Journals / Geosound / 2006 / Cilt: 0 - Sayı: 48-49

Investigation of determination of rock mass properties by image processing methods

Görüntü işleme yöntemleri ile kaya kütlesi özelliklerinin tespit edilebilirliğinin araştırılması

Journal
Geosound
Pages
237–255
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Within the Rock Image Analysis programme that has been developed, image analysis methods have been applied and a field study has been conducted.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Image processing and image analysis methods develop parallel to the imaging technology and find usage areas in several disciplines.
📊
Key Findings & Data:Image analysis methods, which should be taken rapidly with minimal error especially in the field of geosicences, have expedited in the last two decades.
💡
Conclusion & Impact:Within the Rock Image Analysis programme that has been developed, image analysis methods have been applied and a field study has been conducted.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Image processing and image analysis methods develop parallel to the imaging technology and find usage areas in several disciplines. Image analysis methods, which should be taken rapidly with minimal error especially in the field of geosicences, have expedited in the last two decades. The applicability of image processing and image analysis methods in spacing and intervals of discontinuities which are important parameters for the classification of rock masses has been investigated. Besides, studies relevant to the subject have been mentioned, the basic fundamentals of image processing and analysis methods and also the image properties of rock masses have been introduced. Within the Rock Image Analysis programme that has been developed, image analysis methods have been applied and a field study has been conducted.

Özet

Görüntü işleme ve görüntü analizi yöntemleri, görüntü alma teknolojisinin gelişmesine paralel olarak gelişmekte ve farklı disiplinlerde kendine kullanım alanı bulmaktadır. Özellikle hızlı alınması gereken ve hata yapma oranı fazla olan ölçüm yöntemlerine alternatif olarak çalışmaların yapıldığı görüntü analizi yönemlerinin, yerbilimlerine uygulanabilirliğinin araştırılması son yirmi yıl içerisinde hız kazanmıştır. Bu çalışmada kaya kütlelerinin tanımlanması ve mühendislik özellikleri için önemli bir paremetre olan süreksizliklerin aralıkları ve açıklıklarının tespitinde görüntü işleme ve analizi metotlarının uygulanabilirliği araştırılmıştır. Ayrıca konuyla ilgili yapılan çalışmalar hakkında bilgi verilmiş, görüntü zenginleştirme ve analizi metotlarının temel ilkeleri ile kaya kütleleri görüntü özellikleri tanıtılmıştır. Araştırma kapsamında geliştirilen Kaya Görüntü Analizi (KGA) programında temel ilkeleri verilen görüntü analizi metotları uygulanmış ve örnek arazi uygulaması yapılmıştır.

🔖

Cite This Article

KARAKUŞ, D., ONUR, A. H. (2022). Investigation of determination of rock mass properties by image processing methods. Geosound, Cilt: 0 - Sayı: 48-49, 237–255. https://ajindex.com/articles/524856

References (12)

  1. Bieniawski, Z.,T., 1989,
  2. Engineering Rock Mass Classification, Wiley, New York, USA, 25 Crosta, G., 1997, Evaluating rock mass geometry from photographic images, Rock Mech Rock Eng,30(1), 35-58
  3. Gonzalez, C., R., Woods, E., R., 1993,
  4. Digital Image Processing, Addison -Wesley Publishing Company, USA, 417 Gaich, A., Pötsch, M., Schubert, W.,2005, Basics, principles and application of 3D imaging systemswith conventional and high-resolution cameras, American Rock Mechanics Association Hadjigeorgiou, J., Lemy, F., Cote, P., Maldague, X., 2003, An evaluation of image analysis algorithms for constructing discontinuity trace maps, Rock Mechanics and Rock Engineering, Springer-Verlag, 36(2), 163-179. Hudson J. A., 1989, Rock Mechanis Principles in Rock Engineering Practice". Butterworts. Jennings, J. E., 1970, A mathematical theory for the calculation of the stability of slopes in open cast mines, Proc. Symp. On Planning Opne Pit Mines, Cape Town, Balkema, 87-102. ISRM, 1981, ISRM Suggested Methods: Rock Characterization, Testing and Monitoring" Pergamon Press Kemeny, J., Post, R., 2003, Estimating three-dimensional rockdiscontinuity orientation from digital images of fracture traces. Computers & Geosciences, 29, 65-77.
  5. Lemy, F., Hadjigeorgiou, J., 2003, Discontinuity trace map construction using photographs of rock exposures, International Journal of Rock Mechanics & Mining Sciences, 40, 903-917.
  6. Lindqvist, J., E., Akesson, U., 2001, Image analysis applied to engineering geology, a literature review, Bui. Eng. Geol.Env., 60,117-122.
  7. Maerz, N., 1990, Photoanalysis of rock fabric. PhD thesis, University of Waterloo, Canada, Nelson, R. A., 1985, Geological Analysis of Naturally Fractured Reservoirs. Buttenworth-Heinemann Publishers,
  8. Woburn. Nicholas, D.,E., Sims, D.,B., 2001, Collecting and using geologic structure data for slope design, In: Hustrulid, W A., McCarter, M.K., Van Zyl, D.J.A. (Eds.), Slope Stability n Surface Mining. SME, Littleton, CO, 11-26.
  9. Piteau, D.R., 1970, Geological factors significant to the stability of slopes cut in rock. Proc. Symp. on Planning Open Pit Mines, Cape Town, Balkema, 33-53
  10. Priest, S. D., 1993, Discontinuity Analysis for Rock Engineering, Chapman & Hall, London, 473. Priest S. D., Hudson J. A., 1976,
  11. Discontinutiy Spacing in Rock, International Journal of Rock Mechanics and Mining Sciences and Geomechanics, 13, 135-148
  12. Priest, S. D., Hudson, J. A., 1981, Estimation of discontinuity spacing and trace length using scanline surveys