Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2020 / Cilt: 16 - Sayı: 4

Numerical Simulation on Balistic Performance of SiC/Light Metal Laminated Composite Armor against .30 APM2

Pages
409–418
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the simulations, among all the laminated armor systemsproviding full protection against “.30 APM2” ballistic threats with a collision speed of 878 m/s, the lowestareal density was determined as 54.245 kg/m2in 10 mm SiC/5 mm Ti6Al4V laminated composite armor.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Ceramic/metal laminated composite armor systems have great importance and potential in defencetechnology due to their high ballistic performance and lightweight.
📊
Key Findings & Data:In this study, it was aimed todetermine the ballistic performances, limits, and perforation types of light metals (with densities below5.0 g/cm3) used as ductile backing plates in laminated composite armor systems.
💡
Conclusion & Impact:As a result of the simulations, among all the laminated armor systemsproviding full protection against “.30 APM2” ballistic threats with a collision speed of 878 m/s, the lowestareal density was determined as 54.245 kg/m2in 10 mm SiC/5 mm Ti6Al4V laminated composite armor.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Ceramic/metal laminated composite armor systems have great importance and potential in defencetechnology due to their high ballistic performance and lightweight. In this study, it was aimed todetermine the ballistic performances, limits, and perforation types of light metals (with densities below5.0 g/cm3) used as ductile backing plates in laminated composite armor systems. In the numericalanalysis, SiC tiles of 5 and 10 mm thickness were used as the front layer. Al5083-H116, Mg AZ31B, andTi6Al4V light metal alloys in different thicknesses were used as the backing layer. While using theJohnson and Holmquist (JH-1) material model in SiC ceramic tiles, the Johnson-Cook (JC) materialmodel was applied for “.30 APM2” bullet components and metal layers. The analyzes were performedwith Ansys/Autodyn software. As a result of the simulations, among all the laminated armor systemsproviding full protection against “.30 APM2” ballistic threats with a collision speed of 878 m/s, the lowestareal density was determined as 54.245 kg/m2in 10 mm SiC/5 mm Ti6Al4V laminated composite armor.

🔖

Cite This Article

Kural, S., Ayvaz, M. (2022). Numerical Simulation on Balistic Performance of SiC/Light Metal Laminated Composite Armor against .30 APM2. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 16 - Sayı: 4, 409–418. https://ajindex.com/articles/472131

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. P.K. Jena, B. Mishra, K.S. Kumar, T.B. Bhat, An experimental study on the ballistic impact behavior of some metallic armour materials against 7.62 mm deformable projectile, Materials & Design. 31 (2010) 3308-3316.
  2. M.K. Forrestal, V.K. Luk, Perforation of aluminum armor plates with conical-nose projectiles. Mechanics of Materials. 10(1-2) (1990) 97-105. https://doi.org/10.1016/0167- 6636(90)90020-G 3. T. Borvik, A.H., Clausen, O.S., Hopperstad, Langseth, M., Perforation of AA5083-H116 aluminium plates with conicalnose steel projectiles—experimental study, International Journal of Impact Engineering. 30 (2004) 367-384.
  3. T. Borvik, M.J. Forrestal, O.S. Hopperstad, T.L. Warren, Langseth, M., Perforation of 5083-H116 aluminum plates with conical-nose steel projectiles-calculations, International Journal of Impact Engineering. 36 (2009) 426-437.
  4. T. Borvik, M.J. Forrestal, T.L. Warren, Perforation of 5083- H116 aluminum armor plates with ogive-nose rods and 7.62 mm APM2 bullets, Experimental Mechanics. 50 (2010) 969- 978.
  5. M.F. Abdullah, S. Abdullah, M.Z. Omar, Z. Sajuri, M. Sohaimi, Failure observation of the AZ31B magnesium alloy and the effect of lead addition content under ballistic impact, Advances in Mechanical Engineering. 7(5) (2015) 1-13.
  6. T.L. Jones, R.D. DeLorme, M.S. Burkins, W.A. Gooch, Ballistic performance of magnesium alloy AZ31B. 23rd International symposium on ballistics. 989-995, 16-20 April 2007, Tarragona, Spain
  7. J.S. Montgomery, M.G.H. Wells, B. Roopchand, J.W. Ogilvy, Low-cost titanium armors for combat vehicles, JOM. 49(5) (1997) 45-47.
  8. G. Sukumar, B.B. Singh, A. Bhattacharjee, K. Sivakumar, A.K. Gogia, Effect of heat treatment on mechanical properties and ballistic performance of Ti-4Al-2.3V-1.9Fe alloy, Materials Today. 2 (2015) 1102-1108.
  9. B.B. Singh, G. Sukumar, A. Bhattacharjee, K.S. Kumar, T.B. Bhar, A.K. Gogia, Effect of heat treatment on ballistic impact behavior of Ti–6Al–4V against 7.62 mm deformable projectile, Materials & Design. 36 (2012) 640-649.
  10. L.S. Gallo, M.O.C.V. Boas, A.C.M. Rodrigues, F.C.L. Melo, E.D. Zanotto, Transparent glass–ceramics for ballistic pr