Journals / Hacettepe Dişhekimliği Fakültesi Derg.(. Clinical Dentistry and Research) / 2002 / Cilt: 26 - Sayı: 2

The investigation of bond strength of amalgam to dentin by using different resin meterials

Farklı adeziv rezinler kullanılarak uygulanan amalgamın dentine bağlanma dayanımının incelenmesi

Pages
26–31
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Unbonded amalgam group showed significantly lower bond strength than all the bonded amalgam groups (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study compared the bond strength of amalgam bonded with one bottle adhesive system (Single Bond), one dual-cure adhesive system (Clearfil Liner Bond 2 V), and a dual-cure resin composite luting cement (Panavia F) to unbonded amalgam using push-out test method. 52 recently extracted sound human third molars were used.
📊
Key Findings & Data:Cavities 3 mm in height and 2.2 mm in diameter were prepared with tungsten carbide bur perpendicularly to occlusal surface.
💡
Conclusion & Impact:Unbonded amalgam group showed significantly lower bond strength than all the bonded amalgam groups (p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study compared the bond strength of amalgam bonded with one bottle adhesive system (Single Bond), one dual-cure adhesive system (Clearfil Liner Bond 2 V), and a dual-cure resin composite luting cement (Panavia F) to unbonded amalgam using push-out test method. 52 recently extracted sound human third molars were used. The occlusal surfaces were ground to expose the dentin. Cavities 3 mm in height and 2.2 mm in diameter were prepared with tungsten carbide bur perpendicularly to occlusal surface. All materials were applied according to manufacturers' instructions and amalgam was condensed. 24 hours after condensation, dentin disc of 2 mm including amalgam restorations were cut from samples. The dentin discs were seated on a universal testing machine and a force of cross-speed of 1 mm/min was applied until amalgam was fully pushed out from the cavity. Krusskal Wallis One-Way ANOVA and Mann Witney-U tests were used for statistical analyzes. Unbonded amalgam group showed significantly lower bond strength than all the bonded amalgam groups (p

Özet

Bu çalışmada bir one - bottle adeziv sistem (Single bond), bir dual-cure adeziv sistem (Clearfil Liner Bond 2 V) ve bir dual-cure kompozit rezin luting siman (Panavia F) ile beraber kullanılan amalgam restorasyonların dentine bağlanma dayanımı, sadece amalgam kullanılan restorasyon-1 larla push-out test metodu kullanılarak karşılaştırıldı. 52 adet yeni çekilmiş insan 3. molar azı dişleri kullanıldı. Dentini düz bir yüzey halinde çıkartmak için okluzal yüzeyler aşındırıldı. Okluzal yüzeye dik bir şekilde tungsten karbit frez ile pa-ralelometre kullanılarak 2.2 mm çapında ve 3 mm derinliğinde standart kaviteler açıldı. Bütün materyaller üretici firmaların direktifleri doğrultusunda uygulandı ve amalgam kondanse edildi. Kondansasyondan 24 saat sonra örneklerden 2 mm kalınlığında amalgam restorasyon içeren dentin diskleri kesit makinesi yardımıyla alındı. Dentin diskleri bir Universal Test cihazına yerleştirildi ve amalgam kaviteden bütünüyle çıkana kadar 1 mm/dk'lık hız ile silindirik metal bir uç vasıtasıyla kuvvet uygulandı. İstatistiksel analizler için Krusskal Wallis One Way ANOVA ve Mann Whitney-U testleri kullanıldı. Sadece amalgam restorasyon uygulanan grup, diğer bütün adeziv sistem uygulanmış amalgam restorasyonlu gruplardan önemli derecede daha küçük bağlanma dayanımı gösterdi (p

🔖

Cite This Article

ÖZER, F., ŞENGÜN, A., KARAKAYA, Ş., KUŞDEMİR, M. (2022). The investigation of bond strength of amalgam to dentin by using different resin meterials. Hacettepe Dişhekimliği Fakültesi Derg.(. Clinical Dentistry and Research), Cilt: 26 - Sayı: 2, 26–31. https://ajindex.com/articles/528645

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Craig RG. Restorative Dental Materials. 7 th de. St. Louis: CV Mosby, 1985 2.Lacy AM, Staninec MA. The bonded amalgam restoration. Quintessence Int. 1989; 20: 521 - 524 3.Zardiackas LD, Storer GE. Tensile and shear adhesion of amalgam to tooth structure using selective interfacial amalgamation. Biomaterials 1983; 4: 9 - 13 4.Staninec M. Retention of amalgam restorations: Undercuts versus bonding. Quintessence Int 1989; 20: 347 - 351 5.Belcher MA, Stewart GP. Two - year clinical evaluation of an amalgam adhesive JADA 1997; 128 (3): 309 -314 6.Browning WD, Johnson WW, Gregory NP. Clinical performance of bonded amalgam restorations at 42 months. JADA May 2000; 607-611 7.Geiger SB, Mazor Y, Klein E, Judes H.Characterization of Dentin - Bonding - Amalgam interfaces. Operative Dentistry 2001; 26: 239 - 247 8.Nakabayashi N, Ashizawa M, Nakamura M. Identification of a resin - dentin hybrid layer in vital human dentin created in vivo: Durable bonding to vital dentin. Quintessence International 1992; 23 (2). 135 -141 9.Eakle WS, Staninec M, Yip RL, Chavez M. Mechanical retention versus bonding of amalgam and gallium alloy restorations. J. Prosthetic Dentistry 1994; 72: 351 -354 10.Hadavi F, Hey HJ, Strasdin RB, McMeekin GP. Bonding amalgam to dentin by different methods. J. Prosthetic Dentistry 1994; 72 (5). 250 - 254 11.Eakle WS, Staninec M, Lacy AM. Effect of bonded amalgam on the fracture resistance of teeth. JProsthetic dentistry 1992; 68 (2): 257 - 260 12.Gordan W, Mjor IA, Hucke RD, Smith GE. Effect of different liner treatments on postoperative sensitivity of amalgam restorations. Quintessence International 1999; 30 (1); 55 - 59 13.Al-Moayad M, Aboush YEY, Elderton R. Bonded amalgam restorations; a comperative study of glass ionomer and resin adhesives. Dent. Mater. 1993; 20: 363 - 367 14.Martin N, Jedynakiewicz N. Amalgam - enamel adhesive bond strengths. J Dent. Res. 1991; 70: 685 15.Temple - Smithson PE, Causton BE, Marshall KF. The Adhesive amalgam - fact or fiction Br Dent. J1992; 172: 282 - 287 16.Charlton DG, Moore BK, Swartz ML. In vitro evaluation of the use of resin liners to reduce microleakage and improve retention of amalgam restorations. Oper. Dent. 1992; 17: 112 - 119 17.Shimuzu A, Ui T, Kawakami M. Bond strength between amalgam and tooth hard tissues with application of fluoride, glass ionomer cement and adhesive resin cement in various combinations. Dent. Mater.; 5: 225 -232 18.Cooley RL, Mc Court JW, Tram TE. Bond strength of resin to amal