Journals / Geosound / 2006 / Cilt: 0 - Sayı: 48-49

Yüksek fırında demir cevherlerinin kullanılma kriterleri

Criteria for use of iron ores in blast furnaces

Journal
Geosound
Pages
1–11
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Similarly, sintering of these ores was also studied and finally suitability was assessed as a triple mixture of lump ore + pellet + sinter instead of lump ore sintered material only.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the usage and suitability of individual iron ores depending on their quality parameter have been investigated theoretically by the application of Flint's effective carbon rate formula to some actual plant operating conditions.
📊
Key Findings & Data:In this study, the usage and suitability of individual iron ores depending on their quality parameter have been investigated theoretically by the application of Flint's effective carbon rate formula to some actual plant operating conditions.
💡
Conclusion & Impact:Similarly, sintering of these ores was also studied and finally suitability was assessed as a triple mixture of lump ore + pellet + sinter instead of lump ore sintered material only.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the usage and suitability of individual iron ores depending on their quality parameter have been investigated theoretically by the application of Flint's effective carbon rate formula to some actual plant operating conditions. Similarly, sintering of these ores was also studied and finally suitability was assessed as a triple mixture of lump ore + pellet + sinter instead of lump ore sintered material only.

Özet

Bu çalışmada, bazı fiili tesis sonuçları kullanılarak, Flint'in Efektif Karbon Oranı formülü yardımıyla demir cevherlerinin kalite parametreleri üzerinden yüksek fırın için uygunluğu ve kullanılabilirliği araştırılmıştır. Benzer şekilde bu cevherlerin sinterlenerek kullanımı da incelenmiş ve son olarak cevherin tek başına parça veya sinterlenmiş olarak kullanımı yerine üçlü karışımda, parça cevher+sinter+pellet olarak uygunluğu araştırılmıştır.

🔖

Cite This Article

TANRIVERDİ, M., ARSLAN, V. (2022). Yüksek fırında demir cevherlerinin kullanılma kriterleri. Geosound, Cilt: 0 - Sayı: 48-49, 1–11. https://ajindex.com/articles/524854

References (4)

  1. Flint, R.V., 1962. Effect of Burden Materials and Practices on Blast Furnace Coke Rate, Blast-Furnace and Steel Plant. (Paper presented at Chicago Regional Technical Meeting of American Iron and Steel Institute, September 27,1961).
  2. Griffen, J., 1954. The Cost Effects in Basic Iron Blast-Furnace Practice of Ash and Sulphur Levels of Coke, Island Creek Coal Sales Company, Huntington, West Virginia. TDCI, Iron and Steel Company of Turkey, Annual Report, 1988,
  3. Ankara,
  4. Turkey. Hayness, D., Hill, B., 1988. Development in Sintering Technology at Apple by Frodingham, Iron Making Conference. Ricketts, J.A., 1988. Statistical Process Control in Iron Production, the Development of Blast-Furnace Operating Guidelines, Iron Making Conference. Belyshow, O.N., et. all., 1985. Effect of Coke Strength on Blast-Furnace Performance, Metallurgist (USSR), Fuel, Moscow.