Journals / İstanbul Üniversitesi Orman Fakültesi Dergisi / 1998 / Cilt: 48 - Sayı: 1

The effect of various manufacturing variables on technological properties of particleboards

Çeşitli üretim değişkenlerinin yongalevhanın teknolojik özellikleri üzerine etkisi

Pages
91–116
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Modifiying face/core/face ratios from 15/70/15 to 20/60/20 (weight ratios) and increasing the resin content improved board properties investigated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study.is on the relationship between the board properties and vari¬ous maaiıfact'jH-ihğ factors in particleboards produced in the laboratory.
📊
Key Findings & Data:Increasinş (he paraffin content from 0.5 to 1.0 percent did not influence the internal Bond and bending strength, but reduced the screw holding abili¬ty.
💡
Conclusion & Impact:Modifiying face/core/face ratios from 15/70/15 to 20/60/20 (weight ratios) and increasing the resin content improved board properties investigated.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study.is on the relationship between the board properties and vari¬ous maaiıfact'jH-ihğ factors in particleboards produced in the laboratory. Increasinş (he paraffin content from 0.5 to 1.0 percent did not influence the internal Bond and bending strength, but reduced the screw holding abili¬ty. The properties of the boards containing 7.5 and 6.8 % dust (below 0.3S mm in screeen size) in the faces and core, respectively, were lower than those containing 11.2 and 10.2 % dust. Modifiying face/core/face ratios from 15/70/15 to 20/60/20 (weight ratios) and increasing the resin content improved board properties investigated.

Özet

xBütç^lışmada, yongalevhanın fiziksel ve mekanik özellikleri ile kullanış yeri üzejjne önemli etkileri olan üretim değişkenlerinden; parafin miktarı, normal Boyutlu yongalar içerisindeki toz miktarı, yüzey/orta/yüzey tabakalarındaki yonga oranları, tutkal miktarı ve levha çeşidinin (üç katli ve homojen) eğilme direnci, yüzeye dik çekme direnci ve vida tutma gücü üzer¬ine etkileri araştırılmıştır. Parafin miktarının %0.5'ten %1.0'e çıkmasıyla özellikle vida tutma gücünde bir azalma olmuştur. Toz miktarının yüzey tabaka yongalarında %11.2 ve orta tabakada %10.2 oranında bulunması eğilme direnci ve yüzeye dik çekme direncini artırmıştır. Tutkal miktarının artırılması ve üzey/orta/yüzey tabaka oranının 20/60/20 şeklinde teşkil edilmesi levhanın direnç değerlerini olumlu yönde etkilemiştir. Üç katlı levhalarda eğilme direnci, homojen levhalarda ise yüzeye dik çekme direnci daha yüksek bulunmuştur.

🔖

Cite This Article

AKBULUT, T. (2022). The effect of various manufacturing variables on technological properties of particleboards. İstanbul Üniversitesi Orman Fakültesi Dergisi, Cilt: 48 - Sayı: 1, 91–116. https://ajindex.com/articles/554566

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...