Journals / Cumhuriyet Dental Journal / 2014 / Cilt: 17 - Sayı: 1

Fracture strength of endodontically treated roots restored with zirconia post and different core materials

Pages
27–31
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Data were analyzed using one-way analysis of variance and Tukey tests (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objectives: The aim of this study was to investigate the effect of different core materials on the fracture strength of endodontically treated roots.
📊
Key Findings & Data:A compressive load was applied on the lingual surface (2 mm below the incisal edge) at 45º angle and crosshead speed of 0.5 mm/min until a fracture occurred.
💡
Conclusion & Impact:Data were analyzed using one-way analysis of variance and Tukey tests (p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Objectives: The aim of this study was to investigate the effect of different core materials on the fracture strength of endodontically treated roots. Materials and Methods: Twenty-one (CAD/CAM zirconia post) posts were cemented to the central incisors with a resin cement (Rely X Unicem). After fabrication of core restorations (zirconia, resin core, resin composite), the metal crowns were fabricated on these cores and cemented with a polycarboxylate cement. Each specimen was embedded in an acrylic resin mold. A compressive load was applied on the lingual surface (2 mm below the incisal edge) at 45º angle and crosshead speed of 0.5 mm/min until a fracture occurred. Then fracture strength was measured using a universal testing machine. Data were analyzed using one-way analysis of variance and Tukey tests (p

🔖

Cite This Article

ERGUN, G., KAYA, B. M., ÇEKİÇ, I. N., EĞİLMEZ, F. (2022). Fracture strength of endodontically treated roots restored with zirconia post and different core materials. Cumhuriyet Dental Journal, Cilt: 17 - Sayı: 1, 27–31. https://ajindex.com/articles/477127

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Pfeiffer P, Schulz A, Nergiz I, Schmage P. Yield strength of zirconia and glass fibre-reinforced posts. J Oral Rehabil 2006;33:70-74
  2. Cekic-Nagas I, Canay S, Sahin E. Bonding of resin core materials to lithium disilicate ceramics: the effect of resin cement film thickness. Int J Prosthod 2010;23:469-471
  3. Aksornmuang J, Nakajima M, Senawongse P, Tagami J. Effects of C-factor and resin volume on the bonding to root canal with and without fibre post insertion. J Dent 2011;39:422-429
  4. Eisenburger M, Mache T, Borchers L, Stiesch M. Fracture stability of anterior zirconia crowns with different core designs and veneered using the layering or the press-over technique. Eur J Oral Sci 2011;119:253-257
  5. Balkenhol M, Rupf S, Laufersweiler I, Huber K, Hannig M. Failure analysis and survival rate of post and core restorations under cyclic loading. Int Endod J 2011;44:926- 937
  6. Cekic-Nagas I, Sukuroglu E, Canay S. Does the surface treatment affect the bond strength of various fibre- post systems to resin-core materials? J Dent 2011;39:171-179
  7. Kao EC. Fracture resistance of pin- retained amalgam, composite resin, and alloy-reinforced glass ionomer core materials. J Prosthet Dent 1991;66:463-471
  8. Ergun G, Egilmez F, Cekic-Nagas I. The effect of light curing units and modes on cytotoxicity of resin-core systems. Med Oral Patol Oral Cir Bucal 2010;15:e962–e968
  9. Heydecke G, Butz F, Hussein A, Strub JR. Fracture strength after dynamic loading of endodontically treated teeth restored with different post-and-core systems. J Prosthet Dent 2002;87:438-445
  10. Beck N, Graef F, Wichmann M, Karl M. In vitro fracture resistance of copy-milled zirconia ceramic posts. J Prosthet Dent 2010;103:40-44
  11. Vinothkumar TS, Kandaswamy D, Chanana P. CAD/CAM fabricated single-unit all-ceramic post-core- crown restoration. J Conserv Dent 2011;14:86-89
  12. Bittner N, Hill T, Randi A. Evaluation of a one-piece milled zirconia post and core with different post-and-core systems: An in vitro study. J Prosthet Dent 2010;103:369- 379
  13. Bakke M, Holm B, Jensen BL, Michler L, Möller E. Unilateral, isometric bite force in 8 68 year-old women and men related to occlusal factors. Scand J Dent Res 1990;98:149-158
  14. Zicari F, Van Meerbeek B, Scotti R, Naert I. Effect of fibre post length and adhesive strategy on fracture resistance of endodontically treated teeth after fatigue loading. J Dent 2012;40:312-321.