SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2018 / Cilt: 20 - Sayı: 58

OPTIMIZATION OF ZnO NANOPARTICLES PREPARED BY SOL-GEL TECHNIQUE

SOL-JEL YÖNTEMİ İLE HAZIRLANMIŞ ZnO NANOPARTİKÜLLERİN OPTİMİZASYONU

N. Funda Ak AZEM
İşıl BİRLİK
Pages
121–127
Publication Date
2018-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results show that the lowest ZnO nanoparticles size obtained with precursor solution prepared at 0.005M and calcined at 400 °C

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Zinc oxide (ZnO) nanoparticles can potentially be applied to photo-catalysis, composite materials, chemical, gas, vapor, and humidity sensors and dye-sensitized solar cells due to their excellent optical, electrical, mechanical and chemical properties.
📊
Key Findings & Data:ZnO nanoparticles were prepared from zinc acetate dihydrate and oxalic acid dihydrate precursors and ethyl alcohol solvent.
💡
Conclusion & Impact:Results show that the lowest ZnO nanoparticles size obtained with precursor solution prepared at 0.005M and calcined at 400 °C
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Özet: Çinko oksit (ZnO) nanopartikülleri mükemmel optik · Nanopartiküller · ZnO

Abstract

Zinc oxide (ZnO) nanoparticles can potentially be applied to photo-catalysis, composite materials, chemical, gas, vapor, and humidity sensors and dye-sensitized solar cells due to their excellent optical, electrical, mechanical and chemical properties. The aim of this study was to synthesize ZnO nanoparticles by sol-gel technique and characterize them. ZnO nanoparticles were prepared from zinc acetate dihydrate and oxalic acid dihydrate precursors and ethyl alcohol solvent. The effects of process parameters such as the precursor solution molar concentration, pH and calcination temperatures on the size of the synthesized nanoparticles were investigated. Particle size of synthesized ZnOnanoparticles was determined by using a ZetaSizer instrument. Structural and chemical properties of synthesized ZnO nanoparticles were investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) respectively. Results show that the lowest ZnO nanoparticles size obtained with precursor solution prepared at 0.005M and calcined at 400 °C

Özet

Çinko oksit (ZnO) nanopartikülleri mükemmel optik, elektriksel, mekanik ve kimyasal özelliklerinden dolayı fotokatalize, kompozit malzemelere, kimyasal, gaz, buhar ve nem sensörlerine ve boyaya duyarlı güneş pillerine uygulanabilmektedir. Bu çalışmanın amacı, sol-jel yöntemiyle ZnO nanopartiküllerin sentezlenmesi ve karakterize edilmesidir. ZnO nanopartikülleri çinko asetat dihidrat ve oksalik asit dihidrat başlangıç kimyasalları ve etil alkol çözücüsü kullanılarak hazırlanmıştır. Başlangıç çözeltisi molar konsantrasyonu, pH ve kalsinasyon sıcaklığı gibi işlem parametrelerinin sentezlenen nanopartikül boyutu üzerine etkisi incelenmiştir. ZnO nanopartiküllerinin boyutu ZetaSizer cihazı kullanılarak belirlenmiştir. Sentezlenen ZnO nanopartiküllerinin yapısal ve kimyasal özellikleri X-Işını difraksiyonu (XRD) ve Fourier Dönüşümlü Kızılötesi Spektroskopisi (FTIR) ile belirlenmiştir. Elde edilen sonuçlar en düşük nanopartikül boyutunun başlangıç çözeltisinin 0,005M değerinde hazırlanması ve 400 °C sıcaklıkta kalsinasyon işlemine tabi tutulması sonucunda elde edildiğini göstermiştir.

🔖

Cite This Article

AZEM, N. F. A., BİRLİK, İ. (2018). OPTIMIZATION OF ZnO NANOPARTICLES PREPARED BY SOL-GEL TECHNIQUE. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 20 - Sayı: 58, 121–127. https://ajindex.com/articles/659171

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Sahoo, T., Kim, M., Baek, J. H., Jeon, S. R., Kim, J. S., Yu, Y. T., Lee, C. R., Lee, I. H. 2011. Synthesis and characterization of porous ZnO nanoparticles by hydrothermal treatment of a pure aqueous precursor, Bulletin, Cilt. 46, s. 525–530. DOI: 1016/j.materresbull.2011.01.00 Research Hong, R., Pan, T., Qian, J., Li, H. Synthesis and surface modification of ZnO nanoparticles, Chemical Engineering Journal, Cilt., 1016/j.cej.2006.03.003 Wang, Z. L. 2004.
  2. Nanostructures of zinc oxide, Materials Today, s. 33. (04)00286-X Tan, D., Zhou S., Qiu, J., Khusro, N. Preparation of functional nanomaterials with femto second laser ablation in solution, Journal of Photobiology C: Photochemistry Reviews, Cilt. 17, s. 50-68. DOI: 1016/j.jphotochemrev.2013.08. and Dong, X., Yang, P., Shi, R. 2014. Fabrication of ZnO nanorod arrays via hydrothermal method, Materials Letters, Cilt. 135, s. 96-98. DOI: 1016/j.matlet.2014.07.102 Chen, Y., Shen, Y., Wang, S., Huang, J. 2014. Fabrication of one- dimensional ZnO nanotube and nanowire arrays with an anodic alumina electrochemical deposition, Thin Solid Films, Cilt. 570, s. 303-309. DOI: 10.1016/j.tsf.2014.03.014 Vafaee, M., Ghamsari, M. S. 2007. Preparation and characterization of ZnO nanoparticles by a novel sol–gel route, Materials Letters, Cilt. 61, s. 3265–3268. DOI: 1016/j.matlet.2006.11.089 Wang, G. Z., Wang, Y., Yau, M.Y., To, C.Y., Deng, C.J., Dickon H.L. 2005. Synthesis of ZnO hexagonal columnar pins by chemical vapor deposition, Materials Letters, Cilt., 1016/j.matlet.2005.07.023 DOI: Khalil, M. I., Al-Qunaibit, M. M., Al- zahem, A. M., Labis, J. P. 2014. Synthesis and characterization of ZnO nanoparticles by thermal decomposition of a curcumin zinc complex, Arabian Journal of Chemistry, Cilt 7, s. 1178–1184. DOI: 10.1016/j.arabjc.2013.10.025 Anandan, S., Muthukumaran, S., Ashokkumar, M. 2014. Structural and optical properties of Y, Cu Co- doped ZnO nanoparticles by sol– gel method, Superlattices and Microstructures, Cilt. 74, s. 247– 1016/j.spmi.2014.07.008 DOI: Reda, S. M. 2010. Synthesis of ZnO and Fe2O3 nanoparticles by sol–gel method and their application in dye-sensitized solar cells, Materials Science Processing, Cilt. 13, s. 417–425. DOI: doi:10.1016/j.mssp.2011.09.007 Yasakau, K. A., Carneiro, J., Zheludkevich, M. L., Ferreira, M. G. S. 2014. Influence of sol-gel process parameters on the protection properties of sol–gel coatings applied on AA2024, Surface & Coatings Technology, Cilt. 246, s. 6– 1016/j.surfc