Journals / Hacettepe Journal of Biology and Chemistry / 2007 / Cilt: 35 - Sayı: 2

Reactive brown 10-atteched polyamide hollow fiber for reversible amyloglucosidase immobilization

Pages
149–155
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found as 18.4 $mu mol/g$ hollow fiber.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Amyloglucosidase (AMG) [$alpha$-1, 4-D-glucan glucohydrolase (E.C.3.2.1.3)] is an exo-enzyme, which is used in the hydrolysis of starch to glucose in industry.
📊
Key Findings & Data:In this study,AMG was immobilized onto Reactive Brown 10-attached polyamide hollow fibers.
💡
Conclusion & Impact:It was found as 18.4 $mu mol/g$ hollow fiber.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Amyloglucosidase (AMG) [$alpha$-1, 4-D-glucan glucohydrolase (E.C.3.2.1.3)] is an exo-enzyme, which is used in the hydrolysis of starch to glucose in industry. In this study,AMG was immobilized onto Reactive Brown 10-attached polyamide hollow fibers. Dye-attached hollow fibers were characterized by scanning electron microscopy. The amount of attached dye was determined by elementel analysis considering the sulphur stoichiometry. It was found as 18.4 $mu mol/g$ hollow fiber. Affecting factors, pH and initial AMG concentration, on the immobilization was investigated. Maximum AMG immobilization was achieved at pH 4.0, and adsorption capacity of hollow fibers increased by increasing initial AMG concentration and reached the plateau at 1.5 mg/mL. The effects of temperature and pH on the enzyme activity were also investigated. Immobilized enzyme has a wider pH dependence around pH 4.0-5.0, but free enzyme has optimal pH at its pI value, pH 4.5. Optimal temperature for immobilized enzyme was determined as 65°C, which is higher than free enzyme, 60°C. The immobilization process increased the thermal stability of AMG. In 180 min, although free enzyme lost the activity about 60% at 60°C, immobilized enzyme lost only 20% at same temperature. Significant amount of the immobilized AMG was desorbed using 1.0 M NaCl at pH 3.0. In order to determine the effects of adsorption and desorption conditions on possible conformational changes of AMG, fluorescence spect-rophotometry was employed. It was concluded that polyamide dye-affinity hollow fibers can be applied for AMG immobilization without causing any significant conformational changes. $K_M$ and Vmax values of immobilized and free enzymes were found to be 1.08 and 1.31 mg/mL and 4.53 and 1.94 $mu$ mol/mg.min, respectively. The $K_M$ value of the immobilized AMG was 1.2-fold higher than that of the free one. The $V_{max}$ value of the free AMG was found to be higher than that of the immobilized AMG. These results showed that Reactive Brown 10-attached hollow fiber can be used for reversible immobilization of AMG in biotechnological applications.

🔖

Cite This Article

YILMAZ, E., YILMAZ, F., DENİZLİ, A., UZUN, L. (2022). Reactive brown 10-atteched polyamide hollow fiber for reversible amyloglucosidase immobilization. Hacettepe Journal of Biology and Chemistry, Cilt: 35 - Sayı: 2, 149–155. https://ajindex.com/articles/529391

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (29)

  1. F.M. Baustista, M.C. Bravo, J.M. Campelo, A. Garcia, D. Luna, J.M. Marinas and A.A. Remore, J. Mol. Catal. B: Enzym. 6 (1999) 473
  2. S. Akgol and A. Denizli, J. Mol. Catal. B: Enzym. 28 (2004) 7
  3. G. Sanjay and S. Sugunan, Catal. Commun. 6 (2005) 525
  4. R. Torres, B.C.C. Pessela, C. Mateo, C. Ortiz, M. Fuentes, J.M. Guisan and R. Fernandez-Lafuente, Biotechnol. Progr. 20 (2004)1297
  5. M.E. Marín-Zamoraa, F. Rojas-Melgarejoa, F. García-Canovasb and P.A. García-Ruiz, J. Biotechnol. 126 (2006) 295
  6. M. Rebros, M. Rosenberg, Z. Mlichova, L. Kristofíkova and M. Paluch, Enzyme Microb. Technol. 39 (2006) 800
  7. L. Cao, F. van Rantwijk and R.A. Sheldon, Org. Lett. 2 (2000) 1361
  8. F.J. Xu, Q.J. Cai, Y.L. Li, E.T. Kang and K.G. Neoh, Biomacromolecules 6 (2005) 1012
  9. M. Sarı, S. Akgöl, M. Karataş and A. Denizli, Ind. Eng. Chem. Res. 45 (2006) 3036
  10. N. Alonso-Morales, F. Lopez-Gallego, L. Betancor, A. Hidalgo, C. Mateo, R. Fernandez-Lafuente and J.M. Guisan, Biotechnol. Prog. 20 (2004) 533
  11. M. Burger, K. Beran, Collect. Czech. Chem. Commun. 22 (1957) 299
  12. S.F. D’Souza, Curr. Sci. 35 (1999) 69
  13. E. Katchalski-Katzir and D.M. Kraemer, J. Mol. Catal. B: Enzym. 10 (2000) 157
  14. R.F. Taylor, Protein Immobilization. Fundamentals and Applications, Marcel Decker, New York (1991)
  15. J. Bryjak, J. Aniulyte, J. Liesiene, Carbohydrate Research, 342 (2007) 1105
  16. J.E. Bailey and Y.K. Cho, Biotechnol. Bioeng. 25 (1983) 1923
  17. T. Handa, A. Hirose, S. Yoshida and H. Tsuchiya, Biotech. Bioeng. 24 (1982) 1639
  18. V.S. Nithianandam, S.V. Srinivasan, K.T. Joseph and M. Santappa, Biotech. Bioeng. 23 (1981) 2273
  19. T. Uhlich, M. Ulbricht and G. Tomaschewski, Enzyme Microb. Technol. 19 (1996) 124
  20. K.A. Ram and K. Venkatasubramanian, Biotechnol. Bioeng. 24 (1982) 355
  21. J.M.S. Cabral, J.M. Novais and J.P. Cardodo, Biotechnol. Bioeng. 23 (1981) 2083
  22. G.M. Zanin, F.F. De Moraes, Appl. Biochem. Biotechnol. 51 (1995) 253
  23. M. Cantarella, L. Cantarella and F. Alfani, Brit. Poly. J. 20 (1988) 477
  24. D.D. Lee, G.K. Lee, P.J. Reilly and Y.Y. Lee, Biotechnol. Bioeng. 22 (1980) 1
  25. S. Akgöl, H. Yavuz, S. Şenel and A. Denizli, React. Functl. Polymer. 55 (2003) 45
  26. C. Charcosset, J. Chem. Technol. Biotechnol. 71 (1998) 95
  27. X. Zeng and E. Ruckenstein, Biotechnol. Prog. 15 (1999) 1003
  28. Y.D. Tsai and S.Y. Suen, Ind. Eng. Chem. Res. 40 (2001) 854
  29. A. Kassab, H. Yavuz, M. Odabaşı and A. Denizli, J. Chro