SavedAdd your journal

Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2001 / Cilt: 1 - Sayı: 1

Computer-aided design of lumped-distributed, mixed elements interconnect models for high-frequency communication networks

Yüksek frekanslı haberleşme devreleri için, toplu-dağınık, karma elemanlı arabağlaşım modellerinin bilgisayar destekli tasarımı

Ahmet SERTBAŞ
Pages
32–40
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is expected that the proposed technique presented in this paper when incorporated with an simulation tools like Spice, will be useful to model, analyse the interconnects in the design of high speed / high frequency communication systems.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper gives a CAD tool to model the interconnect networks with mixed, lumped and distributed elements encountered in high frequency analog RF design and mobile communication implemented on MMIC.
📊
Key Findings & Data:In this study, a very useful and flexible method for the circuit designer in high frequency/ high speed realizations is presented.
💡
Conclusion & Impact:It is expected that the proposed technique presented in this paper when incorporated with an simulation tools like Spice, will be useful to model, analyse the interconnects in the design of high speed / high frequency communication systems.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This paper gives a CAD tool to model the interconnect networks with mixed, lumped and distributed elements encountered in high frequency analog RF design and mobile communication implemented on MMIC. In this study, a very useful and flexible method for the circuit designer in high frequency/ high speed realizations is presented. It is expected that the proposed technique presented in this paper when incorporated with an simulation tools like Spice, will be useful to model, analyse the interconnects in the design of high speed / high frequency communication systems.

Özet

Bu makalede, özellikle yüksek frekanslarda gerçekleme güçlüğüne bir çözüm olarak arabağlantıların doğru modellerinin belirlenmesi amacıyla bilgisayar destekli yeni bir nümerik algoritma sunulmuştur. Bu çalışma ile birlikte önesürülen karma, toplu ve dağınık elemanlı kayıpsız arabağlaşım (interconnect) modelleri, yöntemin etkinliği göstermek için, UHF anten uyumlaştırma ve tek katlı mikrodalga kuvvetlendirici ön ve son dengeleyici tasarımlarında kullanılmıştır.

🔖

Cite This Article

SERTBAŞ, A. (2022). Computer-aided design of lumped-distributed, mixed elements interconnect models for high-frequency communication networks. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 1 - Sayı: 1, 32–40. https://ajindex.com/articles/543966

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Long J.R., Miles A., ‘Modeling, characterization and design of monolitic inductorsfor silicon RFICs’, in Proceedings of Custom Integrated Circuits Conference (CICC), 1996, pp.185-188
  2. McShane E., Trivedi M., Xu Y., Khandelwal P., Mulay A and Shenai K. ‘One-chip wonders‘, IEEE Circuit & Devices, The Optoelectronics Magazine, vol.14, no.5, Sept. 1998, pp. 35-42
  3. Maloberti F.’ Design of high speed analog circuits for mobile communications ’ in Proceedings of Int’l Conference on Microelectronics’, vol.2, September 1997, pp.673-680
  4. Yarman B.S.and Aksen A.,‘An integrated design tool to construct lossless matching networks with mixed lumped and distributed elements for matching problems’,IEEE Trans. Circuits and Systems, vol.39, pp.713-723, Sept. 1992,
  5. Aksen A.,‘Design of lossless two ports with mixed, lumped and distributed elements for Broadband Matching’, PhD.Dis.,LehrsthuhlfuerNachrichtentechn ic, Ruhr-Universitaet Bochum, 1994
  6. Aksen A. and Yarman B.S.:‘A semi– analytical procedure to describe lossless two-ports with mixed lumped and distributed elements’, IEEE Int. Symp. On Circuit and Systems, vol.5-6, pp.205-208, 1994
  7. Sertbaş A., ‘Description of Generalized Lossless Two -Ports Ladder Networks with Two-variable’, PhD. dissertation, Istanbul University, 1997
  8. Aksen A. and Yarman B.S.: ‘Cascade Synthesis of Two-Variable Lossless Two-Port Networks of Mixed, Lumped Elements and Transmission Lines: A semi–analytical procedure’, NDS-98, Poland, July 12, 1998
  9. Sertbaş A., Yarman B.S.and Aksen A.: ‘Explicit two-variable description of a class of band-pass lossless two- ports with mixed, lumped elements and transmission lines’, NDS-98, Poland, July 12, 1998
  10. Sertbaş A., Aksen A. and Yarman B.S.:‘ Construction of Some Classes of Two- Variable Lossless Ladder Networks with Simple Lumped Elements and Uniform Transmission Lines’, IEEE Asia-Pacific Conference, Thailand, November 24-27, 1998
  11. Sertbaş A., Aksen A. and Yarman B.S.:‘Construction of analog RF circuits with lumped and distributed components for high speed/ high frequency mobile communication MMICs’, ECCTD’99, Stresa-Italy, August 29-September 2, 1999
  12. Fettweis A.,’Factorization of transfer matrices of lossless two-ports’,’IEEE Trans. Circuit Theory, vol.17,, pp.86-94 Feb.1970
  13. Yarman B.S.,’A Simplified Real Frequency Technique for broadband matching complex generator to complex loads,’RCA Review, vol.43, pp.529-541, Sept.1982
  14. Yarman B.S and Carlin H.J., ‘A S