Journals / Bor Dergisi / 2018 / Cilt: 3 - Sayı: 2

The nanobiocomposites synthesis from biomass and its characterization

Pages
93–102
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Nanobiocomposites containing lignocellulose and hBN may berecommended for use in polymer matrix structures where thermal properties needto be altered.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study was conducted to evaluate the suitability of using hexagonal boronnitride (hBN) as reinforcement in natural fibres obtained from hazelnut shell (F)and poppy straw (H).
📊
Key Findings & Data:The nanobiocomposite synthesiswas performed with 4% and 8% of hBN.
💡
Conclusion & Impact:Nanobiocomposites containing lignocellulose and hBN may berecommended for use in polymer matrix structures where thermal properties needto be altered.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study was conducted to evaluate the suitability of using hexagonal boronnitride (hBN) as reinforcement in natural fibres obtained from hazelnut shell (F)and poppy straw (H). Raw materials were treated with alkali to enrich the cellulosecontent by removing lignin and hemicellulose. The nanobiocomposite synthesiswas performed with 4% and 8% of hBN. Lignin, cellulose and hemicellulosescontents of biomass were determined. Cellulose content was almost increased3-fold and 2-fold after pretreatment of hazelnut shell (FCell) and poppy straw(HCell), respectively. Strong bands at 812 and 1380cm-1 corresponding tohBN were observed in the FTIR. SEM images showed that hBN is retainedon the pretreated natural fibres. Adsorbed hBN on the structure was highestin the microcrystalline cellulose (Cell) (91.5%), followed by FCell (80.5%) andHCell (50.5%). Nanobiocomposites containing lignocellulose and hBN may berecommended for use in polymer matrix structures where thermal properties needto be altered.

🔖

Cite This Article

AY, N., HOŞGÜN, E. Z., BOZAN, B., GÖNCÜ, Y. (2022). The nanobiocomposites synthesis from biomass and its characterization. Bor Dergisi, Cilt: 3 - Sayı: 2, 93–102. https://ajindex.com/articles/467452

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Sanchez-Garcia M. D., Lopez-Rubio A., Lagaron J. M., Natural micro and nanobiocomposites with enhanced barrier properties and novel functionalities for food biopackaging applications, Trends Food Sci. Technol. 21,528-36, 2010.
  2. Hosgun E. Z., Bozan B., Investigation of the effect of low temperature low time alkali pretreatment on hazelnut shells composition and enzymatic hydrolysis, J. Fac. Eng. Archit. Gaz. 32,517-29, 2017.
  3. Swain S. K., Dash S., Behera C., Kisku S. K., Behera L. Cellulose nanobiocomposites with reinforcement of boron nitride: Study of thermal, oxygen barrier and chemical resistant properties, Carbohydr. Polym., 95, 728-32, 2013.
  4. Pandey J. K., Kumar A. P., Misra M., Mohanty A. K., Drzal L. T., Singh R. P., Recent advances in biodegradable nanocomposites, J. Nanosci. Nanotechnol., 5,497-526, 2005.
  5. Tserki V., Matzinos P., Zafeiropoulos N. E., Panayiotou C., Development of biodegradable composites with treated and compatibilized lignocellulosic fibers, J. Appl. Polym. Sci., 100, 4703-10, 2006
  6. Spiridon I., Popa VI. Chapter 13 - Hemicelluloses: Major Sources, Properties and Applications A2 - Belgacem, Mohamed Naceur. In: Gandini A, editor. Monomers, Polymers and Composites from Renewable Resources. Amsterdam: Elsevier; p. 289-304, 2008.
  7. Pereira P. H. F., Rosa M. dF, Cioffi M. O. H, Benini K. C. C. dC., Milanese A. C., Voorwald H. J. C., et al, Vegetal fibers in polymeric composites: A review,Polímeros, 25,9-22, 2015. Corradini E., de Morais L., C., de F. Rosa M., Mazzetto S.E., Mattoso L. H. C., Agnelli J. A. M., A Preliminary Study for the Use of Natural Fibers as Reinforcement in Starch-Gluten-Glycerol Matrix, Macromolecular Symposia. 245-246, 558-64, 2006.
  8. Das S., Saha A. K., Choudhury P. K., Basak R. K., Mitra B. C., Todd T., et al. Effect of steam pretreatment of jute fiber on dimensional stability of jute composite. J. Appl. Polym. Sci., 76,1652-61, 2000.
  9. Jiang L., Hinrichsen G., Flax and cotton fiber reinforced biodegradable polyester amide composites, 1. Manufacture of composites and characterization of their mechanical properties, Die Angewandte Makromolekulare Chemie, 268,13-7, 1999.
  10. Plackett D., Løgstrup Andersen T., Batsberg Pedersen W., Nielsen L., Biodegradable composites based on lpolylactide and jute fibres, Compos. Sci. Technol., 63, 1287-96, 2003.
  11. Mohanty A. K., Wibowo A., Misra M., Drzal L. T., Effect of process engineering on the performance of natural fiber reinforced cellulose acetate biocomposites, Composites Part A, 35, 36