Journals / Tekstil ve Konfeksiyon / 2016 / Cilt: 26 - Sayı: 1

İPLİK KATLAMA MAKİNESİNİN BİR HAVA DÜZESİ İLE MODİFİYE EDİLMESİ ÜZERİNE BİR ÇALIŞMA

A STUDY FOR THE MODIFICATION OF A YARN TWISTING MACHINE WITH AN AIR NOZZLE

Pages
64–75
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results indicated that presented method may open a new avenue to achieve an extra reduction in yarn hairiness and also an increase in productivity during the plying process.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Single yarns are plied to improve some of the yarn and fabric properties such as hairiness, strength, elongation, evenness and abrasion resistance.
📊
Key Findings & Data:The results indicated that presented method may open a new avenue to achieve an extra reduction in yarn hairiness and also an increase in productivity during the plying process.
💡
Conclusion & Impact:Therefore, modified method can be considered as an innovative plying process regarding with the improvement in yarn hairiness
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Single yarns are plied to improve some of the yarn and fabric properties such as hairiness, strength, elongation, evenness and abrasion resistance. Present work proposed a new method for the reduction of the plied yarn hairiness. The modified plying method employs an air nozzle and compressed air on a classical twisting machine. The air was fed into an air nozzle and single yarns were passed into the air nozzle. In the work, single yarns having S- and Z-twist direction were plied with classical and modified plying methods at different ply twist levels and airflow properties. The results indicated that presented method may open a new avenue to achieve an extra reduction in yarn hairiness and also an increase in productivity during the plying process. In literature, there were not any trials to incorporate the air nozzle and plying process in this manner. Therefore, modified method can be considered as an innovative plying process regarding with the improvement in yarn hairiness

Özet

Tek katlı iplikler, tüylülük, mukavemet, kopma uzaması, aşınma direnci gibi bazı iplik ve kumaş özelliklerini iyileştirmek için katlanmaktadır. Bu çalışmada, katlı ipliklerin iplik tüylülüğünü azaltmak için yeni bir metot önerilmektedir. Modifiye katlama metodu, klasik büküm makinesinde bir hava düzesi ve basınçlı havanın kullanılmasından oluşmaktadır. Basınçlı hava bir hava düzesine verilmekte ve tek katlı iplikler düze içerisinden geçirilmektedir. Çalışmada, S- ve Z- bükümlü tek katlı iplikler farklı katlama büküm değerlerinde ve basınçlı hava özelliklerinde klasik ve modifiye katlama metodu ile katlanmışlardır. Elde edilen sonuçlar, sunulan metodun katlama prosesi sırasında iplik tüylülüğünde ekstra bir iyileşme elde edilmesi ve aynı zamanda verimlilikte artış sağlanması konularında yeni bir kapı açacağını göstermiştir. Literatürde, hava düzesi ile katlama prosesinin bu tarzda birleştirilmesine yönelik herhangi bir deneme bulunmamaktadır. Bu nedenle, modifiye katlama metodu iplik tüylülüğündeki iyileşme açısından yenilikçi bir katlama prosesi olarak değerlendirilebilir

🔖

Cite This Article

YILMAZ, D., YURTASLAN, Ö. (2022). İPLİK KATLAMA MAKİNESİNİN BİR HAVA DÜZESİ İLE MODİFİYE EDİLMESİ ÜZERİNE BİR ÇALIŞMA. Tekstil ve Konfeksiyon, Cilt: 26 - Sayı: 1, 64–75. https://ajindex.com/articles/596704

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Chattopadhyay, R., 1997, “The Influence of Plying on the Tenacity, Breaking Extension, and Flexural Rigidity of Air-jet-spun Yarn”, The Journal of The Textile Institute, Vol. 88:1, pp. 76-78
  2. Tyagi, G.K., Dhamija, S., 2000, “Quality aspects of viscose jet-spun plied yarns”, Indian Journal of Fibre&Textile Research, Vol. 25, December, pp. 284- 288
  3. Lawrence, C.A., 2003, Fundamentals Of Spun Yarn Technology, CRC Pres LLC, ISBN 1-56676- 821-7, USA
  4. Rosiak, d., Przybyl, K., 2004, “Twisting Of Multi-Folded Yarns And Threads Manufactured By Means Of New Spinning Technologies”, AUTEX Research Journal, Vol. 4, No 3, September, pp. 113-117
  5. Palaniswamy, N.K., Mohamed, 2005a, “Effect of Single Yarn Twist and Ply to Single Yarn Twist Ratio on Strength and Elongation of Ply Yarns”, Journal of Applied Polymer Science, Vol. 98, pp. 2245–2252
  6. Palaniswamy, K., Mohamed, P., 2006, “Effect of the Single-Yarn Twist and Ply to Single-Yarn Twist Ratio on the Hairiness and Abrasion Resistance of Cotton Two-Ply Yarn”, AUTEX Research Journal, Vol. 6, No (2), June, pp 59-71
  7. Yılmaz, D., Özkan, H.H., Kimya, C., 2008, “Kısa Ştapel İplikçilikte Siro İplik Özelliklerinin İncelenmesi”, Electronic Journal of Textile Technologies, Vol. 2008 (2), pp. 1 -16
  8. Ishtiaque, S.M., Subramani, P., Kumar, A., Das, B.R., 2009, “Structural and tensile properties of ring and compact plied yarns”, Indian Journal of Fibre&Textile Research, Vol. 34, pp. 213-218
  9. Yılmaz, D., Ibrahim, S., 2010, “Analysis of Yarn Properties of Sirospun, Plied and Single Ring Spun Yarns”, 2010 Beltwide Cotton Conference, 04-08 January, Beltwide, USA
  10. Kotb, N. A., 2012, “Predicting Yarn Quality Performance Based on Fibers types and Yarn Structure”, Life Science Journal, Vol. 9(3), pp. 1009-1015
  11. Ömeroğlu, S., 2013, “An Investigation On The Effects Of Ply And Single Twists On Strength, Hairiness And Abrasion Resistance Properties Of Two-Ply Cotton Ring-Spun Yarns”, Journal of Tekstil ve Konfeksiyon, Vol. 23 (2), pp. 204-212
  12. Bennett, J.M., Postle, R., 1979, “The Torque Generated in Single and Multi-Ply Yarns as a Function of Changes in Yarn Tension”, Textile Research Journal, Vol. 49(9), pp. 499-506
  13. Palaniswamy, N.K., Mohamed, 2005b, “Effect of Single Yarn Twist, Ply-to-Singles Twist Ratio and tightness factor on spirality of single jersey cotton knitted fabrics”, Indian Journal of Fibre&Textile Research, Vol. 30, pp. 258-262
  14. Fraser, W.B., Stump, D.M., 1998a, “The Equilibrium Of