Journals / Metalurji / 1999 / Cilt: 23 - Sayı: 120

A method for determining plain-strain yield surfaces

Düzlem zorlanmada akma yüzeylerini belirleme metodu

Journal
Metalurji
Pages
31–34
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The points of the yield surface in the stress space are determined by using lineer programming.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, based on the application of the lower bound limit theorem of the theory of plasticity, a method for determining the plane-strain yield surfaces is presented.
📊
Key Findings & Data:This method considers face centered cubic crystal as a new method.
💡
Conclusion & Impact:The points of the yield surface in the stress space are determined by using lineer programming.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, based on the application of the lower bound limit theorem of the theory of plasticity, a method for determining the plane-strain yield surfaces is presented. This method considers face centered cubic crystal as a new method. The points of the yield surface in the stress space are determined by using lineer programming.

Özet

Bu çalışmada, plastisite teorisinin düşük sınır limiti savının uygulanması temel alınarak, düzlem zorlanmada akma yüzeyinin belirlenmesine çalışılmıştır. Bu yöntem yeni bir metod olup, yüzey merkezli kübik kristal yapı gözönünde bulundurulmuştur. Yöntemin uygulanmasında doğrusal programlama ile gerilme uzayı içindeki akma yüzeyi noktaları belirlenmiştir.

🔖

Cite This Article

ÖZBAY, M. (2022). A method for determining plain-strain yield surfaces. Metalurji, Cilt: 23 - Sayı: 120, 31–34. https://ajindex.com/articles/580385