Journals / European Mechanical Science / 2021 / Cilt: 5 - Sayı: 1

Numerical Study on Solidification of Phase Change Materials Embedded with Metal Foam

Pages
1–5
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that at the case where the porosity ε =0.92, the elapsed time for complete solidification is decreases by 88% compared to the case without MF (ε =1.0).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This work investigates the solidification of phase change material (PCM) embedded with metal foam (MF) in a spherical capsule which its outer layer is exposed to convective heat transfer.
📊
Key Findings & Data:Four separate scenarios are developed for different porosity value of MF in order to analyze the thermal behavior of composite PCM with MF.
💡
Conclusion & Impact:The results show that at the case where the porosity ε =0.92, the elapsed time for complete solidification is decreases by 88% compared to the case without MF (ε =1.0).
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Control volume approach · Phase change material · Metal foam

Abstract

This work investigates the solidification of phase change material (PCM) embedded with metal foam (MF) in a spherical capsule which its outer layer is exposed to convective heat transfer. The one-dimensional energy equation is resolved by performing finite volume method accompanied with temperature transforming technique. Four separate scenarios are developed for different porosity value of MF in order to analyze the thermal behavior of composite PCM with MF. The numerical model is validated by experimental data taken from the literature and substantially good agreement is demonstrated. The results show that at the case where the porosity ε =0.92, the elapsed time for complete solidification is decreases by 88% compared to the case without MF (ε =1.0).

🔖

Cite This Article

Asker, M., Genceli, H. (2022). Numerical Study on Solidification of Phase Change Materials Embedded with Metal Foam. European Mechanical Science, Cilt: 5 - Sayı: 1, 1–5. https://ajindex.com/articles/512405

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Dincer I., Rosen, M.A. (2011). Thermal Energy Storage Systems and Applications. 2nd ed., Wiley, New York. Dincer, I., Ezan M.A. (2018). Heat Storage: A Unique Solution for Energy Systems. 1st ed. Springer, Switzerland. Regin, A. F., Solanki, S.C., Saini, J.S. (2017). Heat transfer characteristics of thermal energy storage system using PCM capsules: A review. Renewable and Sustainable Energy Reviews, 12(9): 2438-2458, DOI: 10.1016/j.rser.2007.06.009. Koohi-Fayegh, S., Rosen, M.A. (2020). A review of energy storage types, applications and recent developments. Journal of Energy Storage, 27: 101047, DOI: 10.1016/j.est.2019.101047. Kenisarin, M.M., Mahkamov, K., Costa, S.C., Makhkamova, I. (2020). Melting and solidification of PCMs inside a spherical capsule: A critical review. Journal of Energy Storage, 27: 101082, DOI: 10.1016/j.est.2019.101082. Pedroso, R.I., Domoto, G.A. (1973). Perturbation solutions for spherical solidification of saturated liquids. Journal of Heat Transfer, 95 (1): 42-46, DOI: 10.1115/1.3450002. Tao, L.C. (1967). Generalized numerical solutions of freezing a saturated liquid in cylinders and spheres. AIChE Journal, 13 (1): 165–169, DOI:10.1002/aic.690130130. Bilir, L., Ilken, Z. (2005). Total solidification time of a liquid phase change material enclosed in cylindrical/spherical containers. Applied Thermal Engineering, 25(10):1488-1502, DOI:10.1016/j.applthermaleng.2004.10.005. Erek, A., Dincer, I. (2009). Numerical heat transfer analysis of encapsulated ice thermal energy storage system with variable heat transfer coefficient in downstream. International Journal of Heat and Mass Transfer, 52(3-4): 851-859, DOI:10.1016/j.ijheatmasstransfer.2008.06.024. Gharebaghi, M., Sezai, I. (2007). Enhancement of Heat Transfer in Latent Heat Storage Modules with Internal Fins. Numerical Heat Transfer, Part A: Applications, 53(7): 749–765, DOI:10.1080/10407780701715786. Asker, M., Alptekin E., Ezan M.A., Ganjehsarabi H. (2018). Entropy generation analysis of multilayer PCM slabs integrated with fins. International Journal of Exergy, 26(1-2): 154–169, DOI: 10.1504/IJEX.2018.092511. Sari, A., Karaipekli, A. (2007). Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material. Applied Thermal Engineering, 27(8-9): 1271–1277, DOI: 10.1016/j.applthermaleng.2006.11.004. Narasimhan, N. L., Veeraraghavan, V., Ramanathan, G., Bharadwaj, B. S., Thamilmani, M. (2018). Studies on the