SavedAdd your journal

Journals / Isı Bilimi ve Tekniği Dergisi / 2008 / Cilt: 28 - Sayı: 1

Sirkülasyonlu akışkan yataklarda yataktan duvara ısı geçişinin simulasyonu

Simulation of bed-to-wall heat transfer in circulating fluidized beds

Afşin GÜNGÖR
Pages
9–16
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Additionally, the simulation matches the measured data quite faithfully for heat transfer coefficient as a function of the suspension density at different temperature values which is also an indicator that that the simulation is valid for both cold and hot CFB units.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the numerical simulation of bed-to-wall heat transfer in CFBs is presented which based on previously developed 2D CFB model which uses the particle-based approach and integrates and simultaneously predicts the hydrodynamics, combustion aspects.
📊
Key Findings & Data:The comparisons of the model predictions and experimental data indicate that the model is flexible enough to operate under different operational conditions concerning superficial velocity, particle diameter and suspension density values.
💡
Conclusion & Impact:Additionally, the simulation matches the measured data quite faithfully for heat transfer coefficient as a function of the suspension density at different temperature values which is also an indicator that that the simulation is valid for both cold and hot CFB units.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the numerical simulation of bed-to-wall heat transfer in CFBs is presented which based on previously developed 2D CFB model which uses the particle-based approach and integrates and simultaneously predicts the hydrodynamics, combustion aspects. The study is also validated with published data. The comparisons of the model predictions and experimental data indicate that the model is flexible enough to operate under different operational conditions concerning superficial velocity, particle diameter and suspension density values. Additionally, the simulation matches the measured data quite faithfully for heat transfer coefficient as a function of the suspension density at different temperature values which is also an indicator that that the simulation is valid for both cold and hot CFB units.

Özet

Bu çalışmada, sirkülasyonlu akışkan yataklı yakıcılarda yataktan duvara ısı geçişinin nümerik simülasyonu yapılmıştır. Simülasyonda, daha önceden geliştirilmiş olan ve hidrodinamik ve yanmayı aynı anda tahmin edebilen ve tanecik yaklaşımını kullanan iki boyutlu sirkülasyonlu akışkan yatak modelinden yararlanılmıştır. Çalışma, aynı zamanda, literatürde yayınlanmış çalışmalarla da doğrulanmıştır. Simülasyon tahminlerinin deneysel verilerle karşılaştırılması; işletme hızı, tane çapı ve yatak yığın yoğunluğu gibi farklı işletme şartları için modelin esnekliğini göstermiştir. Ayrıca, simülasyon sonuçlarının; yatak yığın yoğunluğunun bir fonksiyonu olan ısı geçiş katsayısı için farklı sıcaklık değerlerinde deneysel verilerle göstermiş olduğu uyum, simülasyonun aynı zamanda hem soğuk, hem de sıcak akışkan yataklar için de geçerli olduğunun bir göstergesidir.

🔖

Cite This Article

GÜNGÖR, A. (2022). Sirkülasyonlu akışkan yataklarda yataktan duvara ısı geçişinin simulasyonu. Isı Bilimi ve Tekniği Dergisi, Cilt: 28 - Sayı: 1, 9–16. https://ajindex.com/articles/542625

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Basu, P., Nag, P.K., Heat transfer to walls of a circulating fluidized-bed furnace, Chem. Eng. Sci. 51, 1-26, 1996.
  2. Basu, P., Cheng, L., Cen, K., Heat transfer in a pressurized circulating fluidized bed, Int. J. Heat Mass Transfer 39, 2711-2722, 1996.
  3. Chen, J.C., Grace, J.R., Golriz, M.R., Heat Transfer in Fluidized Beds: Design Methods, Powder Technol. 150, 123-132, 2005.
  4. Feugier, A., Gaulier, C., Martin, G., Some aspects of hydrodynamics, heat transfer and gas combustion in circulating fluidized beds, Proc. of 8th Fluidized Bed Combustion Conference, Morgantown, USA, 613-618, 1987.
  5. Furchi, J.C.L., Goldstein, L., Lombardi, G., Mohseni, M., Experimental Local Heat Transfer in a Circulating Fluidized Bed, Proc. of 2nd Circulating Fluidized Bed Technology Conference, Pergamon, 263-270, 1988.
  6. Glicksman, L.R., Heat Transfer in Circulating Fluidized Beds, Circulating Fluidized Beds, Blackie Academic & Professional (Chapman and Hall), 261-311, 1997.
  7. Gloriz, M.R., An Experimental Correlation for Temperature Distribution at the Membrane Wall of CFB Boilers, Proc. of 13th Fluidized Bed Combustion Conference, NewYork, USA, 499-505, 1995.
  8. Gungor, A., Modeling of Circulating Fluidized Bed Combustors, PhD Thesis, Istanbul Technical University, 2006.
  9. Gungor, A., Eskin, N., Hydrodynamic Modeling of a Circulating Fluidized Bed, Powder Technol. 172, 1-13, 2007.
  10. Gupta, A.V.S.S.K.S., Reddy, B.V. Bed-to-Wall Heat Transfer Modelling in the Top Region of a CFB Riser Column with Abrupt Riser Exit Geometries, Int. J. Heat Mass Transfer 48, 4307-4315, 2005.
  11. Han, G.Y., Tuzla, K., Chen, J., Performance of an Entrained Particle Heat Exchanger, Heat Transfer Eng. 17, 64-71, 1996.
  12. Holman, J.P., Heat Transfer, (7th Ed.), Mcgraw-Hill, 1990.
  13. Leckner, B., Golriz, M.R., Zhang, W., Anderson, B.A., Boundary layer-first measurement in the 12MW research plant at Chalmers University, Proc. of 11th International Fluidized Bed Combustion Conference, Montreal, Canada, 771-776, 1991.
  14. Martin, H., Heat Transfer between Gas Fluidized Beds of Solid Particles and the Surfaces of Immersed Heat Exchanger Elements, Chem. Eng. Process 18, 157-169 (Part I), 199-223 (Part II), 1984.
  15. Mickley, H., Fairbanks, D., Mechanism of Heat Transfer to Fluidized Beds, AIChE J. 1, 374-384, 1955.
  16. Pagliuso, J.D., Lombarbi, G., Goldstein, J.L., Experiments on the Local Heat Transfer Characteristics of A Circulating Fluidized Bed, Experimental Thermal Fluid Sci. 20 (3-4), 170-179, 2000.
  17. Park, C.K., Basu, P., A Model for Predict