Cell circuits for the 4 bit adder is realized with the CMOS pass transistors using the 123 decision diagram and 4 bit adder is completed by combining the cells.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:123 decision diagram is a very effective PTL synthesis tool based on binary decision diagram.
📊
Key Findings & Data:In this paper the 123 decision diagram is applied to realize CMOS pass transistor logic circuits without restoring buffers.
💡
Conclusion & Impact:Cell circuits for the 4 bit adder is realized with the CMOS pass transistors using the 123 decision diagram and 4 bit adder is completed by combining the cells.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
123 decision diagram is a very effective PTL synthesis tool based on binary decision diagram. It realizes a logic function using NMOS pass transistors with CMOS restoring buffers. In this paper the 123 decision diagram is applied to realize CMOS pass transistor logic circuits without restoring buffers. Cell circuits for the 4 bit adder is realized with the CMOS pass transistors using the 123 decision diagram and 4 bit adder is completed by combining the cells.
🔖
Cite This Article
YILDIRIM, T., AVCI, M. (2022). Complementary pass transistor logic synthesis with 123 decision diagram. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 4 - Sayı: 1, 1045–1049. https://ajindex.com/articles/543867
Jeakel A., Bandyopadyah S., and Jullien G. A., "Design of Dynamic Pass-Transistor Logic Circuits Using 123 Decision Diagrams”, IEEE Trans. on Circuits and Systems-I, vol. 45, no. 11, pp. 1172-1181, November 1998
Markovic D., Nikolic B., and Oklobdzija V. G., "A General Method in Synthesis of Pass-Transistor Circuits”, Microelectronics Journal, vol. 31, pp. 991-998, 2000
Abadir M. S., Reghabati H. K., “Fuctional Test Generation For Digital Circuits Described Using Binary Decision Diagram”. IEEE Trans. on Comput., Vol C-35, pp 375-379, April 1986
Al-assadi W., Jayasumana A. P. ve Malaia Y. K., “Pass Transistor Logic Design”, Int. Journal of Electronics, Vol 70, pp 739-749, 1991
Cheung T. S., Asada K., “Regenerative Pass Transistor Logic: A Circuit Technique For High Speed Digital Design”, IEICE Transact. on Electronics, Vol E-79C, Iss 9, pp 1274-1284, September 1996
Matsunaga Y., Fujita M., “Multilevel Logic Optimization Using Binary Decision Diagrams”, IEEE Int. Conf. on Computer Aided Design, pp 556-559, 1989
Yano K., Sasaki Y., Rikino K., Seki K., “Top Down Pass Transistor Logic Design”, IEEE Jour. of Solid State Circuits, Vol 31, Iss 6, pp 792-803, 1996.