SavedAdd your journal

Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2001 / Cilt: 1 - Sayı: 1

Sacılma yaklaşımı yardımıyla toplu ve dağınık elemanlar kullanarak kayıpsız iki-değişkenli, sınırlı merdiven devrelerin oluşturulması için açık formüller

Explicit formulas for the construction of some classes of lossless two-variable ladder networks using lumped and distributed elements-by scattering approach

Ahmet SERTBAŞ
Pages
49–63
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the end of this study, the application of the proposed method in the design of two-stage microwave FET amplifier is illustrated with an example.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, by using two-variable network functions, the explicit characterizations of lossless ladder networks with lumped and distributed elements are aimed.
📊
Key Findings & Data:The explicit two-variable descriptions of some special classes of lossless ladders networks of low-pass, high-pass, band-pass and band-reject types are presented.
💡
Conclusion & Impact:At the end of this study, the application of the proposed method in the design of two-stage microwave FET amplifier is illustrated with an example.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this paper, by using two-variable network functions, the explicit characterizations of lossless ladder networks with lumped and distributed elements are aimed. The explicit two-variable descriptions of some special classes of lossless ladders networks of low-pass, high-pass, band-pass and band-reject types are presented. The explicit formulas define the mixed elements networks under consideration are obtained up to a certain complexity. At the end of this study, the application of the proposed method in the design of two-stage microwave FET amplifier is illustrated with an example.

Özet

Bu çalışmada, kayıpsız, iki-kapılı devrelerin iki-değişkenli saçılma fonksiyonları yardımıyla oluşturulması problemi ele alınmıştır. Bu amaçla, sınırlı bazı karma, toplu ve dağılmış elemanlı iki-kapılı devre topolojileri incelenerek, ele alınan devreyi tanımlayan saçılma parametrelerine ilişkin açık formüller türetilmiştir. Bu makalede, elde edilen açık formüller, 11.7-12.2 GHz band aralığında, MGF2124 mikrodalga tranzistorlerini içeren çift katlı mikrodalga kuvvetlendirici tasarımına uygulanmıştır.

🔖

Cite This Article

SERTBAŞ, A. (2022). Sacılma yaklaşımı yardımıyla toplu ve dağınık elemanlar kullanarak kayıpsız iki-değişkenli, sınırlı merdiven devrelerin oluşturulması için açık formüller. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 1 - Sayı: 1, 49–63. https://ajindex.com/articles/543958

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. D.C.Youla, ‘Synthesis of n-ports containing lumped and distributed elements’, in P.I. Brooklyn, ed., Proc. Symp. Generalized Netw.,pp.289-343, Polytechnic Press, N.Y., 1966
  2. D.C.Youla, J.D.Rhodes and P.C.Marston, ‘Driving point synthesis of resistor terminated cascades composed of lumped lossless 2-ports and commensurate TEM lines’,IEEETrans. Circuit Theory, vol.CT- 19, pp.648-664, Nov.,1972
  3. N.K.Bose, ‘Applied Multidim. Syst. Theory’,Van Nostrand Reinhold, New York, 1982
  4. B.S.Yarman and A. Aksen,‘An integrated design tool to construct lossless matching networks with mixed lumped and distributed elements for matching problems’,IEEE Trans. Circuits and Systems, vol.39, pp. 713-723, Sept. 1992
  5. A.,Fettweis,‘On the scattering matrix and the scattering transfer matrix of multidimensional lossless two-ports’, Archiv Electr. Übertragung., vol.36, pp.374-381, Sept. 1992
  6. A.Kummert, ‘Synthesis of twodimensional lossless m-ports with prescribed scattering matrix’, Circuit Systems and Signal Processing, vol.8, pp. 97-119, 1989
  7. A.Aksen,‘Design of lossless two ports with mixed,lumped and distributed elements for Broadband Matching’, PhD.Dissert., Lehrsthunlfuer Nachrichtentechnic, Ruhr-Universitaet Bochum, 1994
  8. A. Aksen and B.S.Yarman: ‘A semi– analytical procedure to describe lossless two-ports with mixed lumped and distributed elements’, IEEE Int. Symp. On Circuit and Systems, vol.5-6, pp.205- 208, 1994
  9. A.Sertbas, ‘Description of Generalized Lossless Two-Ports Ladder Networks with Two-variable’; PhD. Dissertation, Istanbul University, 1997. [10]A.Aksen and B.S.Yarman: ‘Cascade Synthesis of Two-Variable Lossless Two-Port Networks of Mixed, Lumped Elements and Transmission Lines: A semi–analytical procedure’,NDS-98, Poland, July 12, 1998. [11]A.Sertbas, A.Aksen and B.S.Yarman: ‘Explicit two-variable description of a class of band-pass lossless two-ports with mixed, lumped elements and transmission lines’, NDS-98, Poland, July 12, 1998
  10. A.,Fettweis, ‘ Factorization of transfer matrices of lossless two-ports’, IEEE Trans. Circuit Theory, vol.17, pp.86-94, feb., 1970
  11. G.P.Young and S.O.Scanlan,‘Matching Network Studies For Microwave Transistor Amplifiers’,IEEE Trans. on Mýcrowave Theory. and Tech, vol. MTT-29, No.10, pp. 1027-1035, October 1981
  12. B.S Yarman and H.J.Carlin, ‘A simplified Real frequency Technique Applied to broadband Multistage Mic. Amp.’, IEEE Trans. on Mýcrowave Theory and Technique, vol.30, pp. 15-2