SavedAdd your journal

Journals / El-Cezeri / 2022 / Cilt: 9 - Sayı: 2

Simulation study on deformation behavior of sandwich panels with corrugated cores

Oluklu Çekirdekli Sandviç Panellerin Deformasyon Davranışı Üzerine Simulasyon Çalışması

Çetin KARAKAYA
Seçil EKŞİ
Journal
El-Cezeri
Pages
843–852
Publication Date
2022-05-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The sandwich panel with the highest specific carrying and specific energy capacity is the trapezoidal core panel.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the deformation behaviour of sandwich panels structures with different configurations of corrugated cores under the effect of quasi-static bending loading is investigated numerically.
📊
Key Findings & Data:The corrugated core is consists of cast polyamide (PA6) material with circular, sinusoidal, rectangular, trapezoid, and triangular geometries.
💡
Conclusion & Impact:The sandwich panel with the highest specific carrying and specific energy capacity is the trapezoidal core panel.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:sandviç panel · deformasyon · oluklu çekirdek

Abstract

In this study, the deformation behaviour of sandwich panels structures with different configurations of corrugated cores under the effect of quasi-static bending loading is investigated numerically. The corrugated core is consists of cast polyamide (PA6) material with circular, sinusoidal, rectangular, trapezoid, and triangular geometries. An Aluminum 6063-T5 plate is used as the skin of the sandwich panel. According to the analysis results, the sandwich panel with a trapezoidal core provided the highest deformation resistance with 6363.6 N. The circular core sandwich panel showed the lowest deformation resistance with 4262.5 N. The sandwich panel with the highest specific carrying and specific energy capacity is the trapezoidal core panel.

Özet

Bu çalışmada, farklı oluklu çekirdek konfigürasyonlarına sahip sandviç panel yapılarının yarı statik eğilme yükü etkisi altındaki deformasyon davranışı sayısal olarak incelenmiştir. Oluklu çekirdek, dairesel, sinüzoidal, dikdörtgen, yamuk ve üçgen geometrilere sahip dökme poliamid (PA6) malzemeden oluşur. Sandviç panelde yüzey kabuğu olarak Alüminyum 6063-T5 plaka kullanılmıştır. Analiz sonuçlarına göre en yüksek deformasyon direncini 6363.6 N ile trapez çekirdekli sandviç panel sağlamıştır. Dairesel çekirdekli sandviç panel ise 4262.5 N ile en düşük deformasyon direncini göstermiştir. Özgül taşıma ve özgül enerji etme kapasitesi en yüksek olan sandviç panel trapez çekirdekli paneldir.

🔖

Cite This Article

KARAKAYA, Ç., EKŞİ, S. (2022). Simulation study on deformation behavior of sandwich panels with corrugated cores. El-Cezeri, Cilt: 9 - Sayı: 2, 843–852. https://ajindex.com/articles/662621

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Arunkumar, M.P., Pitchaimani J., Gangadharan, K.V., Bending and free vibration analysis of foam-filled truss core sandwich panel, Journal of Sandwich Structures and Materials, 2016, 0(00), 1-22.
  2. ZU, G-Y., LU, R-H., LI, X-B., ZHONG, Z-Y., MA, X-J., HAN, M-B., YAO, G-C., Three-point bending behavior of aluminum foam sandwich with steel panel, Trans. Nonferrous Met. Soc. China, 2013, 23, 2491−2495. Sun, G., Wang, E., Wang, H., Xiao, Z., Qing Li, Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores, Materials and Design, 2018, 160, 1117–1136.
  3. Zhu, Y., Sun, Y., Dynamic response of foam core sandwich panel with composite facesheets during low-velocity impact and penetration, International Journal of Impact Engineering, 2020, 139, 103508. Liu, Q., Fu, J., Wang, J., Ma, J., Chen, H., Li, Q., Hui, D., Axial and lateral crushing responses of aluminum honeycombs filled with EPP foam, Composites Part B, 2017, 130, 236-247.
  4. Vignjevi, R., Campbell, J., Hughes, K., Orłowski, M., Garce, S., Withers, P., Reed, J., Soft body impact resistance of composite foam core sandwich panels with unidirectional corrugated and tubular reinforcements, International Journal of Impact Engineering, 2019, 132, 103320. Lia, Z., Zheng, Z., Yu, J., Lu, F., Deformation and perforation of sandwich panels with aluminum-foam core at elevated temperatures, International Journal of Impact Engineering, 2017, 109, 366-377.
  5. Xi, H., Tang, L., Luo, S., Liu, Y., Jiang, Z. Liu, Z., A numerical study of temperature effect on the penetration of aluminum foam sandwich panels under impact, Composites Part B, 2017, 130, 217-229.
  6. Liu, C., Zhang, Y.X., Ye, L., High velocity impact responses of sandwich panels with metal fibre laminate skins and aluminium foam core, International Journal of Impact Engineering, 2017, 100, 139-153,
  7. Önal, T., TEMİZ, Ş., Experimental Investigation of Impact Behavior of Balsa Core Sandwich Composites, El-Cezerî Journal of Science and Engineering, 2021, 8(1), 333-345.
  8. Xiong, J., Maa, L., Stocchi, A., Yang, J., Wua, L., Pan, S., Bending response of carbon fiber composite sandwich beams with three dimensional honeycomb cores, Composite Structures, 2014, 108, 234-242.
  9. Sun, G., Chen, D., Wang, H., Hazell, P.J., Li, Q., High-velocity impact behavior of aluminium honeycomb sandwich panels with different structural configurations, International Journal of Impact Engineering, 2018, 122, 119-136.
  10. Zhang, D., Jiang, D., Fei, Q., Wu, S., Experimental and