Journals / İstanbul Üniversitesi Orman Fakültesi Dergisi / 2015 / Cilt: 65 - Sayı: 2

Ahşap çimento kompozit tuğlalarında güçlendirici olarak ahşap atıklarının kullanılması

Utilizing wood wastes as reinforcement in wood cement composite bricks

Pages
31–37
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

WCCBs at3.0:1 cement/wood content are suitable for structural application such as panelling, ceiling and partitioning

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper presents the research work undertaken to study the properties of Wood Cement CompositeBricks (WCCB) from different wood wastes and cement / wood content.
📊
Key Findings & Data:The WCBBs with no minal density of 1200 kg m-3were produced from three tropical wood species and at varying cement and wood content of 2:1, 2.5:1and 3:1 on a weight to weight basis.
💡
Conclusion & Impact:WCCBs at3.0:1 cement/wood content are suitable for structural application such as panelling, ceiling and partitioning
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This paper presents the research work undertaken to study the properties of Wood Cement CompositeBricks (WCCB) from different wood wastes and cement / wood content. The WCBBs with no minal density of 1200 kg m-3were produced from three tropical wood species and at varying cement and wood content of 2:1, 2.5:1and 3:1 on a weight to weight basis. The properties evaluated were compressive strength, Ultra Pulse Velocity(UPV), water absorption (WA) and thickness swelling (TS). The Compressive strength values ranged from 0.25 to1.13 N mm-2 and UPV valu es ranged from 18753 to 49992 m s -1. The mean values of WA after 672 hours (28 days)of water soaking of the WCCBs ranged from 9.50% to 47.13% where there were no noticeable change in the TS ofthe bricks. The observed density (OD) ranged from 627 to 1159 kg m-3. A. zygia from the three wood/cement contentwere more dimensionally stable and better in compressive strength than the other two species where T. scleroxylonhad the best performance in terms of UPV. All the properties improved with increasing cement content. WCCBs at3.0:1 cement/wood content are suitable for structural application such as panelling, ceiling and partitioning

Özet

Bu çalışma, farklı ahşap atıklarından ve çimento / ahşap içeriğinden elde edilen Ahşap Çimento KompozitTuğlaların (WCCB) özelliklerini incelemek üzere gerçekleştirilen araştırmayı temsil etmektedir. Üç tropik ağaçtüründen ve ağırlık bazında 2:1, 2,5:1 ve 3:1 olmak üzere değişen çime nto ve ahşap içeriğiyle 1200 kg m -3 nominalyoğun luğa sahip WCCBler üretilmiştir. Basınç dayanımı, u ltra atım h ızı (UPV), su emilimi (WA) ve kalınlıkşişmesi (TS) özellikleri değerlendirilmiştir. Basınç day anımı değerleri 0,25 ila 1,13 N mm-2 arasında değişiklikgösterirken, UPV de ğerleri ise 18.753 ila 49.992 m s -1 arasında değişmiştir. WCCBlerin 672 saat (28 gün) suyabatırılmasının ardından elde edilen ortalama WA değerleri %9,50 ile %47,13 arasında değişiklik gösterirken,tuğlaların TSsinde fark edilir bir değişiklik olmamıştır. Gözlemlenen yoğunluk (OD) 627 ila 1.159 kg m-3 arasındadeğişiklik göstermiştir. UPV açısından T. Scleroxylon un en iyi performansı göstermiş olduğu diğer iki türe oranla,basınç dayanımı açısından üç adet ahşap/çimento içeriğinden elde edilen A. zygia ölçüsel olarak dengeli ve daha iyiolmuştur. Tüm özellikler, arttırılan çimento içeriği ile iyileştirilmiştir. 3,0:1 çimento / ahşap içeriğine sahipWCCBler panel, tavan ve bölümlere ayırma gibi yapısal uygulamalara uygundur.

🔖

Cite This Article

SADİKU, N. A. (2022). Ahşap çimento kompozit tuğlalarında güçlendirici olarak ahşap atıklarının kullanılması. İstanbul Üniversitesi Orman Fakültesi Dergisi, Cilt: 65 - Sayı: 2, 31–37. https://ajindex.com/articles/554336

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Ajayi, B., 2004. Reaction of cement-bonded composites from Gmelina arborea and Leucaena leucocephala to water treatment. Nig erian Journal ofForestry 34(2): 125 -131. Ajayi, B., 2000. Strength and dimensional stability of cement-bonded flakeboard produced from Gmelina and Leucaena leucocephala. PhD thesis. Federal Univ. of Tech., Dept. of Forestry and Wood Tech., Akure, Nigeria, 176pp. ASTM C 67 -03, 2003. Standard test methods for sampling and testing brick and structural clay tile. Philadelp hia, PA: American Society for Testing and Materials
  2. ASTM, 1998. Standard Test Methods for Evaluating Properties of Wood -Base Fiber and Particle Panel Materials. ASTM D 1037 – 96a. The American Society for Testing and Materials, Philadelphia, Annu al Book of ASTM Standards, Vol. 04. 09 Wood. Badejo, S.O.O., 1990. Sawmill wood residues and their utilization. Invited Paper presented at the National Forestry Workshop Management strategies for self sufficiency in Wood production held at Ibadan, June 1 990 Badejo, S.O.O., 1987. An investigation on the influence of cement binder content on properties of cement-bonded particleboards from four Tropical Hardwood species. BS 1881, 1997. Recommendations for measurement of pulse velocity through concrete. London: British Standards Institute
  3. 1997 (Part 203). Del Meneéis, C.H. S., de Castro, V.G., de Souza, M.R., 2007. Production and Properties of a Medium Density Wood - Cement Boards Produced with Oriented Strands and Silica Fume. Maderasz Cienciay Tecnología 9(2): 105 -115. Elinwa, A.U., Mahmood, Y.A., 2002. Ash from timber waste as cement replacement material. Cement and Concrete Composites 24(2): 219 –2 22. Erakhrumen, A.A., Areghan, S.E., Ogunleye, M.B., Larinde, S.L., Odeyale, O.O., 2008. Selected physico -mechanical properties of cement-bonded particleboard made from pine (Pinus caribaea M.) sawdust-coir ( Cocos nucifera L.) mixture. Scientific Research and Essay 3(5): 197 -203. Galetakis, M., Raka, S., 2004. Utilization of limestone dust for artificial stone production: an experimental approach. Minerals Engineering 17: 355 –35 7. Gong, A., Kamdem, D.P., Harichandran, R., 1983. Compression tests on wood -cement particle composites made of CCA -treated wood removed from service. Hachmi, M., Moslemi A.A., Campbell. A.G., 1990. A new technique to classify the compatibility of cement. Wood Science and Technology Journal 11: 14 - 19. Li, G., Yu, Y., Zhao, Z., Li, J., Li, C., 2003. Properties study