SavedAdd your journal

Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2020 / Cilt: 8 - Sayı: 3

Sıkma Kuvveti Uygulamadan Değişken Şekilli Yumuşak Dokuların Kavranması İçin Yeni Bir Laparoskopik Tutucu Tasarımı ve Uygulanabilirlik Testleri

Design and Feasibility Tests of A New Laparoscopic Gripper for Grasping Soft Tissues of Variable Shape Without Clamping Force

Şenol ERTÜRK
Fehmi ERZİNCANLI
Pages
2084–2091
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Bu tutucuların kavrama çeneleri, dokuların kaymaması için değişik yapılarda dişli yapıya

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Cerrahlar, Laparoskopik cerrahi sırasında yumuşak dokuları tutmak ve hareket ettirmek için tutucular kullanmaktadır.
📊
Key Findings & Data:Cerrahlar, Laparoskopik cerrahi sırasında yumuşak dokuları tutmak ve hareket ettirmek için tutucular kullanmaktadır.
💡
Conclusion & Impact:Bu tutucuların kavrama çeneleri, dokuların kaymaması için değişik yapılarda dişli yapıya
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Laparoscopic gripper · Bernoulli principle · Minimally invasive surgery

Abstract

Cerrahlar, Laparoskopik cerrahi sırasında yumuşak dokuları tutmak ve hareket ettirmek için tutucular kullanmaktadır. Bu tutucuların kavrama çeneleri, dokuların kaymaması için değişik yapılarda dişli yapıya

Özet

Surgeons use grippers for grasping and moving soft tissues during Laparoscopic surgery. The grasping jaws of these grippers have different toothed structures to prevent tissues from slipping. As a result of clamping tissues between grasping jaws, there is a risk of tissue damage. In this study, to eliminate this risk, a new Laparoscopic gripper that works on the Bernoulli principle and can lift tissues without clamping force was designed and produced, and its applicability tests were carried out with an experimental study. The gripper works by creating a vacuum with a high air flow rate with the Bernoulli principle between itself and the tissue. To not damage the lifted tissue by the strong air jet, a deflector was placed onto the center of the grasping surface to change the flowing direction of the air flowing in the axial direction. The study showed that a gripper working with the Bernoulli principle can be applicable to lift and move soft and flexible tissues without clamping force.

🔖

Cite This Article

ERTÜRK, Ş., ERZİNCANLI, F. (2022). Sıkma Kuvveti Uygulamadan Değişken Şekilli Yumuşak Dokuların Kavranması İçin Yeni Bir Laparoskopik Tutucu Tasarımı ve Uygulanabilirlik Testleri. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 8 - Sayı: 3, 2084–2091. https://ajindex.com/articles/494137

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. D. D. Marucci, J. A. Cartmill, W. R. Walsh, and C. J. Martin, “Patterns of Failure at the Instrument–Tissue Interface,” Journal of Surgical Research, vol. 93, no. 1, pp. 16–20, 2000
  2. A. J. Shakeshaft, J. A. Cartmill, W. R. Walsh, and C. J. Martin, “A Curved Edge Moderates High Pressure Generated by A Laparoscopic Grasper,” Surgical. Endoscopy, vol. 15, no. 10, pp. 1232–1234, 2001
  3. J. Rosen, B. Hannaford, C. G. Richards, and M. N. Sinanan, “Markov Modeling of Minimally Invasive Surgery Based on Tool/Tissue Interaction and Force/Torque Signatures for Evaluating Surgical Skills,” IEEE Transactions on Biomedical Engineering, vol. 48, no. 5, pp. 579–591, 2001
  4. T. Hu, G. Tholey, J. P. Desai, and A. E. Castellanos, “Evaluation of A Laparoscopic Grasper with Force Feedback,” Surgical Endoscopy, vol. 18, no. 5, pp. 863– 867, 2004
  5. J. Wang, L. Ma, W. Li, and Z. Zhou, “Safety of Laparoscopic Graspers with Different Configurations During Liver Tissue Clamping,” Biosurface and Biotribology, vol. 4, no. 2, pp. 50–57, 2018
  6. J. A. Cartmill, A. J. Shakeshaft, W. R. Walsh, and C. J. Martin, “High Pressures are Generated at the Tip of Laparoscopic Graspers,” Australian and New Zealand Journal of Surgery, vol. 69, no. 2, pp. 127–130, 1999
  7. E. A. M. Heijnsdijk, M. Van Der Voort, H. De Visser, J. Dankelman, and D. J. Gouma, “Inter-and Intraindividual Variabilities of Perforation Forces of Human and Pig Bowel Tissue,” Surgical Endoscopy and Other Interventional Techniques, vol. 17, no. 12, pp. 1923–1926, 2003
  8. X. F. Brun and. N. Melkote, “Analysis of Stresses and Breakage of Crystalline Silicon Wafers During Handling and Transport,” Solar Energy Materials Solar Cells, vol. 93, no. 8, pp. 1238–1247, 2009
  9. B. Ozcelik and F. Erzincanli, “A Non-Contact End-Effector for the Handling of Garments,” Robotica, vol. 20, no. 4, pp. 447–450, 2002
  10. B. Ozcelik and F. Erzincanli, “Examination of the Movement of A Woven Fabric in the Horizontal Direction Using A Non-Contact End-Effector,” International Journal of Advanced Manufacturing Technology, vol. 25, no. 5, pp. 527–532, 2005
  11. F. Erzincanli, J. M. Sharp, and A. M. Dore, “Grippers for Handling of Flexible Food Products,” in Proceeding of EURISCON’94, Malaga, Spain: Amarc, vol. 3, pp. 798–806, 1994
  12. S. Davis, J. O. Gray and G. G. Caldwell “An End Effector Based on the Bernoulli Principle for Handling Sliced Fruit and Vegetables,” Robotics Computer Integrated Manufacturing, vol. 24, no. 2, pp