SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2018 / Cilt: 20 - Sayı: 59

INFLUENCE OF BATH COMPOSITION ON THE STRUCTURE AND PROPERTIES OF NICKEL COATINGS PRODUCED BY ELECTRODEPOSITION TECHNIQUE

BANYO KOMPOZİSYONUNUN ELEKTROÇÖKTÜRME YÖNTEMİ İLE ÜRETİLEN NİKEL KAPLAMALARIN YAPISI VE ÖZELLİKLERİNE ETKİSİ

Işıl BİRLİK
N. Funda Ak AZEM
Pages
689–697
Publication Date
2018-05-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that coatings prepared with 0.17M nickel chloride concentration in Watts bath present the better corrosion resistance and mechanical property.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Electrodeposited nickel coatings are extensively used in engineering applications due to their excellent corrosion and wear resistance and easy mechanical operation.
📊
Key Findings & Data:It was found that coatings prepared with 0.17M nickel chloride concentration in Watts bath present the better corrosion resistance and mechanical property.
💡
Conclusion & Impact:Banyo Kompozisyonunun Elektroçöktürme Yöntemi ile Üretilen Nikel Kaplamaların Yapısı ve Özelliklerine Etkisi
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Nikel kaplama · Watts banyosu · Elektroçöktürme

Abstract

Electrodeposited nickel coatings are extensively used in engineering applications due to their excellent corrosion and wear resistance and easy mechanical operation. The structural characteristics, corrosion and mechanical properties of nickel coatings are related to the deposition parameters; such as bath component, composition, current density, pH, deposition time and additives. Electrodeposition technique is one of the most technologically feasible and economical techniques for producing metallic coatings. Watts bath is the most commonly applied nickel electrodeposition bath. Aim of this study is to optimize Watts bath composition by changing nickel chloride concentration and to investigate structural, morphological, corrosion and mechanical properties of produced coatings. It was found that coatings prepared with 0.17M nickel chloride concentration in Watts bath present the better corrosion resistance and mechanical property. Banyo Kompozisyonunun Elektroçöktürme Yöntemi ile Üretilen Nikel Kaplamaların Yapısı ve Özelliklerine Etkisi

Özet

Elektroçöktürülmüş nikel kaplamalar mükemmel korozyon ve aşınma dayanımları ve mekanik olarak kolay işlenebilirlikleri sebebi ile mühendislik uygulamalarında yaygın olarak kullanılmaktadır. Nikel kaplamaların yapısal karakteristikleri, korozyon kompozisyonları, akım yoğunluğu, pH, kaplama süresi ve katkılar gibi kaplama parametrelerine bağlıdır. Elektroçöktürme tekniği metalik kaplamaların üretiminde kullanılan teknolojik olarak en uygulanabilir ve ekonomik yöntemlerden birisidir. Watts banyosu nikelin elektroçöktürülmesinde en yaygın olarak kullanılan banyodur. Bu çalışmanın amacı nikel klorür konsantrasyonunun değiştirilmesi ile Watts banyo kompozisyonunu optimize edilmesi ve üretilen kaplamaların yapısal, morfolojik, korozyon ve mekanik özelliklerinin konsantrasyonuna sahip Watts banyosu ile hazırlanmış olan kaplamaların daha iyi korozyon direncine ve mekanik özelliğe sahip olduğu bulunmuştur

🔖

Cite This Article

BİRLİK, I., AZEM, N. F. A. (2018). INFLUENCE OF BATH COMPOSITION ON THE STRUCTURE AND PROPERTIES OF NICKEL COATINGS PRODUCED BY ELECTRODEPOSITION TECHNIQUE. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 20 - Sayı: 59, 689–697. https://ajindex.com/articles/659160

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Sajjadnejad, M., Omidvar, H., Javanbakht, M., Mozafari, A. 2015. Characterization of Pure Nickel Coatings Fabricated under Pulse Current Conditions, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, Vol:9, No:8, 1061-1065. DOI: scholar.waset.org/1999.2/100028 46 [2] El-Sherik, A.M., Erb, U. 1995. Synthesis of bulk nanocrystalline nickel by pulsed Electrodeposition, Journal of Materials Science, 30, 5743-5749. DOI: 10.1007/BF00356715 [3] Chaoqun, L., Xinhai, L., Zhixing, W., Huajun, G. 2015. Mechanism of Nanocrystalline Nickel Electrodeposition from Novel Citrate Bath, Rare Metal Materials and Engineering, 44(7), 1561- 1567. [4] Kilinc, Y., Unal, U., Alaca, B. E. 2015. Residual stress gradients in electroplated nickel thin films, Microelectronic Engineering, 134, 60-67. DOI: 10.1016/j.mee.2015.01.042 [5] Rudnik, E., Wojnicki, M., Wloch, G. 2012. Effect of gluconate addition on the electrodeposition of nickel from acidic baths, Surface & Coatings Technology, 207, 375- 388. DOI: 10.1016/j.surfcoat.2012.07.027 [6] Sadiku-Agboola, O., Sadiku, E.R., Ojo, O.I., Akanji, O.L., Biotidara, O.F. 2011. Influence of Operation Parameters on Metal Deposition in Bright Nickel-plating Process, Portugaliae Electrochimica Acta, 29(2), 91-100. DOI: 10.4152/pea.201102091 [7] Boukhouiete, A., Creus J. 2015. Nickel deposits obtained by continuous and pulsed electrodeposition processes, J. Mater. Environ. Sci.6 (7)1840- 1844. [8] Karayannis, H. S., Patermarakis, G. 1995. Effect of the Cl- and SO4 -2 ions on the Selective orientation and structure of Ni electrodeposits, Electro chemica Acta, 40, 1079- 1092. [9] Wang, Y., Yang, C., He, J., Wang, W. Mitsuzak, N. Chen, Z. 2016. Effects of choline chloride on electrodeposited Ni coating from aWatts-type bath, Applied Surface Science, 372, 1-6. DOI: 10.1016/j.apsusc.2016.01.182 [10] Gomez, E., Pollina, R., Valles, E. 1995. Nickel electrodeposition on different metallic substrates, Journal of Electroanalytical Chemistry, 386, 45 -56. [11] Orinakova, R., Streckova, M., Trnkova, Rozik, L. R., Galova, M. 2006. Comparison of chloride and sulphate electrolytes in nickel electrodeposition on a paraffin impregnated graphite electrode Journal of Electroanalytical Chemistry 594, 152-159. DOI: 10.1016/j.jelechem.2006.05.031 [12] Dennis, J. K., Such, T. E. 1993. Electroplating baths and anodes used for industrial nickel deposition Nickel and Chromium Plating, 3rd. Edition, A volume in Woodhead Publi