SavedAdd your journal

Journals / International Journal of Automotive Engineering and Technologies / 2021 / Cilt: 10 - Sayı: 1

Investigation of effects of boron additives on performance of cam mechanisms

Hasan BAŞ
Pages
60–66
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

And also,the influences of the minimize interface friction has been observed underdifferent test conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The use of additives in the contacting surfaces is essential for the formationof a thin lubricant film, which separates the moving surfaces from eachother.
📊
Key Findings & Data:Boron compounds, in particular, are very helpful for the slidingsurfaces.
💡
Conclusion & Impact:And also,the influences of the minimize interface friction has been observed underdifferent test conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The use of additives in the contacting surfaces is essential for the formationof a thin lubricant film, which separates the moving surfaces from eachother. Boron compounds, in particular, are very helpful for the slidingsurfaces. The aim of the investigation is to clarify how the boron additivesinfluence the lubricating ability of the engine oil using in the sliding contactof the cam-follower. In this study, the considerable results in the tests ofengine oil with boron compounds and with base oil are obtained. And also,the influences of the minimize interface friction has been observed underdifferent test conditions.

🔖

Cite This Article

BAŞ, H. (2022). Investigation of effects of boron additives on performance of cam mechanisms. International Journal of Automotive Engineering and Technologies, Cilt: 10 - Sayı: 1, 60–66. https://ajindex.com/articles/540273

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. H. Hirani, Mixed Lubrication. In Fundamentals of Engineering Tribology with Applications (pp. 326-370). Cambridge: Cambridge University Press. 2016
  2. H. Bas and Y. E. Karabacak, “Investigation of the Effects of Boron Additives on the Performance of Engine Oil,” Tribology Transactions, 57:4, 740-748, 2014
  3. T. Bartels, “Lubricants, 5. Gear Lubrication Oils”, Ullmann's Encyclopedia of Industrial Chemistry, ISBN: 9783527306732, 2011
  4. J. M. Herdan, “Friction modifiers in engine and gear oils”, Lubrication. Science, 12, 3, pp. 265-276, 2000
  5. F. U. Shah, “Boron Compounds as Additives to Lubricants, Synthesis, Characterization and Tribological, Optimization”, Lulea University of technology, 2009
  6. B. A. Baldwin, “Relative antiwear efficiency of boron and sulphur surface species”, Wear, 45, 3, pp. 345-353, 1977
  7. Y. Kimura, T. Wakabayashi, K. Okada, T. Wada, and H. Nishikawa, “Boron nitride as a lubricant additive”, Wear, 232, 199, pp. 206.56, 1999. A. Erdemir, “Advances in Boron-Based Lubricants and Lubrication Additives”, IV International Boron Symposium, October Eskisehir, Turkey, 2009
  8. F. Chinas-Castillo and H. A. Spikes, “Mechanism of action of colloidal solid dispersions”, J. Tribology-Trans., ASME, 125, 3 pp. 552-557, 2003
  9. P. J. Pacholke and K. M. Marshek, “Improved worm gear performance with colloidal molybdenum-disulfide containing lubricants”, Lubr. Eng., 43, pp. 623-628, 1987
  10. R. S. Barnett, “Molybdenum disulfide as an additive for lubricating greases”, Lubr. Eng., 33, 308-313, 1977
  11. Erdemir, “Solid lubricants and selflubricating films, in “Handbook of Modern Tribology,” B. Bhushan, ed., CRC Press, Boco Raton, FL, pp. 787-818, 2001
  12. G.W Rowe, “Some observations on the frictional behaviour of boron nitride and of graphite”, Wear, 3, 4, pp. 274–285, 1960
  13. J. M. Martin, T. LeMogne, C. Chassagnette, and M. N. Gardos, “Friction of hexagonal boron nitride in various environments”, Tribol. Trans., 35, 463-472, 1992
  14. C. C. Klepper, J. M. Williams, J. J. J. Truhan, J. Qu, L. Riester, R. C. Hazelton, J. J Moschella, P. J. Blau, J. P. Anderson, O. O. Popoola and M. D. Keitz ”Tribomechanical properties of thin boron coatings deposited on polished cobalt alloy surfaces for orthopedic applications”, Thin Solid Films, 516, 10, pp. 3070–3080, 2008
  15. M. Lovell, C. F. Higgs, P. Deshmukh and A. Moble, “Increasing formability in sheet metal stamping operations using environmentally friendly lubricants”, J. Mat. Pro.Tech. 177,