Journals / Teknik Dergi / 2006 / Cilt: 17 - Sayı: 1

Velocity and discharge measurements in open channel flow

Açık kanal akımı hız-debi ölçümleri

Pages
3805–3808
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Among these methods, the best result is obtained for discharge calculation using the measured velocities in each segment at the depth of 0.2 and 0.8 from the water surfaces.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The precision in the velocity and discharge measurements taken in the open channel flow are important for using the limited water resources in a correct and suitable manner.
📊
Key Findings & Data:Therefore, the number of measurements and the method for the cross section the measurements will be taken are need to be determined correctly.
💡
Conclusion & Impact:Among these methods, the best result is obtained for discharge calculation using the measured velocities in each segment at the depth of 0.2 and 0.8 from the water surfaces.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The precision in the velocity and discharge measurements taken in the open channel flow are important for using the limited water resources in a correct and suitable manner. Therefore, the number of measurements and the method for the cross section the measurements will be taken are need to be determined correctly. In this study, the symmetry control is made for the rectangular prismatic channel cross section. Six different methods used in the measurements of velocity and discharge in open channel flow were considered and the precision of each method was compared. Among these methods, the best result is obtained for discharge calculation using the measured velocities in each segment at the depth of 0.2 and 0.8 from the water surfaces.

Özet

Açık kanal akımlarında yapılan hız ve debi ölçümlerindeki hassasiyet, kısıtlı olan su kaynaklarının doğru ve amacına uygun olarak kullanılması bakımından önemlidir. Bu nedenle ölçüm yapılacak olan kesitlerdeki ölçüm şekli ve sayısının doğru olarak belirlenmesi gerekir. Ele alınan çalışmada dikdörtgen prizmatik kanalda enkesit üzerinde simetri kontrolü yapılmîştır. Açık kanal akımlarında hız, debi ölçümünde kullanılan 6 farklı yöntem ele alınarak bu yöntemler arasında hassasiyet karşılaştırılmıştır. Bu yöntemler arasında, debi hesabı için en iyi yöntemin, ele alınan her bir dilim için su yüzeyinden 0.2 ve 0.8 derinliklerde ölçülen değerlerle bulunabileceği belirlenmiştir.

🔖

Cite This Article

ARDIÇLIOĞLU, M. (2022). Velocity and discharge measurements in open channel flow. Teknik Dergi, Cilt: 17 - Sayı: 1, 3805–3808. https://ajindex.com/articles/596622

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Chow, V. T., Open channel hydraulics. McGraw-Hill Book Co., New York 1959
  2. U.S. Department of the Interior Bureau of Reclamation, Water Measurement Manual. Water Resources Technical Publication, Third edition, 1984
  3. Thorn, R., Melling A., Kochner* H., Haak, R. Husain, Z. D., Flow Measurements, 1999, _____http://www.engnetbase.com>.