Journals / International Journal of Automotive Engineering and Technologies / 2020 / Cilt: 9 - Sayı: 1

Combustion, performance and emission caracteristics of a HCCI engine fuelled with n-butanol/n-heptane blends

Pages
1–10
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

HC and CO emissionsincreased with increasing amount of n-butanol in the charge mixture.Operating range of HCCI engine was expanded with n-butanol in bothknocking and misfiring zones.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Homegeneous charge compression ignition (HCCI) combustion canachieve very low NOx and soot emissions but knocking and misfiringrestrict the operating range of this kind of engines.
📊
Key Findings & Data:In this work, n-butanolwhich has low reactivity and high volatility blended with n-heptane thatchoosen as reference fuel in this study with various rates (25 vol% and 50vol%).
💡
Conclusion & Impact:HC and CO emissionsincreased with increasing amount of n-butanol in the charge mixture.Operating range of HCCI engine was expanded with n-butanol in bothknocking and misfiring zones.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Homegeneous charge compression ignition (HCCI) combustion canachieve very low NOx and soot emissions but knocking and misfiringrestrict the operating range of this kind of engines. In this work, n-butanolwhich has low reactivity and high volatility blended with n-heptane thatchoosen as reference fuel in this study with various rates (25 vol% and 50vol%). The experiments performed at various engine speeds (800-1800)and lambda (λ=1.6-2.95) at full load and 60 oC inlet air temperature. theparameters such as in-cylinder pressure, heat release rate, CA10, ringingintensity, thermal efficiency, brake torque, power output, specific fuelconsumption, and HC and CO emissions were determined. The resultsshowed that both in-cylinder pressure and heat release rate decreased withincreasing lambda. Increasing amount of n-butanol in the charge mixtureresulted a decrease both in-cylinder pressure and heat release rate. nbutanol also provided retarded combustion phasing and increased CA10.Ringing intensity decreased with increasing both lambda and n-butanolcontent in the mixture. Thermal efficiency increased with n-butanol. HCand CO emissions increased with increasing lambda. HC and CO emissionsincreased with increasing amount of n-butanol in the charge mixture.Operating range of HCCI engine was expanded with n-butanol in bothknocking and misfiring zones.

🔖

Cite This Article

CALAM, A., AYDOĞAN, B. (2022). Combustion, performance and emission caracteristics of a HCCI engine fuelled with n-butanol/n-heptane blends. International Journal of Automotive Engineering and Technologies, Cilt: 9 - Sayı: 1, 1–10. https://ajindex.com/articles/540293

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Gul, Z., M. Yılmaz, H. Koten, I. H., Savcı, “Advanced Numerical and experimental studies on CI engine emissions”, Journal of Thermal Engineering, 4 (4), 2234-2247, 2018
  2. Strozzi, C., Claverie, A., Prevost, V., Sotton, J., and Bellenoue, M., “HCCI and SICI combustion modes analysis with simultaneous PLIF imaging of formaldehyde and high-speed chemiluminescence in a rapid compression machine”, Combustion and Flame, 202, 58-77, 2019
  3. Maurya, R.K. and Akhil, N., “Development of a new reduced hydrogen combustion mechanism with NOx and parametric study of hydrogen HCCI combustion using stochastic reactor model”. Energy Conversion and Management, 132: 65-81, 2017
  4. Kumar, P. and Rehman A., “Bio-diesel in homogeneous charge compression ignition (HCCI) combustion”, Renewable and Sustainable Energy Reviews, 56, 536-550, 2016
  5. Wang, Z., Du, G., Li, Z., Wang, X., and Wang, D., “Study on the combustion characteristics of a high compression ratio HCCI engine fueled with natural gas”, Fuel, 255, 115701, 2019
  6. Vélez Godiño, J.A., Jiménez-Espadafor Aguilar F.J., and García M.T., “Simulation of HCCI combustion in air-cooled off-road engines fuelled with diesel and biodiesel”, Journal of the Energy Institute, 91(4), 549-562, 2018
  7. Cinar, C., Uyumaz, A., Solmaz, H., Sahin, F., Polat, S., Yılmaz, E., “Effects of intake air temperature on combustion, performance and emission characteristics of a HCCI engine fueled with the blends of 20% nheptane and 80% isooctane fuels”, Fuel Processing Technology, 130, 275-281, 2015
  8. Garcia, M.T., Aguilar, F., Lancero, T.S., and Villanueva, J.A.B., “A new heat release rate (HRR) law for homogeneous charge compression ignition (HCCI) combustion mode”, Applied Thermal Engineering, 29(17- 18), 3654-3662, 2009
  9. Bai, J., Wang, Q., H.E, Z., Li, C., and Pan, J., “Study on methane HCCI combustion process of micro free-piston power device”, Applied Thermal Engineering, 73(1), 1066- 1075, 2014
  10. Turkcan, A., Ozsezen A.N., and Canakci M., “Effects of second injection timing on combustion characteristics of a two stage direct injection gasoline-alcohol HCCI engine”, Fuel, 111: 30-39, 2013
  11. Schönborn, A., Hellier, P., Aliev, A.E., “Ignition control of homogeneous-charge compression ignition (HCCI) combustion through adaptation of the fuel molecular structure by reaction with ozone”, Fuel, 89 (11), 3178-3184, 2010
  12. Zhang, C., Zhang, C., Xue, L., Li, Y., “Combustion characteristics and operation range of a RCCI combustion