Journals / International Journal of Engineering and Geosciences / 2019 / Cilt: 4 - Sayı: 3

Positioning buildings on a zoning island to provide maximum shading: a case study

Pages
129–140
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found necessary to carry out this study, since no study was found to be carried out regarding the positioning of buildings in the maximum amount of shade.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Because summer days are long, and the weather is too hot, people desire shady spaces to escape the overwhelming effect of the sun.
📊
Key Findings & Data:For buildings to be built in residential areas, separate or block arrangements are applied.
💡
Conclusion & Impact:It was found necessary to carry out this study, since no study was found to be carried out regarding the positioning of buildings in the maximum amount of shade.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sun Angles · Shading · Building Shading Positions

Abstract

Because summer days are long, and the weather is too hot, people desire shady spaces to escape the overwhelming effect of the sun. To keep buildings and open-air environments in the shade, a suitable building location design may be created at the planning stage. Positioning of buildings and recreation areas in the maximum amount of shade is closely dependent on the location of the buildings to be built, the distance between the buildings, the time of the day and the sun angles at a particular hour. It was found necessary to carry out this study, since no study was found to be carried out regarding the positioning of buildings in the maximum amount of shade. For buildings to be built in residential areas, separate or block arrangements are applied. This study discusses a building to be built on a reconstruction island in Adana in the Eastern Mediterranean Region of Turkey. First of all, the shading effects of the buildings adjacent to the building in a parcel were examined in detail based on various positions of the façades of the building and different values of the solar azimuth. As a result of the study, the positioning of the buildings for providing the maximum shading was investigated. If the front and rear façades of the buildings were located in the west-east direction, according to the positioning of the buildings in the north-south direction, the front and rear façades would be exposed to less sunlight and more shade. In h = ± 6 sun hours, the façades of buildings in the parcels facing the north were under the influence of the sun rays coming from the side, and the rear façades of the buildings were in the shade.

🔖

Cite This Article

ERDEM, N., İNCE, H. (2022). Positioning buildings on a zoning island to provide maximum shading: a case study. International Journal of Engineering and Geosciences, Cilt: 4 - Sayı: 3, 129–140. https://ajindex.com/articles/540721

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Abood, A. A. (2015), “A Comprehensive solar angles simulation and calculation using Matlab”, International Journal of Energy and Environment (IJEE), Volume 6, Issue 4, pp. 367-376.
  2. Al-Sareef, F. M., Oldham, D. J., Carter, D. J. (2001), “A computer model for predicting the daylight performance of complex paralel shading systems,” Building and Environment, n: 36; 605-18.
  3. Anderson, J.M. and Mikhail, E.M. (1998), “Surveying theory and practice”, 7th ed. Boston, MA: Mc Graw Hill. Arumı-Noe, F. (1996), “Algorithm for geometric contruction of an optimum shading”, Automation in Construction, n: 5; 211-7.
  4. Atabek, E. (1996), “Computer aided shadowing effect analysis of buildings”, Yüksek Lisans Tezi, Mimarlık Bölümü, ODTÜ, Ankara.
  5. Bannister, A., Raymond, S. and Baker, R. (1998), “Surveying”. 7th ed. Harlow, UK: Addison Wesley Longman Limited Edinburg Gate, 81–82.
  6. Capeluto, G.I., Yezioro, A., Shaviv, E. (2003), “Climatic Aspects in Urban Design: A Case Study”, Building and Environment, Vol.38, Issue 6, pp.827-83.
  7. Data G. (2001), “Effect of fixed horizontal louver shading devices on thermal performance of building by TRNSYS simulation”, Renewable Energy, n: 23; 497-507.
  8. Erdem, N., and İnce, H. (2016), “The Proposal Of The Building Application For More Benefiting From Solar Light”, International Journal of Engineering and Geosciences, 1 (1), 7-14. DOI: 10.26833/ijeg.285215 Ekercin, S, Orhan, O, Dadaser-Celik, F. (2019), “Investigating Land Surface Temperature Changes Using Landsat-5 Data And Real-Time Infrared Thermometer Measurements at Konya Closed Basin in Turkey”, International Journal of Engineering and Geosciences, 4 (1), 16-27. DOI: 10.26833/ijeg.417151 Farr, D. (2008), “Sustainable Urbanism: Urban Design with Nature”, Wiley, New Jersey. Kuşak, L, Küçükali, U. (2019), “Outlier Detection of Land Surface Temperature: Küçükçekmece Region”, International Journal of Engineering and Geosciences, 4 (1), 1-7. DOI: 10.26833/ijeg.404426 İnce, H., and Erdem, N. (2018), “Gün Işığından Azami Yararlanacak Şekilde Yapılacak Binalar İçin Alan Tasarrufu Bakımından Parsel Konumunun Araştırılması”, Mühendislik Alanında Akademik Araştırmalar, ISBN.978-605-288-390-7, www.gecekitapligi.com, s.143-161,
  9. Ankara.
  10. Mcmullan, R. (1990), “Environmental Science in Building”, Macmillan, Hong Kong. Ok, V. (1992), “A procedure for calculation cooling load due to solar radiation: the shading effects from adjacent or nearby buildings”, Energy and Buildings, Vol.19, 11 – 20. Oktay, D. (2004), “Urba