Journals / Geosound / 2008 / Cilt: 0 - Sayı: 52

Kuru mekanokimyasal olarak selestitin ($SrSO_4$) stronsiyum karbonata doğrudan dönüşümü

Direct conversion of celestite ($SrSO_4$) to strontium carbonate by dry mechanochemical processing

Journal
Geosound
Pages
55–63
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The order of conversion is proportional to 1.22 power of $Na_2CO_3/SrSO_4$ ratio $([Na_2CO_3/SrSO_4]^122)$.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:ABSTRACT: In this ,study, direct conversion of celestite ($SrSO_4$) to strontium carbonate by dry mechançchemical processing was kinetically studied.
📊
Key Findings & Data:Complete conversion of celestite to strontium carbonate was never achieved by dry processing even in 10 h of milling.
💡
Conclusion & Impact:The order of conversion is proportional to 1.22 power of $Na_2CO_3/SrSO_4$ ratio $([Na_2CO_3/SrSO_4]^122)$.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

ABSTRACT: In this ,study, direct conversion of celestite ($SrSO_4$) to strontium carbonate by dry mechançchemical processing was kinetically studied. The resulting conversion-time curves were evaluated using different kinetic models based on the diffusion through the product phases in the solid-state. Complete conversion of celestite to strontium carbonate was never achieved by dry processing even in 10 h of milling. When 50% excess sodium carbonate was used, apparent rate constant is 0.00025 min~l. The order of conversion is proportional to 1.22 power of $Na_2CO_3/SrSO_4$ ratio $([Na_2CO_3/SrSO_4]^122)$.

Özet

Bu çalışmada, selestitin ($SrSO_4$) kuru mekanokimyasal süreçlerle doğrudan stronsiyum karbonata dönüşümü kinetik olarak incelenmiştir. Elde edilen dönüşüm-süre eğrileri katı haldeki ürün fazından difüzyon temeline dayalı farklı kinetik modeller kullanılarak değerlendirilmiştir. Kuru olarak selestitin tamamıyla stronsiyum karbonata dönüşümü 10 saatlik öğütmeyle bile sağlanamamıştır. %50 fazla sodyum karbonat kullanıldığı durumda görünür hız sabiti 0.00025 dak.-1'dır. Dönüşüm derecesi $Na_2CO_3/SrSO_4$ oranının 1,22. kuvvetiyle $([Na_2CO_3/SrSO_4]^122)$ orantılıdır.

🔖

Cite This Article

ERDEMOĞLU, M. (2022). Kuru mekanokimyasal olarak selestitin ($SrSO_4$) stronsiyum karbonata doğrudan dönüşümü. Geosound, Cilt: 0 - Sayı: 52, 55–63. https://ajindex.com/articles/524832

References (12)

  1. Aydoğan, S., Erdemoğlu, M., Aras, A., Uçar, G., Özkan, A. 2006. Dissolution kinetics of celestite (SrSO4) in HCl solution with BaCl2. Hydrometallurgy 84, 239-246. Balâz, P., 2003. Mechanical activation in hydrometallurgy. International Journal of Mineral Processing 72, 341-354. Balâz, P., Alâcova, A., Achimovicovâ, M., Ficeriovâ, J., Godocîkovâ, E. 2005. Mechanochemistry in Hydrometllurgy of sulphide minerals. Hydrometallurgy 77, 9-17.
  2. Boldyrev, V.V. 2004. Ten years after the first international conference on mechanochemistry and mechanical alloying; where we are now? Journal of Materials Science 39,4985-4986.
  3. Botta, P.M., Aglietti, E.F., Porto Lopez J.M. 2006. Kinetic study ofZnFe2Ö4 formation from mechanochemically activated Zn-Fe2O3 mixtures. Materials Research Bulletin 41,714-723.
  4. Castillejos, A.H., delaCruz, F.P., Uribe, A. 1996. The direct conversion of celestite to strontium carbonate in sodium carbonate aqueous media. Hydrometallurgy 40, 207-222.
  5. Erdemoğlu, M., Canbazoğlu, M. 1998. The leaching of SrS with water and the precipitation of SrCOj from leach solution by different carbonating agents. Hydrometallurgy 49,135-150.
  6. Erdemoğlu, M., Sarıkaya, M., Canbazoğlu, M. 2006. Leaching of celestite with sodium sulphide. Journal of Dispersion Science and Technology 27, 439-442.
  7. Erdemoğlu, M., Aydoğan, S., Canbazoğlu, M. 2007. A kinetic study on the conversion of celestite (SrSOj,) to SrCOj by mechanochemical processing. Hydrometallurgy 86,1-5.Gutman. E.M. 1994. Mechanochemistry of solid surfaces. World Scientific Publishing Co., Singapore. Habashi, F. 1999. Kinetics of Metallurgical Processes. Metallurgie Extractive Quebec, Quebec, Canada. Juhâsz, A.Z. 1998. Aspects of mechanochemical activation in terms of comminution theory. Colloids and Surfaces A:Phsicocheical and Engineering Aspects 141,449-462.
  8. Iwai, M., Toguri, J.M. 1989. The leaching of celestite in sodium-carbonate solution. Hydrometallurgy 22,87-100.
  9. McCormick, P.G., Froes, F.H. 1998.The fundamentals of mechanochemical processing. JOM 50(11), 61-65.
  10. Obut, A., Balâz, P., Girgin, İ., 2006. Direct mechanochemical conversion of celestite to SrCOj. Minerals Engineering 19,1185-1190.
  11. Owusu, G., Litz, J.E. 2000. Water leaching of SrS and precipitation of SrCO3 using carbon dioxide as the precipitating agent. Hydrometallurgy 57, 23-29.
  12. Perez-Maqueda, L.A., Sanchez-Jimenez, P.E., Criado, J. M. 2005. Kinetic analysis of solid-state reactions: precision of the activation energy calculated by integral metho