and the irrigation water application should be on the level in order to bring the current moisture level to the field capacity.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Energy use efficiency · Greenhouse · Irrigation

Abstract

This study was carried out in a quonset type plastic covered unheated greenhouse on the lands of Atatürk Soil Water and Agricultural Meteorology Institute in Kırklareli, Turkey. In the study, the effect of different salinity and irrigation water levels which were applied to tomato plant, irrigated by drip irrigation in greenhouse, on yield and energy use efficiency was evaluated and the optimum irrigation application was determined. In the study, ‘Swanson F1’ type tomato was grown as plant material. The trial was carried out on 36 parcels with three repetitions according to split plots trial design and four different irrigation water salinity levels were on main plots and three irrigation levels were on sub plots. The best result was obtained from T1S2 subject in terms of yield and energy use efficiency. The average yield was determined as 109060 kg ha-1 and energy output/input ratio, energy productivity and specific energy were found as 1.51, 1.89 kg MJ-1 and 0.53 MJ kg-1 in T1S2 subject, respectively. It was concluded that the optimum method should be on low salinity level and the irrigation water application should be on the level in order to bring the current moisture level to the field capacity.

🔖

Cite This Article

ÇEBİ, U., AYDIN, B., ÖZER, S., ÖZTÜRK, O. (2020). Effect of Irrigation Waters in Different Salinity Levels on Crop Yield and Energy Use in Greenhouse Tomato Production in Turkey: A Case Study in Kırklareli Province. Horticultural Studies, Cilt: 37 - Sayı: 2, 123–133. https://ajindex.com/articles/671701

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Abdel Gawad, G., Arslan, A., Gaihbe, A., & Kadouri F. (2005). The effects of saline irrigation water management and salt tolerant tomato varieties on sustainable production of tomato in Syria (1999-2002). Agricultural Water Management, 78(1-2): 39-53. Anonymous (2018a). http://bahcebitkileri.cu.edu.tr/upload/nturemis/turkiyeortualti.pdf (Data accessed April 25, 2018). Anonymous (2018b). www.tarim.gov.tr (Date accessed April 25, 2018).
  2. Atay, A.N. (2006). Harran ovası koşullarında damla sulama sistemi ile sulanan biberin tuza dayanımının belirlenmesi. Yüksek Lisans Tezi, Harran Üniversitesi,
  3. Şanlıurfa. Baran, M.F., & Gökdoğan, O. (2014). Karpuz ve kavun yetiştiriciliğinde enerji girdi-çıktı analizi: Kırklareli ili örneği. Anadolu Tarım Bilimleri Dergisi, 29(3): 217-224.
  4. Baran, M.F., Oğuz, H.İ., & Gökdoğan, O. (2016). Determining the energy usage efficiency of walnut (Juglans Regia L.) cultivation in Turkey. Erwerbs-Obstbau, 59(1):77-82.
  5. Bilalis, D., Kamariari, P.E., Karkanis, A., Efthimiadou, A., Zorpas, A., & Kakabouki, I. (2013). Energy inputs, output and productivity in organic and conventional maize and tomato production, under Mediterranean conditions. Notulae Botanicae Horti Agrobotanici, 41(1): 190-194.
  6. Cuartero, J., & Fernandez-Munoz, R. (1999). Tomato and salinity. Scientia Horticulture, 78: 83-125.
  7. Çanakçı, M., & Akıncı, I. (2006). Energy use pattern analyses of greenhouse vegetable production. Energy, 31: 1243–1256.
  8. Çanakçı, M., Topakçı, M., Akıncı, İ., & Özmerzi, A. (2005). Energy use pattern of some field crops and vegetable production: case study for Antalya region, Turkey. Energy and Conversion Management, 46(4): 655–666.
  9. Çetin, B., & Vardar, A. (2008). An economic analysis of energy requirements and input costs for tomato production in Turkey. Renewable Energy, 33(3): 428-433.
  10. Darijani, F., Veisi, H., Khoshbakht, K., Liaghati, H., & Alipour, A. (2012). An input-output energy analysis in intensive agro-ecosystems: a case study of greenhouse cucumber production in Varamin county of Tehran province, Iran. Environmental Sciences, 10(1): 79-90.
  11. De, D., Singh, S., & Chandra, H. (2001) Technological impact on energy consumption in rain fed soybean cultivation in Madhya Pradesh. Applied Energy, 70: 193–213. Dimitrijević, A., Đević, M., Blažin, S., & Blažin, D. (2010). Energy efficiency of the lettuce greenhouse production. http://agris.fao.org/agris-search/search.do?recordID= RS2011000353 (Data accessed: November 25, 2019) Dimitrijević, A., Blažin, S