Journals / International Journal of Secondary Metabolite / 2020 / Cilt: 7 - Sayı: 4

Characterization of Native Alginates of Common Alginophytes from the Red Sea Coast of Sudan

Pages
266–274
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These values indicated that the present biopolymer is of a potential with regard to pharmaceutical and industrial applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The objective of this investigation was to investigate the content, viscosity, and major functional groups of the native alginates extracted from 4 alginophytes collected from the Red Sea coast of Sudan in order to evaluate the quality of the polymer for potential applications.
📊
Key Findings & Data:The content of the polymer ranged from 7.99±2.60% to 19.1±1.62% based on dry weight in the 4 seaweeds.
💡
Conclusion & Impact:These values indicated that the present biopolymer is of a potential with regard to pharmaceutical and industrial applications.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Alginates · M/G ratio · Viscosity

Abstract

The objective of this investigation was to investigate the content, viscosity, and major functional groups of the native alginates extracted from 4 alginophytes collected from the Red Sea coast of Sudan in order to evaluate the quality of the polymer for potential applications. The content of the polymer ranged from 7.99±2.60% to 19.1±1.62% based on dry weight in the 4 seaweeds. The peak characteristics of the major functional groups of alginates were identified between 3469.70 cm-1 to 451.31 cm-1. These peaks specify the presence of hydroxyl (OH), carbonyl (C=O), and carboxyl (COOH) groups, respectively. The M/G ratios of the alginate extracted from the Sudanese brown macroalgae are ≤ 1 indicating that the proportion of guluronic acid is slightly greater than the mannuronic acid. The alginate with highest viscosity was that of Padina pavonica (Linnaeus) Thivy (190.7±1.14 mPa.s) followed by Dictyota dichotoma (Hudson) J.V.Lamouroux (146.96±1.2 mPa.s), Turbinaria ornata (Turner) J.Agardh (140.1±1.14 mPa.s), and Hormophysa cuneiformis (J.F.Gmelin) P.C.Silva (109±0.6 mPa.s). The values of the parameters of the native alginates extracted from the Sudanese macroalgae are comparatively in conformity with values reported for some species from similar geographical regions. These values indicated that the present biopolymer is of a potential with regard to pharmaceutical and industrial applications.

Özet

The objective of this investigation was to investigate the content, viscosity, and major functional groups of the native alginates extracted from 4 alginophytes collected from the Red Sea coast of Sudan in order to evaluate the quality of the polymer for potential applications. The content of the polymer ranged from 7.99±2.60% to 19.1±1.62% based on dry weight in the 4 seaweeds. The peak characteristics of the major functional groups of alginates were identified between 3469.70 cm-1 to 451.31 cm-1. These peaks specify the presence of hydroxyl (OH), carbonyl (C=O), and carboxyl (COOH) groups, respectively. The M/G ratios of the alginate extracted from the Sudanese brown macroalgae are ≤ 1 indicating that the proportion of guluronic acid is slightly greater than the mannuronic acid. The alginate with highest viscosity was that of Padina pavonica (Linnaeus) Thivy (190.7±1.14 mPa.s) followed by Dictyota dichotoma (Hudson) J.V.Lamouroux (146.96±1.2 mPa.s), Turbinaria ornata (Turner) J.Agardh (140.1±1.14 mPa.s), and Hormophysa cuneiformis (J.F.Gmelin) P.C.Silva (109±0.6 mPa.s). The values of the parameters of the native alginates extracted from the Sudanese macroalgae are comparatively in conformity with values reported for some species from similar geographical regions. These values indicated that the present biopolymer is of a potential with regard to pharmaceutical and industrial applications.

🔖

Cite This Article

Osman, N. A. R., Suliman, T. O., Osman, K. A. (2022). Characterization of Native Alginates of Common Alginophytes from the Red Sea Coast of Sudan. International Journal of Secondary Metabolite, Cilt: 7 - Sayı: 4, 266–274. https://ajindex.com/articles/541624

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Gupta, S., and Abu-Ghannam, N. (2011). Bioactive potential and possible health effects of edible brown seaweeds. Trends in Food Science & Technology, 22, 315-326.
  2. Masuelli, M.A., Illanes, C.O. (2014). Review of the characterization of sodium alginate by intrinsic viscosity measurements. Comparative analysis between conventional and single point methods. International Journal of BioMaterials Science and Engineering, 1(1), 1-11.
  3. Rhein-Knudsen, N., Ale, M.T., Meyer, A.S. (2015). Seaweed Hydrocolloid Production: An Update on Enzyme Assisted Extraction and Modification Technologies. Mar. Drugs, 13, 3340-3359. https://doi.org/10.3390/md13063340
  4. Hernande-Carmona, G. (2013). Conventional and alternative technologies for the extraction of algal polysaccharides. In: Functional Ingredients from Algae for Food and Naturaceuticals. Woodhead Publishing Limited. Szekalska, M., Pucilowska, A., Szymanska, E., Ciosek, P., Winnicka, K. (2016). Alginate: current use and future perspectives in pharmaceutical and biomedical applications. International Journal of Polymer Science, 2016, ID: 7697031. https://doi.org/10.1155/ 2016/7697031 Lee, K.Y., and Mooney, D.J. (2012). Alginate: properties and biomedical applications. Prog Polym Sci., 37 (1), 106–126. https://doi.org/10.1016/j.progpolymsci.2011.06.003
  5. Nalamothu, N., Potluri, A., Muppalla, M. B. (2014). Review on marine alginates and its applications. Indo American Journal of Pharm Research, 4 (10), 4006-4015.
  6. Guarino, V., Caputo, T., Altobelli, R., and Luigi Ambrosio, L. (2015). Degradation properties and metabolic activity of alginate and chitosan polyelectrolytes for drug delivery and tissue engineering applications. AIMS Materials Science, 2(4), 497-502, https://doi.org/10.3934/matersci.2015.4.497
  7. Parreidt, T. S., Müller, K., Schmid, M. (2018). Alginate-Based Edible Films and Coatings for Food Packaging Applications. Foods, 7(170). https://doi.org/10.3390/foods71001 70 Silva, T.L., Vidart, J.M., Silva, M.G., Gimenes, M.L., Vieira, M.G. (2018). Chapter 4 Alginate and Sericin: Environmental and Pharmaceutical Applications. In: Shalaby, E. (edi). Biological Activities and Application of Marine Polysaccharides. AOAC. (1990). Official Methods of Analysis, 16th ed. Association of official Analytical Chemists, Washington, DC. Torres, M.R., Sousa, A.P.A., Filho, E.A.T.S., Melo, D.F., Feitosa, J.P.A., Paulab, R.C.M., Limaa, M.G.S. (2007). Extraction and physicochemical characterization of Sargassum vulgare alginate from Brazil. Car