Journals / İstanbul Yerbilimleri Dergisi / 2010 / Cilt: 23 - Sayı: 1

Effects of rock mass properties on rock slope designs (Kahramanmaraş-Gaziantep motorway)

Kaya kütle özelliklerinin şev tasarımına etkisi (Kahramanmaraş-Gaziantep Devlet yolu)

Pages
1–8
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study showed that, economical and safe slopes, different from the applied slope angles for the TAG Highway, could be designed without having additional protection (such as wire mesh, shotcrete, rock bolt).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:İn this study, a new approach has been developed to evaluate effects of diferent lithological and structural properties on the slope design and applied to an area which contains dolomite and clayey limestone deposits in the Gaziantep region.
📊
Key Findings & Data:The importance of this region is increased with newly planned Gaziantep-Kahramanmaraş Highway around Tarsus-Adana-Gaziantep (TAG) Highway.
💡
Conclusion & Impact:This study showed that, economical and safe slopes, different from the applied slope angles for the TAG Highway, could be designed without having additional protection (such as wire mesh, shotcrete, rock bolt).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

İn this study, a new approach has been developed to evaluate effects of diferent lithological and structural properties on the slope design and applied to an area which contains dolomite and clayey limestone deposits in the Gaziantep region. The importance of this region is increased with newly planned Gaziantep-Kahramanmaraş Highway around Tarsus-Adana-Gaziantep (TAG) Highway. During this study, four different slope have been investigated in both dolomitic and clayey limestone. Primarily, kinematic properties of four different slopes in accordance with rock mass properties and coherence of safe slope angles for selected TAG highway have been evaluated. This study showed that, economical and safe slopes, different from the applied slope angles for the TAG Highway, could be designed without having additional protection (such as wire mesh, shotcrete, rock bolt).

Özet

Bu çalışmada farklı litolojik ve yapısal özelliklerin şev tasarımına etkisi, örnek bir uygulama kapsamında değerlendirilmiştir. Bu amaca yönelik olarak Gaziantep bölgesinde dolomitik ve killi kireçtaşlannın gözlendiği bir alan seçilmiştir. Tarsus-Adana-Gaziantep (TAG) otoyolu gibi önemlidir projenin bulunduğu bu bölgede Gaziantep-Kahramanmaraş arasında yeni bir devlet yolunun açılması planlanmaktadır. Çalışma kapsamında dolomitik ve killi kireçtaşları içerisinde ve her iki yol güzergâhında olmak üzere dört ayrı kazı şevi kinematik olarak değerlendirilmiştir. Otoyol için belirlenen şev açılarından farklı açılarda, ilave önlemler almadan (çelik hasır, püskürtme beton, kaya saplaması), ekonomik ve güvenli şevler oluşturulabileceği ortaya konulmuştur.

🔖

Cite This Article

GÖKOĞLU, A., ÖZVAN, A., DİNÇER, İ., SEVİMLİ, U. İ. (2022). Effects of rock mass properties on rock slope designs (Kahramanmaraş-Gaziantep motorway). İstanbul Yerbilimleri Dergisi, Cilt: 23 - Sayı: 1, 1–8. https://ajindex.com/articles/555700

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. ASTM D 2938-86 2003. Test method for unconfmed compressive strength of intact rock core specimens. Annual book of ASTM standards, 04.08, ASTM, Philadelphia, USA. Barton, N., 1973. Review of a new shear-strength criterion for rock joints, Engineering Geology, 7, pp. 287-332.
  2. Barton, N. And Choubey, V., 1977. The shear strength of joints in theory and pratice,, Rock Mechanics, 10, pp. 1-54.
  3. Goodman, R.E., 1989. Introduction to Rock Mechanics, 2nd ed. Wiley, New York. 562 pp. Hoek, E. and Bray J. W., 1981. Rock Slope Engineering. The Institution of Mining and Metallurgy, Stephen Austin and Sons Ltd., London, 3rd edition, 358 p. Hoek, E. and Brown, E. T., 1997. Practical estimates of rock mass strength. International Journal of Rock Mechanics and Mining Sciences, 34 (8), pp. 1165-1186.
  4. Hoek, E., Marinos, P. and Benissi, M., 1998.Applicability of the geological strength index (GSI) classification for very weak and sheared rock masses: the case of the Athens schist formation. Bulletin of Engineering Geology and Environment, 57, 151-60. ISRM, 1981. Rock characterization, testing and monitoring. In: Brown, E.T. (Ed.), 1981. International Society for Rock Mechanics (ISRM) Suggested Methods. Pergamon, Oxford. 211 pp. ISRM (International Society for Rock Mechanics), 2007. The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974-2006. R. Ulusay and J.A. Hudson (eds.), Ankara. 628pp. Sönmez, H. and Ulusay, R., 1999. Modifications to the geological strength index (GSI) and their applicability to stability of slopes. International Journal of Rock Mechanics and Mining Science, 36 (6), pp. 743-760.