Journals / Metalurji / 1999 / Cilt: 23 - Sayı: 120

Production methods and mechanical properties of closed-cell aluminum foams

Kapalı hücreli alüminyum köpük metallerin üretim metodları ve mekanik özellikleri

Journal
Metalurji
Pages
35–42
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that increasing metal foam density increased compression strength while it decreased energy absorption capacities of metal foams.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Closed-cell aluminum foam's production methods, microstructure, mechanical properties and application areas were summarized.
📊
Key Findings & Data:It was found that increasing metal foam density increased compression strength while it decreased energy absorption capacities of metal foams.
💡
Conclusion & Impact:Foam cell's walls were observed to be covered by a thin oxide layer.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Closed-cell aluminum foam's production methods, microstructure, mechanical properties and application areas were summarized. One of the important mechanical properties of these materials is their high energy absorption capabilities under compression. Compression tests were applied to aluminum metal foams of different densities produced by Fraunhofer Research Center. It was found that increasing metal foam density increased compression strength while it decreased energy absorption capacities of metal foams. Foam cell's walls were observed to be covered by a thin oxide layer.

Özet

Kapalı hücreli alüminyum köpük metallerin üretim metodları, mikroyapısı, mekanik özellikleri ve uygulama alanları özetlenmiştir. Bu malzemelerin en önemli mekanik özelliklerinden birisi basma altında yüksek miktarda enerji emme kapasiteleridir. Fraunhofer Research Center tarafından toz metalürjisi ile üretilen değişik yoğunluktaki alüminyum köpük metallerine basma testleri yapılmıştır. Basma gerilmesi yoğunluğun artmasıyla yükselmiştir. Fakat enerji emme kapasiteleri yoğunluğun artması ile azalmıştır. Köpük metal hücre duvarlarının oksit tabakası ile kaplı olduğu gözlenmiştir.

🔖

Cite This Article

YILMAZ, S., ELBİR, S., GÜDEN, M. (2022). Production methods and mechanical properties of closed-cell aluminum foams. Metalurji, Cilt: 23 - Sayı: 120, 35–42. https://ajindex.com/articles/580376