Journals / International Journal of Automotive Engineering and Technologies / 2016 / Cilt: 5 - Sayı: 2

Effect of mixing chamber or carburetor type on the performance of diesel engine operated on biodiesel and producer gas induction

Pages
25–37
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Based on the results obtained, it was found that parallel flow gas entry carburetor resulted in better mixing of air and producer gas.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Biodiesel-producer gas fueled dual fuel engine suffers from lower brake thermal efficiency (BTE) with higher unburned hydrocarbon (HC) and carbon monoxide (CO) emissions at all loads.
📊
Key Findings & Data:In the first phase of the work, mixing chambers were analyzed for its mixing performance using experimental approach.
💡
Conclusion & Impact:Based on the results obtained, it was found that parallel flow gas entry carburetor resulted in better mixing of air and producer gas.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Biodiesel-producer gas fueled dual fuel engine suffers from lower brake thermal efficiency (BTE) with higher unburned hydrocarbon (HC) and carbon monoxide (CO) emissions at all loads. In this present work, to harness energy from producer gas and ensure air and producer gas mixing quality, different mixing chambers (carburetors) have been developed. In the first phase of the work, mixing chambers were analyzed for its mixing performance using experimental approach. Different carburetors were drawn from Y- shape having 45, 60, 900 gas entries as well as with parallel flow gas entry. Based on the results obtained, it was found that parallel flow gas entry carburetor resulted in better mixing of air and producer gas. In the next phase of the work, experimental investigations were conducted to study the effect of air-producer gas mixture quality on the performance, combustion and emission characteristics of single cylinder, four strokes direct injection diesel engine developing 3.7 kW at 1500 rpm operated on dual fuel mode with Honge oil methyl ester (HOME) and producer gas induction. Experimental investigation showed that all carburetors except parallel flow gas entry carburetor resulted in lower performance. Dual fuel engine with parallel flow gas entry carburetor showed 5 to 8 % increased BTE with reduced smoke, HC and CO emission levels compared to other carburetors tested. Based on the study, it is concluded that this area still requires more research with long term engine operation.

🔖

Cite This Article

BANAPURMATH, N. R., YALİWAL, V. S., REVENAKAR, S., TEWARİ, P. G. (2022). Effect of mixing chamber or carburetor type on the performance of diesel engine operated on biodiesel and producer gas induction. International Journal of Automotive Engineering and Technologies, Cilt: 5 - Sayı: 2, 25–37. https://ajindex.com/articles/540358

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Deepak A., Kumar A. A., 2007. "Performance Characteristics (Preheated and Blends) in a Direct Injection Compression Ignition Engine." International Journal of Applied Thermal Engineering 27: 2314-2323
  2. Emission of a Jatropha Oil 2. Nwafor O. M. I. 2000. "Effect of Advanced Injection Timing on the Performance of Rapeseed Oil in Diesel Engines." Renewable Energy 21: 433- 444
  3. Nwafor, O. M. I. 2003. "The Effect of Elevated Fuel Inlet Temperature on Performance of Diesel Engine Running on Neat Vegetable Oil at Constant Speed Conditions." Renewable Energy 28: 171- 181
  4. Scholl, K. W., Sorenson S. C., 1993. "Combustion Analysis of Soyabean Oil Methyl Ester in a Direct Injection Diesel Engine." Society of Automotive Engineers. Paper No. 930-934
  5. Yaliwal V.S., Nataraja K.M., Banapurmath N.R., Tewari P.G., Honge oil methyl ester and producer gas-fuelled dual-fuel engine operated with varying compression ratios, International Journal of Sustainable Engineering, 2013. DOI: 10.1080/19397038.2013.837108
  6. Khiari K., Awad S., Loubar K., Tarabet L., Mahmoud R., Tazerout M., Experimental investigation of pistacia lentiscus biodiesel as a fuel for direct injection diesel engine, Energy Conversion and Management, Volume 108, 15 January 2016, Pages 392-399 7. Senthilkumar S., Sivakumar G., Siddarth Manoharan, Investigation of palm methyl-ester bio-diesel with additive on performance and emission characteristics of a diesel engine under 8-mode testing cycle, Alexandria Engineering Journal, Volume 54, Issue 3, September 2015, Pages 423-428 8. Roy Murari Mohon, Eiji Tomita, Nobuyuki Kawahara, Yuji Harada, Atsushi Sakane. 2009. "Effect of Fuel Injection Parameters on Engine Performance and Emissions of a Supercharged Producer Gas-Diesel Dual Fuel Engine." Society of Automotive Engineers. Paper No. 2009-01-1848
  7. Banapurmath N. R., Yaliwal V. S., Satish Kambalimath, Hunashyal A. M., Tewari P. G., 2011. "Effect of Biomass feed stock, carburetor, Compression Ratio and Biodiesel- Ethanol Blends on the Performance of Dual Fuel Engine." Waste and Biomass Valorization 2 (4): 403-413. doi: 10.1007/s12649- 011- 9083
  8. Yaliwal V.S., Banapurmath N.R., Gireesh N.M., Tewari P.G., "Production and utilization of renewable and sustainable gaseous fuel for power generation applications: A review of literature". Renewable and Sustainable Energy Reviews, Elsevier publications, 34, 2014, 608-627
  9. Yaliwal V.S., Banapurmath N.R., Gireesh N.M., Hosmath R.S., Teresa Donateo, Te