Journals / Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2002 / Cilt: 15 - Sayı: 2

A model for silicate injection into soil

Silikatlı bileşiklerin zemine enjeksiyonu için bir model

Pages
525–534
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this paper, silicate grout injection into soil is examined and two-dimensional numerical model that simulates the two-phase immiscible flow in a porous media is developed and the model is tested by two numerical simulations.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Injection is the process of filling the fissures and pores to make the injection zone impermeable, increase its strength by injecting cement, asphalt and chemical gels.
📊
Key Findings & Data:Injection is the process of filling the fissures and pores to make the injection zone impermeable, increase its strength by injecting cement, asphalt and chemical gels.
💡
Conclusion & Impact:In this paper, silicate grout injection into soil is examined and two-dimensional numerical model that simulates the two-phase immiscible flow in a porous media is developed and the model is tested by two numerical simulations.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Injection is the process of filling the fissures and pores to make the injection zone impermeable, increase its strength by injecting cement, asphalt and chemical gels. In this paper, silicate grout injection into soil is examined and two-dimensional numerical model that simulates the two-phase immiscible flow in a porous media is developed and the model is tested by two numerical simulations.

Özet

Enjeksiyon, çimento, asfalt ve kimyasal gibi maddelerin zemine enjekte edilmesiyle çatlak ve/veya boşlukları tıkayarak, enjeksiyon yapılan bölgeyi geçirimsiz kılma, mukavemetini arttırma işlemidir. Bu çalışmada zemin bünyesine yapılan kimyasal madde enjeksiyonu incelenmiştir. Silikatlı enjeksiyon maddesinin, suya doygun zemin içindeki yayılımının simülasyonunu yapan, iki boyutlu sayısal bir model geliştirilmiş, modelin uygulaması iki sayısal örnek ile anlatılmıştır.

🔖

Cite This Article

ÖZDEMİR, O. N., YILDIZ, F. E. (2022). A model for silicate injection into soil. Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 15 - Sayı: 2, 525–534. https://ajindex.com/articles/522338

References (1)

  1. Karol, R.H., "Chemical grouting technology", Journal of the Soil Mechanics and Foundation Division, ASCE, 94 (SMI), 175-204 (1968). 2)Bader, T.A., "Injection and distribution of silicate grout in sand", Ph.D. thesis, Northwestern University, Evanston, Illinois, USA (1981). 3)Krizek, R.J. and Perez, T., "Chemical grouting in soils permeated by water", Journal of Geotechnical Engineering, 111 (7), 898-915 (1985). 4)Kleyner, I., Krizek, R.J., "Mathematical model for bore-injected cement grout installations", Journal of Geotechnical Engineering, 121 (11), 782-788, (1995). 5)Elmalı, H., "Simulation of grouting in one dimension", M.Sc. thesis, Faculty of engineering, METU, Ankara, (1999). 6)Abriola, L.M. and Pinder, G.F., "A multiphase approach to the modeling of porous media contamination by organic compounds: 1. Equation developed", Water Resources Research, 21 (1), 11-18, (1985 a). 7)Abriola, L.M. and Pinder, G.F., "A multiphase approach to the modeling of porous media contamination by organic compounds:2. Numerical simulation", Water Resources Research, 21 (1), 19-26 (1985 b). 8(Faust, C.R., "Transport of immiscible fluids within and below the unsaturated zone: A numerical model", Water Resources Research, 21 (4), 587-596 (1985). 9)Osborne, M., and Sykes, J., "Numerical modeling of immiscible organic transport at the Hyde Park Landfill", Water Resources Research, 22 (1),1727-1736, (1986). 10)Kuppasamy, T., Sheng J., Parker, J.C., Lenhard R.J., "Finite-element analysis of multiphase immiscible flow through soils", Water Resources Research, 23(4), 625-631,(1987). 11)Lenhard, R.J., Parker, J.C., Kaluarachchi, J.J., "A model for hysteretic constitutive relations governing multiphase flow: 3. Refinements and numerical simulations", Water Resources Research, 25 (7), 1727-1736, (1989). 12)Kaluarachchi, J.J. and Parker, J.C., "An efficient finite element method for modeling multiphase flow", Water Resources Research, 25 (1), 43-54, (1989). 13)Faust, C.R., Guswa, J.H., Mercer, J.W., "Simulation of three-dimensional flow of immiscible fluids within and below the unsaturated zone", Water Resources Research, 25 (12), 2449-2464, (198-9). 14) Kueper, B.H. and Frind, E.O., "Two-phase flow in heterogeneous porous media: Model development", Water Resources Research, 27 (6), 1049-1057, (1991a). 15)Kueper, B.H. and Frind, E.O., "Two-phase flow in heterogeneous porous media: 2. Model application, Water Resources Research, 27 (6), 1059-1070, (1991b). 16)Yıldız, F. E., "Toprak