SavedAdd your journal

Journals / European Mechanical Science / 2021 / Cilt: 5 - Sayı: 3

Static Analysis of Trailers with Demountable Chassis

Banu ÖZKESER
Tuğba GEDİK
Mehmet VURGUN
Erhan BİÇER
Pages
130–134
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is concluded that the deformation of the chassis under these loads is at an acceptable level.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Today, trailers are the most used vehicles in intercity and international road transport.
📊
Key Findings & Data:There are serious difficulties in the production processes and post-production shipments of these vehicles.
💡
Conclusion & Impact:It is concluded that the deformation of the chassis under these loads is at an acceptable level.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Trailer · Finite Element Method · Demountable Chassis

Abstract

Today, trailers are the most used vehicles in intercity and international road transport. There are serious difficulties in the production processes and post-production shipments of these vehicles. Trailer chassis are generally produced in welded structures. In this study, the trailer chassis produced in welded structure was transformed into a bolted structure. A nonlinear finite element model was created and static analyzes of the demountable chassis trailer have been made. In these analyzes, stress and deformation data on the chassis part of the trailer were observed. It is concluded that the deformation of the chassis under these loads is at an acceptable level. As a result, it has been shown that welded structures in trailer chassis can be transformed into bolted structures and there is no problem in terms of safety.

🔖

Cite This Article

ÖZKESER, B., GEDİK, T., VURGUN, M., BİÇER, E. (2022). Static Analysis of Trailers with Demountable Chassis. European Mechanical Science, Cilt: 5 - Sayı: 3, 130–134. https://ajindex.com/articles/512415

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Al., T.F.L. et., (1992). Member Stiffness and Bolt Spacing of Bolted Joints. Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim: Winter Annual Meeting of the American Society of Mechanical Engineers p. 63–72
  2. Dundar, K., Ozkan, M.T., (2005). Civatalı Bağlantıların Eleman Direngenliğin Sonlu Elemanlar Yöntemi Ve Yapay Sinir Ağları Sistemi İle Belirlenmesi. Teknoloji. 8(1): 33–41
  3. Shigley, J.E., Mitchell, L.D., (1983). “Bolted Joint”, Mechanical engineering design. Newyork: McGraw Hill Inc
  4. Lehnhoff, T.F., Ko, K. Il., McKay, M.L., (1994). Member Stiffness and Contact Pressure Distribution of Bolted Joints. Journal of Mechanical Design. 116(2): 550–7. doi: 10.1115/1.2919413
  5. Wileman, J., Choudhury, M., Green, I., (1991). Computation of member stiffness in bolted connections. Journal of Mechanical Design, Transactions of the ASME. 113(4): 432–7. doi: 10.1115/1.2912801
  6. Akkurt, M., (1986). “Civata bağlantıları”, Makina elemanları”. İstanbul: Birsen Kitabevi
  7. Filiz, İ., H., Akbolat, A., Güzelbey, İ.H., (1996). Stiffness of bolted members. Turkish Journal of Engineering and Environmental Sciences. 20: 273–9
  8. Englund, R.B., Johnson, D.H., (1997). Finite element analysis of a threaded connection compared to experimental and theoretical research. Journal of Engineering Technology. 14(2): 42–7
  9. Ibrahim, R.A., Pettit, C.L., (2005). Uncertainties and dynamic problems of bolted joints and other fasteners. Journal of Sound and Vibration. 279(3–5): 857–936. doi: 10.1016/j.jsv.2003.11.064
  10. Olsson, J., Sandlund, P., (2008). Form the Design Basis for Screw Joints. Lulea University of Technology, (2008)
  11. Oldfield, M., Ouyang, H., Mottershead, J.E., (2005). Simplified models of bolted joints under harmonic loading. Computers and Structures. 84(1–2): 25–33. doi: 10.1016/j.compstruc.2005.09.007
  12. Ouyang, H., Oldfield, M.J., Mottershead, J.E., (2006). Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load. International Journal of Mechanical Sciences. 48(12): 1447–55. doi: 10.1016/j.ijmecsci.2006.07.015
  13. Jiang, Y., Zhang, M., Lee, C.H., (2003). A study of early stage self-loosening of bolted joints. Journal of Mechanical Design, Transactions of the ASME. 125(3): 518–26. doi: 10.1115/1.1586936
  14. Karim, Y., Blanzé, C., (2014). Vibration reduction of a structure by design and control of a bolted joint. Computers and Structures. 138: 73–85. doi: 10.1016/j.compstr