Journals / El-Cezeri / 2022 / Cilt: 9 - Sayı: 3

Torque Effects of the Stator Slot Opening Geometry Error in Production of Axial Flux PM Motors

Eksenel Akılı PM Motorlarının Üretiminde Stator Olukları Açarken Gerçekleşen Hataların Moment Etkileri

Journal
El-Cezeri
Pages
1005–1012
Publication Date
2022-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results show that slot opening errors have impacts on the torque ripples.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Axial flux permanent magnet machines (AFPM) became popular due to their effective profile.
📊
Key Findings & Data:An analytical model has been used to demonstrate the problem.
💡
Conclusion & Impact:Results show that slot opening errors have impacts on the torque ripples.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Eksenel akılı Motorlar · Oluk açıklıkları · moment dalgalanması

Abstract

Axial flux permanent magnet machines (AFPM) became popular due to their effective profile. But AFPM machines have hard processes on production. Thus, some errors happen at the slot opening area and these errors affect the torque production. So, torque ripples occur. This paper shows the slot opening errors’ effect on the torque. An analytical model has been used to demonstrate the problem. Also, random slot opening width taken randomly with the ten per cent constraint. Results show that slot opening errors have impacts on the torque ripples.

Özet

Eksenel akılı kalıcı mıknatıslı makineler (AFPM), etkin profilleri nedeniyle popüler hale geldi. Ancak AFPM makinelerinin üretimde zorlu süreçleri vardır. Böylece oluk açma bölgesinde bazı hatalar meydana gelir ve bu hatalar moment üretimini etkiler. Böylece moment dalgalanmaları meydana gelir. Bu çalışma, oluk açma hatalarının moment üzerindeki etkisini göstermektedir. Problemi göstermek için analitik bir model kullanılmıştır. Ayrıca, yüzde on kısıtlaması ile rastgele alınan rasgele oluk açma genişliği kullanılmıştır. Sonuçlar, oluk açma hatalarının moment dalgalanmaları üzerinde etkileri olduğunu göstermektedir.

🔖

Cite This Article

ÇETİN, E. (2022). Torque Effects of the Stator Slot Opening Geometry Error in Production of Axial Flux PM Motors. El-Cezeri, Cilt: 9 - Sayı: 3, 1005–1012. https://ajindex.com/articles/662582

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. M. Aydin et al., Minimization of Cogging Torque in Axial-Flux Permanent-Magnet Machines: Design Concepts, pp.3614 - 3622. IEEE Transactions on magnetics, (Vol. 43, no. 9), September 2007 [2] B. L. Chikouche et al., 2015. Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Machines Using Hybrid Magnet Shapes, pp. 49–61. Progress In Electromagnetics Research B, Vol. 62. [3] B. Ackermann, J. H. H. Janssen, R. Sottek and R. I. van Steen, "New technique for reducing cogging torque in a class of brushless DC motors", Proc. Inst. Elect. Eng.¿Elect. Power Appl., vol. 139, no. 4, pp.315 -320, 1992 [4] T. Ishikawa and G. R. Slemon, "A method of reducing ripple torque in permanent magnet motors without skewing", Magnetics, IEEE Transactions on, vol. 29, pp.2028 -2031, 1993 [5] T. M. Jahns, W. L. Soong, "Pulsating torque minimization techniques for permanent magnet AC motor drives - a review," IEEE Transactions on Industrial Electronics, Vol. 43, No. 2, April 1996, pp. 321-329. [6] D. C. Hanselman,, "Effect of skew, pole count and slot count on brushless motor radial force, cogging torque and back EMF", Inst. Elect. Eng. Proc.& Elect. Power Appl., vol. 144, no. 5, pp.325 -330, 1997 [7] S. M. Hwang, J. B. Eom, G. B. Hwang, W. B. Jeong and Y. H. Jung, "Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing", IEEE Trans. Magnetics, vol. 36, pp.3144 -3146, 2000 [8] S. Paulsamy “Reduction of Cogging Torque in Dual Rotor Permanent Magnet Generator for Direct Coupled Wind Energy Systems”, The Scientific World Journal, Volume 2014, August 2014. [9] N. Bianchi and S. Bolognani, "Design techniques for reducing the cogging torque in surface-mounted PM motors," IEEE Trans. on Industry Applications, vol. 38, no. 5, pp. 1259-1265, September/October 2002. [10] K. Boughrara, B. L. Chikouche, R. Ibtiouen, D. Zarko and O. Touhami, "Analytical model of slotted air-gap surface mounted permanent-magnet synchronous motor with magnet bars magnetized in the shifting direction", IEEE Trans. Magn., vol. 45, no. 2, pp.747 -758, 2009 [11] L. Zhu, S. Z. Jiang, Z. Q. Zhu and C. C. Chan, "Analytical methods for minimizing cogging torque in permanent-magnet machines", IEEE Trans. Magn., vol. 45, no. 4, pp.2023 -2031, 2009 [12] J. H. Choi, J. H. Kim, D. H. Kim and Y. S. Baek, "Design and parametric analysis of axial flux PM motors with minimized cogging torque", IEEE Trans. Magn., vol. 45, no. 6,