Journals / Teknik Dergi / 2014 / Cilt: 25 - Sayı: 122

Examination of Relationships Between Menard Pressuremeter, Standard Penetration and Laboratory Tests Data on The Silty Soil (Kastamonu, Turkey)

Silt Biriminde (Kastamonu, Türkiye) Yapılan Menard Presiyometre, Standart Penetrasyon ve Laboratuvar Deney Sonuçları Arasındaki İlişkilerin Araştırılması

Pages
—
Publication Date
2014-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Equations were derived with regression analyses which yielded high coefficients of correlation

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Examination of Relationships Between Menard Pressuremeter, Standard Penetration and Laboratory Tests Data on The Silty Soil (Kastamonu, Turkey) Determining the deformation characteristics of soils is one of the most important parameters of geotechnical designs.
📊
Key Findings & Data:Since the laboratory tests could not represents soil masses and obtaining reliable specimens is expensive, various in-situ tests have been developed.
💡
Conclusion & Impact:Equations were derived with regression analyses which yielded high coefficients of correlation
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Menard presiyometre testi · standart penetrasyon testi · laboratuvar testi

Abstract

Examination of Relationships Between Menard Pressuremeter, Standard Penetration and Laboratory Tests Data on The Silty Soil (Kastamonu, Turkey) Determining the deformation characteristics of soils is one of the most important parameters of geotechnical designs. Since the laboratory tests could not represents soil masses and obtaining reliable specimens is expensive, various in-situ tests have been developed. Menard pressuremeter test gives realistic results, but it requires excessive time, cost and experience. Hence, cheaper methods are needed to obtain parameters indirectly. In this study correlations between Menard pressuremeter, standard penetration and some laboratory tests data are investigated during a research conducted for the sandy silt in Kastamonu. Equations were derived with regression analyses which yielded high coefficients of correlation

Özet

Zeminlerin deformasyon özelliklerinin belirlenmesi geoteknik tasarımların en önemli unsurlarındandır. Laboratuvar testlerinin zemin kütlelerini yeterince temsil edememesi, güvenilirlerin ise pahalı olması çeşitli arazi deneylerin geliştirilmesini sağlamıştır. Menard presiyometre testi geoteknik incelemelerde oldukça doğru sonuçlar vermesinin yanında fazla zaman, maliyet ve tecrübe gerektirmektedir. Bu nedenle bu parametrelere daha ucuz yöntemlerle ve deneysel denklemlerle ulaşmak ihtiyacı doğmaktadır. Bu çalışmada Kastamonu’da yürütülen bir incelemede kumlu siltlerde elde edilen Menard presiyometre, standart penetrasyon ve bazı laboratuvar test verileri arasındaki korelasyonlar incelenmiş, regresyon analizleri yapılmış, determinasyon katsayıları yüksek denklemler elde edilmiştir

🔖

Cite This Article

AĞAN, C. (2014). Examination of Relationships Between Menard Pressuremeter, Standard Penetration and Laboratory Tests Data on The Silty Soil (Kastamonu, Turkey). Teknik Dergi, Cilt: 25 - Sayı: 122. https://ajindex.com/articles/51359

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Mair R.J., Wood D.M., Pressuremeter testing methods and interpretation, CIRIA, ISSN:0-408-02434-8, 1987.
  2. Isik N.S., Doyuran V., Ulusay R., Assessment of Deformation Modulus of weak rock masses from Pressuremeter Tests and seismic surveys. Bull Eng Geol Environ 67, s 293–303, 2008.
  3. Isik N.S., Ulusay R., Doyuran V., Deformation Modulus of heavily jointed-sheared and block greywackes by Pressuremeter Tests: Numerical, experimental and empirical assessments. Eng Geol 101, s 269–282, 2008.
  4. Lashkaripour R.G., Ajalloeian R., Determination of silica sand stiffness, Engineering Geology 68, 2003.
  5. Kayabasi A., Gokceoglu C., Ercanoglu M., Estimating the deformation modulus of rock masses: a comparative study, Int J Rock Mech Min Sci 40 (1), s 55-63, 2003.
  6. Gokceoglu C., Sonmez H., Kayabasi A., Predicting deformation moduli of rock masses, Int J Rock Mech Min Sci 41 (2), s 337-341, 2003.
  7. Sonmez H., Gokceoglu C., Nefeslioglu H.A., Kayabasi A., Estimation of rock modulus, Int J Rock Mech Min Sci 43 (2), s 224-235, 2006.
  8. Sharma P.K., Singh T.N., A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial strength index, Bull Eng Geol Environ 67, s Hobbs N.B., Dixon J.C., In situ testing for bridge foundations in the devonian marl, Proceedings of the conference on in situ investigations in soils and rocks, British Geotechnical Society, London, May 13-15, s 31–38, 1969.
  9. Baguelin F., Jezequel J.F., Shields D.H., The Pressuremeter and foundation engineering, Trans Tech Publications, 1978.
  10. Kulhawy F.H., Mayne P.W., Manual on estimating soil properties for foundation design, Electic Power Research Institute, Palo Alto, 1990.
  11. Akca N., Correlation of SPT–CPT data from the United Arab Emirates, Eng Geol 67 (3/4), s 219–231, 2003.
  12. Hasancebi N., Ulusay R., Empirical correlations between shear wave velocity and penetration resistance for ground shaking assessments. Bull Eng Geol Environ 66, s 203–213, 2007.
  13. Windle D., Wroth C.P., The use of a self boring pressuremeter to determine the undrained properties of clays, Ground Engineering 10 (6), s 37–46, 1997.
  14. Arulrajah A., Nikraz H., Bo M.W., In-situ testing of Singapore marine clay at Changi, Geotech Geol Eng 23, s 111–130, 2005.
  15. Ohya S., Imai T., Matsubara M., Relationship between N value by SPT and LLT Pressuremeter Results, Proceedings, 2. European symposium on penetration testing 1, s 125–130, 1982.
  16. Gonin H., Vandangeon P., Lafeullade M.P., Correlation study between standard penetration and Pres