Journals / Research on Engineering Structures and Materials / 2022 / Cilt: 8 - Sayı: 1

Recent developments in vibrothermography

Pages
57–73
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It covers basics, history, equipments used, types, materials, probability of detection, principle of heat generation mechanism and factors that affect detectability in vibrothermography.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Due to the sensitivity of fluorescent penetrant inspection to surface roughness of the inspected material, researchers have been investigating alternative inspection methods.
📊
Key Findings & Data:Vibrothermography is one of the contactless nondestructive testing methods in which vibration pulses with high frequencies (typically 20-40 kHz) are used in a part for a short period of time to produce thermal gradient at the defect.
💡
Conclusion & Impact:It covers basics, history, equipments used, types, materials, probability of detection, principle of heat generation mechanism and factors that affect detectability in vibrothermography.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Due to the sensitivity of fluorescent penetrant inspection to surface roughness of the inspected material, researchers have been investigating alternative inspection methods. Vibrothermography is one of the contactless nondestructive testing methods in which vibration pulses with high frequencies (typically 20-40 kHz) are used in a part for a short period of time to produce thermal gradient at the defect. In this technique, thermographic or infra-red cameras are used for radiation detection due to thermal gradient in the range of 0.9-14 µm electromagnetic spectrum. This paper focuses on the recent developments in vibrothermography. It covers basics, history, equipments used, types, materials, probability of detection, principle of heat generation mechanism and factors that affect detectability in vibrothermography.

🔖

Cite This Article

GÜLCAN, O. (2022). Recent developments in vibrothermography. Research on Engineering Structures and Materials, Cilt: 8 - Sayı: 1, 57–73. https://ajindex.com/articles/588826

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Lu QY, Wong CH. Applications of non-destructive testing techniques for post process control of additively manufactured parts. Virtual and Physical Prototyping, 2017; 12: 301-321.
  2. Montinaro N, Cerniglia D, Pitarresi G. Defect detection in additively manufactured titanium prothesis by flying laser scanning thermography. Procedia Structural Integrity, 2018; 12: 165-172.
  3. Ibarra-Castanedo C, Maldague X. Pulsed phase thermography reviewed. Quantitative InfraRed Thermography Journal, 2004; 1 (1): 47-70.
  4. Moylan S, Whitenton E, Lane B, Slotwinski J. Infrared thermography for laser-based powder bed fusion additive manufacturing processes. AIP Conference Proceedings, 2014; 1581: 1191-1196.
  5. Carvalho MS, Martins AP, Santos TG. Simulation and validation of thermography inspection for components produced by additive manufacturing. Applied Thermal Engineering, 2019; 159: 113872.
  6. Ciampa F, Mahmoodi P, Pinto F, Meo M. Recent advances in active infrared thermography for non-destructive testing of aerospace components. Sensors, 2018; 18: 609.
  7. Raplee JB. (2017). Monitoring the metal additive manufacturing process through thermographic data analysis. Master's Dissertation, University of Tennessee, USA
  8. Akhloufi MA, Guyon Y, Castanedo C-I, Bendada A. Three-dimensional thermography for nondestructive testing and evaluation. Quantitative InfraRed Thermography Journal, 2016; 14 (1): 79-106.
  9. Vavilov V. Thermal NDT: historical milestones, state-of-the-art and trends. Quantitative InfraRed Thermography Journal, 2014; 11 (1): 66-83.
  10. Meola C, Boccardi S, Carlomagno GM. Infrared thermography in the evaluation of aerospace composite materials, Woodhead Publishing, Sawston, United Kingdom, 2015
  11. Khodayar F, Sojasi S, Maldague X. Infrared thermography and NDT: 2050 horizon. Quantitative InfraRed Thermography Journal, 2016; 13 (2): 210-231.
  12. Mendioroz A, Celorrio R, Salazar A. Ultrasound excited thermography: an efficient tool for the characterization of vertical cracks. Measurement Science and Technology, 2017; 28 (11): 112001. https://doi.org/10.1088/1361-6501/a