Journals / Teknik Dergi / 2013 / Cilt: 24 - Sayı: 4

Investigation of factors affecting discharge capacity of prefabricated vertical drains

Pages
6529–6557
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Clogging of the core zone, shapes of deformation, structure of PVD, and resistance against buckling have varying effects on the discharge capacity of PVDs depending on the soil type.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An important factor affecting the performance of PVDs is their discharge capacity.
📊
Key Findings & Data:The discharge capacity of PVDs, which is large at low deformations, decreases significantly (up to 57%) within the range of hydraulic gradients applied in this study (0.10 to 1.00).
💡
Conclusion & Impact:Clogging of the core zone, shapes of deformation, structure of PVD, and resistance against buckling have varying effects on the discharge capacity of PVDs depending on the soil type.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

An important factor affecting the performance of PVDs is their discharge capacity. The effect of factors such as, the hydraulic gradient, lateral stresses on a PVD, the type of soil in which PVDs are placed, the structure of PVDs and their flexural stiffness were investigated. Four different types of PVDs were used to investigate the effects of PVD deformation during the consolidation of soil and clogging of the core area on the discharge capacity of PVDs. The discharge capacity of PVDs, which is large at low deformations, decreases significantly (up to 57%) within the range of hydraulic gradients applied in this study (0.10 to 1.00). At large deformations, PVDs have a lower discharge capacity although the change in hydraulic gradient has a negligible effect on them. On the other hand, experimental observations have shown that the deformations occurring during consolidation of soils have an important effect on the discharge capacity of PVDs. For the type of PVDs used, the discharge capacity decreases by 68% to 100% when PVDs deform by 41.5%. Furthermore, a 40% decrease in discharge capacity is observed when lateral stress is increased from 25 kPa to 200 kPa. Clogging of the core zone, shapes of deformation, structure of PVD, and resistance against buckling have varying effects on the discharge capacity of PVDs depending on the soil type.

🔖

Cite This Article

EDİL, T., ÖZAYDIN, K., ŞENGÜL, T. (2022). Investigation of factors affecting discharge capacity of prefabricated vertical drains. Teknik Dergi, Cilt: 24 - Sayı: 4, 6529–6557. https://ajindex.com/articles/596594

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. ASTM D4716, Standard test method for determining the (in-plane) flow rate per unit width and hydraulic transmissivity of a geosynthetic using a constant head, Annual Book of ASTM Standards, 1995
  2. Chu, J., Bo, M.W. ve Choa, V., Practical Considerations for Using Vertical Drains in Soil Improvement Projects, Geotextiles and Geomembranes, 22: 101-117, 2004
  3. Hansbo, S., How to Evaluate the Properties of Prefabricated Drains, Proceedings of the Eighth European Conference on Soil Mechanics and Foundation Engineering: Improvement of Ground. Vol.2, Soil Reinforcement, Speeding Up of Consolidation, Improvement of Special Soils, Soil Improvement Under Water and Soil Stabilization., Helsinki, 6(13): 621-626, 1983
  4. Kamon, M., Pradhan, B.S., Suwa, S., Laboratory Evaluation of The Prefabricated Bands-Shaped Drains, Soil Improvement, Current Japanese Materials Research. Vol.9, Cambridge University Press, Cambridge, UK, 1984
  5. Guido, V.A., Ludewig, N.M., A Comparative Laboratory Evaluation of Band-Shaped Prefabricated Drains, In. Yong, R.N., Townsend, F.C. (Eds.), Consolidation of Soils: Testing and Evaluation, ASTM STP 892, 642-662, 1986
  6. Suits, L.D., Gemme, R.L., Masi, J.J., Effectiveness of Prefabricated Drains on Laboratory Consolidation of Remolded Soils, In. Yong, R.N., Townsend, F.C. (Eds.), Consolidation of Soils: Testing and Evaluation, ASTM STP 892, 663-683, 1986
  7. Bergado, D.T., Manivannan, R. ve Balasubramaniam, A.S., Proposed Criteria for Discharge Capacity of Prefabricated Vertical Drains, Geotextile and Geomembranes, 14: 481-505, 1996
  8. Lee, C.H., Kang, S.T., Discharge Capacity of Prefabricated Vertical Band Drains, Final Year Report, Nanyang Technological University, Singapore, 1996
  9. Sasaki, S., Report of Experimental Test for the Prefabricated Drain Geodrain, Tokyo Construction Co., Tokyo, 1981
  10. Miura, N., Chai, J.C. ve Toyota, K., Investigation on Some Factors Affecting Discharge Capacity of Prefabricated Vertical Drain, Proceedings of the 6th International Conference on Geosynthetics, IFAI, Atlanta, Georgia, 2: 845-850. 1998
  11. Kremer, R., De Jager, W., Maagdenberg, A., Meyvogel, I. ve Oostveen, J., Quality Standards for Vertical Drains, Proceedings 2nd International Conference on Geotextiles, Las Vegas, 2: 319-324, 1982
  12. Kremer, R., Discussion to Specialty Session 6, Proceedings of the 8th European Conference on Soil Mechanics and Foundation Engineering, Helsinki, 3: 1235-1237, 1983
  13. Ali, F.H., The Flo