SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2021 / Cilt: 26 - Sayı: 3

Investigation of The Mechanical Properties of Tensile Test Samples Produced in Different Colors and Different Infill Patterns with A 3D Printer

3 BOYUTLU YAZICI İLE FARKLI RENKLERDE VE FARKLI DOLGU DESENLERİNDE ÜRETİLEN ÇEKME TEST NUMUNELERİNİN MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

Ahmet KAYA
Şemsettin TEMİZ
Muhammed Safa KAMER
Dr. Hakan YAYKAŞLI
Pages
829–848
Publication Date
2022-11-06
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Among the infill patterns used, it has been determined that the highest tensile strength values are in the samples produced with the "Concentric" infill pattern.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Fused deposition modeling (FDM) is a rapidly growing rapid prototyping technology due to its ability to create functional parts with complex shapes in a reasonable time.
📊
Key Findings & Data:Determining and improving the mechanical properties of the products produced by 3D printers using the FDM method is of great importance for the widespread use of this manufacturing method.
💡
Conclusion & Impact:Among the infill patterns used, it has been determined that the highest tensile strength values are in the samples produced with the "Concentric" infill pattern.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Eklemeli İmalat · Erimiş Yığma Modellemesi · 3B Yazıcı

Abstract

Fused deposition modeling (FDM) is a rapidly growing rapid prototyping technology due to its ability to create functional parts with complex shapes in a reasonable time. Determining and improving the mechanical properties of the products produced by 3D printers using the FDM method is of great importance for the widespread use of this manufacturing method. In this study; tensile test specimens have been produced in different colors and different infill patterns using ABS and PLA materials with the Ultimaker 2 Extended 3D printer. The effects of filament color and infill pattern on mechanical properties have been investigated experimentally. As a result, it has been determined that the filament color used has no significant effect on the mechanical properties of the tensile samples produced by 3D printer. Among the infill patterns used, it has been determined that the highest tensile strength values are in the samples produced with the "Concentric" infill pattern.

Özet

Erimiş yığma modellemesi (FDM), makul bir süre içinde karmaşık şekillere sahip işlevsel parçalar oluşturma yeteneği nedeniyle hızla büyüyen bir hızlı prototipleme teknolojisidir. FDM yöntemiyle üretim yapan 3 boyutlu yazıcılarla üretilen ürünlerin mekanik özelliklerinin belirlenmesi ve geliştirilmesi, bu imalat yönteminin kullanımının yaygınlaşması açısından büyük öneme sahiptir. Bu çalışmada; Ultimaker 2 Extended 3B yazıcı ile ABS ve PLA malzeme kullanılarak farklı renklerde ve farklı dolgu desenlerinde çekme test numuneleri üretilmiştir. Filament renginin ve dolgu deseninin mekanik özellikler üzerindeki etkileri deneysel olarak araştırılmıştır. Sonuç olarak, kullanılan filament renginin, 3 boyutlu yazıcı ile üretilen çekme numunelerinin mekanik özellikleri üzerinde kayda değer bir etkisinin olmadığı tespit edilmiştir. Kullanılan dolgu desenleri arasından en yüksek çekme mukavemeti değerlerinin “Concentric” dolgu deseniyle üretilen numunelerde olduğu belirlenmiştir.

🔖

Cite This Article

KAYA, A., TEMİZ, Ş., KAMER, M. S., YAYKAŞLI, D. H. (2022). Investigation of The Mechanical Properties of Tensile Test Samples Produced in Different Colors and Different Infill Patterns with A 3D Printer. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 26 - Sayı: 3, 829–848. https://ajindex.com/articles/643732

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Al-Maharma, A.Y., Patil, S.P. ve Markert, B. (2020) Effects of porosity on the mechanical properties of additively manufactured components: a critical review, Materials Research Express, 7(12), 2001.
  2. Andó, M., Birosz, M. ve Jeganmohan, S. (2021) Surface bonding of additive manufactured parts from multi-colored PLA materials, Measurement, 169, 1-7.
  3. ASTM D638-14, (2014). Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA.
  4. Ayrılmış, N. (2018) Effect of layer thickness on surface properties of 3D printed materials produced from wood flour/PLA filament, Polymer Testing, 71, 163-166.
  5. Chacón, J.M., Caminero, M.A., García-Plaza, E. ve Núñez, P.J. (2017) Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection, Materials & Design, 124, 143-157.
  6. Dilberoğlu, U.M., Şimşek, S. ve Yaman, U. (2019) Shrinkage compensation approach proposed for ABS material in FDM process, Materials and Manufacturing Processes, 34(9), 993-998.
  7. Graziosi, S., Cannazza, F., Vedani, M., Ratti, A., Tamburrino, F. ve Bordegoni, M. (2020) Design and testing of an innovative 3D-printed metal-composite junction, Additive Manufacturing, 36, 1-18.
  8. Gulcımen Cakan, B., Ensarioglu, C., Küçükakarsu, V., Tekin, İ. ve Çakır, M. (2021) FDM yöntemiyle üretilmiş öksetik bal peteği kutuların yöne bağlı darbe davranışının deneysel ve nümerik olarak incelenmesi, Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 36(3), 1657-1668.
  9. Kumar, R., Singh, R. ve Ahuja, I.P.S. (2019) Friction stir welding of ABS-15Al sheets by introducing compatible semi-consumable shoulder-less pin of PA6-50Al, Measurement, 131, 461-472.
  10. Lay, M., Thajudin, N.L.N., Hamid, Z.A.A., Rusli, A., Abdullah, M.K. ve Shuib, R.K. (2019) Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding, Composites Part B, 176, 107341.
  11. Liao, Y., Liu