Journals / Hacettepe Journal of Biology and Chemistry / 2022 / Cilt: 50 - Sayı: 3

High Pressure Resistant Aramid Fiber Reinforced Polymer Matrix Composite Pipe Design

Pages
301–312
Publication Date
2022-08-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Pipe dimensions with an outer diameter of 125mm, which are used as a standard in natural gas infrastructure works, are taken as reference.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a total of 6 different composites were obtained by adding 5%, 10% and 15% chopped aramid fiber reinforcement in 6 mm dimensions to each of the polypropylene and polyethylene matrix elements under the same production method and same conditions.
📊
Key Findings & Data:Pipes are designed considering the mechanical properties of composite materials with 15% aramid fiber added to each matrix element.
💡
Conclusion & Impact:Pipe dimensions with an outer diameter of 125mm, which are used as a standard in natural gas infrastructure works, are taken as reference.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:chopped fiber · polypropylene · polyethylene

Abstract

In this study, a total of 6 different composites were obtained by adding 5%, 10% and 15% chopped aramid fiber reinforcement in 6 mm dimensions to each of the polypropylene and polyethylene matrix elements under the same production method and same conditions. The reinforcement and matrix materials were mixed using the extrusion method and then formed into plates by the press molding technique. Tensile and charpy tests of these composites were performed and their mechanical properties were examined. S/N ratios were calculated for the mechanical properties of the composites and the effect of matrix, fiber and additive ratios on mechanical properties was determined using analysis of variance (ANOVA). According to the Signal/Noise (S/N) ratios and ANOVA results, it was observed that the composites had different effects on the mechanical properties. Pipes are designed considering the mechanical properties of composite materials with 15% aramid fiber added to each matrix element. The composite pipe design to be pressure tested was designed in Solidworks program with a length of 500 mm according to ISO 1167 standards. Pipe dimensions with an outer diameter of 125mm, which are used as a standard in natural gas infrastructure works, are taken as reference.

🔖

Cite This Article

ARI, A., BAYRAM, A. (2022). High Pressure Resistant Aramid Fiber Reinforced Polymer Matrix Composite Pipe Design. Hacettepe Journal of Biology and Chemistry, Cilt: 50 - Sayı: 3, 301–312. https://ajindex.com/articles/669135

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. KK. Kar (Ed.), Composite Materials: Processing, Applications, Characterizations, Springer Berlin, Germany, 2016.
  2. S.Y. Fu, B. Lauke, and E. Mader, Fracture resistance of unfilled and calcite-particle filled ABS composites reinforced by short glass fiber (SGF) under impact load. Composites Part A. 29 (1998) 631–41
  3. T. Harmia, J. Hartikainen and M. Lindner, Long Fiber-Reinforced Thermoplastic Composites in Automotive Applications. Polymer Composites, (2005) 255–262.
  4. T.P. Sathishkumar, S. Satheeshkumar, and J. Naveen, Glass fiber-reinforced polymer composites – a review. Reinforced Plastics and Composites, 33 (2014) 1258-1275
  5. D. S. Choudhari and V. J. Kakhandki, Comprehensive study and analysis of mechanical properties of chopped carbon fibre reinforced nylon 66 composite materials. Materials Today: Proceedings. (2020) Doi: 10.1016/j.matpr.2020.10.828. B. M. İçten, R. Karakuzu, and M. E. Toygar, Failure analysis of woven kevlar fiber reinforced epoxy composites pinned joints. Composite Structures, 73(4) (2006) 443–450 doi: 10.1016/j.compstruct.2005.02.016. B.W. Imes, Glass-Polymer Composite Pipes and Joints: Manufacturing, Testing, and Characterization (Doctoral thesis, West Virginia University, Morgantown) Accessed from database ProQuest Dissertations and Theses. (2018) (UMI No. 10793813) H. Chen, J. Wang, A. Ni, A. Ding, Z. Sun, and X. Han, Effect of novel intumescent flame retardant on mechanical and flame retardant properties of continuous glass fiber reinforced polypropylene composites. Composite Structures, 203 (2018) 894–902 P. K. Mallick, 2.18 Particulate Filled and Short Fiber Reinforced Polymer Composites. Comprehensive Composite Materials II. (2018) 360–400. doi:10.1016/b978-0-12-803581-8.03837-6
  6. H.-Q. Xie, S. Zhang and D. Xie, An efficient way to improve the mechanical properties of polypropylene/short glass fiber composites. Applied Polymer Science, 96(4) (2005) 1414–1420 doi:10.1002/app.21575 S. Panthapulakkal and M. Sain, Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites—Mechanical, water absorption and thermal properties. Applied Polymer Science, 103(4) (2006) 2432–2441 doi:10.1002/app.25486. J. O. Akindoyo, M. D. H. Beg, S. Ghazali, H. P. Heim, M. Feldmann, and M. Mariatti Simultaneous impact modified and chain extended glass fiber reinforced poly(lactic acid) composites: Mechanical, thermal, crystallization, and dynamic mechanical performance. Applied Polymer Science, (2020) 49752. Doi:10.1002/app.49752.